ฝึกพูดภาษาอังกฤษด้วยเทคนิค Shadowing จากวิดีโอ: Engineer's tool list

เลือกโหมดฝึก

แต่ละโหมดจะเปิดห้องฝึกแบบเต็มจอ

107 ประโยค
หากประโยคสั้นหรือยาวเกินไป กดที่ Edit เพื่อปรับแก้
1
Welcome to my latest video on learning technical and engineering English.
2
Today what I'm going to do is I'm going to go through some of the tools that are used in engineering
3
and I'll tell you the tools in English with a little explanation of how they're used.
4
So the first tool is a veneer caliper and the veneer caliper is to measure internal and external sizes
5
and here you can see the internal and external calipers.
6
External micrometer.
7
The external or outside micrometer is to measure outside sizes or diameters.
8
Internal micrometer.
9
Engineers use the internal micrometer to measure inside diameters.
10
Depth micrometer.
11
Engineers use the depth gauge micrometer to measure depths or how deep something is.
12
Dial gauge.
13
A dial gauge is to measure distance.
14
The measurement is on a clock called a dial.
15
Height gauge.
16
Height gauge is to measure the height of something, how high it is.
17
It is also used to mark an object object.
18
Surface table.
19
A surface table is a solid flat table used as the main horizontal reference for precision measurement marking or inspection.
20
Steel ruler.
21
Steel rulers are to measure distances or to rule straight lines.
22
Engineer squares.
23
An engineer square is to check a work piece is square, that is that two sides are at 90 degrees to one another.
24
Straight edge.
25
Straight edge is to check that surfaces are straight.
26
Scribing block.
27
Scribing block is used to check flat surfaces and to find the centre of the round bars.
28
Trammel or trammels.
29
Engineers trammel heads are for scribing arcs and circles.
30
Protractor.
31
Most protractors measure angles in degrees.
32
Ascriber.
33
Ascriber is a hand tool used in metalwork to mark lines on work pieces before you machine the piece.
34
V-block.
35
A V-block is to secure round or cylindrical items or work pieces.
36
Parallels.
37
Parallels are to support and accurately set jobs in vice or bolted to the machine table.
38
Angle plates.
39
Angle plates are used to hold a workpiece for marking or measuring.
40
Dividers.
41
Dividers are used for scribing circles on metal also used for measuring distances of markings.
42
Center punch.
43
A A center punch is to make small points used as markers for drilling.
44
Okay, so that's a list of some of the most used tools in engineering.
45
Stay tuned because the video will now give you a multi-choice quiz
46
so you can test to see what you've learned or can remember.
47
So, welcome to Engineering Tools Part 1, Multiple Choice Quiz.
48
This is where I'll show you a picture and ask you what the tool is.
49
You'll have a choice of three.
50
Before the answer is given, there is a short pause.
51
But if you need more time, of course, pause the video.
52
What's the name of this tool?
53
Micrometer, veneer caliper, depth gauge.
54
The answer is veneer caliper.
55
What's this called?
56
Dividers, protractor, steel rule.
57
The answer is a steel rule.
58
What are these?
59
Veneer calipers, trammels, dividers.
60
The answer is trammels.
61
What is this?
62
Depth micrometer, external micrometer, internal micrometer.
63
The answer is internal micrometer.
64
What's this tool called?
65
Dial gauge, depth gauge, height gauge.
66
This, the answer is, is dial gauge.
67
What's this tool?
68
Scribing block, height gauge, depth gauge.
69
The answer is height gauge.
70
What's this called?
71
Surface table, square, straight edge.
72
The answer is surface table.
73
What's the name of this tool?
74
Square, straight edge, steel ruler.
75
The answer is square.
76
What are these called?
77
Straight edges, steel rulers, parallels.
78
These are straight edges.
79
What's this called?
80
A height gauge, trammel, scribing block.
81
The answer is scribing block.
82
What's this?
83
Protractor, square, dividers.
84
The answer is protractor.
85
What's this tool?
86
Center punch, protractor, scriber.
87
The answer is scriber.
88
What are these?
89
V-blocks, parallels, angle plates.
90
The answer is V-blocks.
91
What are these?
92
Angle plates, straight edges, parallels.
93
These are parallels.
94
What's this?
95
Surface table, angle plate, B block.
96
The answer is angle plate.
97
What's this?
98
Dividers, scriber, protractor.
99
The answer is dividers.
100
This tool is Describer, Dividers, Centre Punch.
101
The answer is Centre Punch.
102
That's the end of the quiz.
103
I hope you enjoyed it.
104
Remember to do things again and again is the best way to learn and remember.
105
So why not do the test again?
106
Or watch the whole video again.
107
Thanks for watching.

ดาวน์โหลดแอป

ทุกอย่างที่ต้องใช้เพื่อพูดได้คล่อง

AI ให้คะแนนการออกเสียงให้คะแนนทุกประโยค
ฝึก IPAเชี่ยวชาญทุกเสียง
คำศัพท์สร้างคลังคำของคุณ
เกมคำศัพท์เล่นไปเรียนไป

ช่องเดียวกัน

FOR YOU

วิดีโอแนะนำ

คำศัพท์และข้อสังเกตด้านการพูดสำหรับบทเรียนนี้

บทเรียนฝึกพูดระดับ B1 นี้ใช้วิดีโอ “Engineer's tool list” เป็นสื่อ คำที่ถูกพูดซ้ำบ่อยที่สุด: answer, gauge, tool, micrometer, block วิดีโอนี้มี 107 ประโยค และ 716 คำ สำหรับฝึกพูดตาม ช่วงที่มีเสียงพูดยาว 7:36 ผู้พูดพูดช้า ประมาณ 94 คำต่อนาที จึงมีเวลาเลียนแบบทุกเสียง มีเพียง 75% ของคำที่อยู่ใน 3,000 คำที่ใช้บ่อยที่สุดในภาษาอังกฤษ คำศัพท์จึงค่อนข้างยาก จากทั้งหมด 107 ประโยค มี 17 ประโยคเป็นคำถาม จึงเหมาะสำหรับฝึกน้ำเสียงประโยคคำถามและการตอบสั้น ๆ

คำศัพท์สำคัญในวิดีโอนี้

คำที่ยากที่สุด 10 คำในวิดีโอ พร้อมคำอ่านและความหมาย:

คำศัพท์คำอ่านความหมาย
protractor คำนาม/pɹəˈtɹæktə(ɹ)/โพรแทรกเตอร์, ครึ่งวงกลม
scribe คำนาม/skɹaɪb/อาลักษณ์
parallel คำคุณศัพท์/ˈpæ.ɹəˌlɛl/ขนาน
punch คำนาม/pʌnt͡ʃ/หมัด
ruler คำนาม/ˈɹulɚ/ไม้บรรทัด
diameter คำนาม/daɪˈæmɪdɚ/เส้นผ่าศูนย์กลาง, เส้นผ่านศูนย์กลาง
horizontal คำคุณศัพท์/ˌhoɹəˈzɑn.təl/แนวราบ
bolt คำนาม/boʊlt/สลัก, กลอน
drill คำนาม/dɹɪl/สว่าน
tune คำนาม/tjuːn/ทำนอง

การออกเสียงที่ควรระวัง

ผู้พูดใช้รูปย่อและรูปลดเสียง 7 ครั้ง เช่น I'll, I'm, they're ให้พูดแบบสั้นตามที่ได้ยิน

  • เสียง “sh” และ “zh”: measurement /ˈmɛʒ.ə.mənt/, precision /pɹɪˈsɪʒ.ən/, inspection /ɪnˈspɛkʃən/
  • คำยาว — ลงเสียงหนักให้ถูกพยางค์: micrometer /maɪˈkɹɑmɪtəɹ/, diameter /daɪˈæmɪdɚ/, cylindrical /sɪˈlɪndɹɪkəl/, horizontal /ˌhoɹəˈzɑn.təl/, accurately /ˈæk.jə.ɹɪt.li/

วิธีฝึกกับวิดีโอนี้

  1. ฟังวิดีโอให้จบหนึ่งรอบโดยยังไม่ต้องพูด แล้วจดคำที่ยังไม่รู้จัก
  2. พูดตามทีละประโยคด้วยความเร็วปกติ ทำซ้ำแต่ละประโยคจนจังหวะของคุณตรงกับผู้พูด
  3. อัดเสียงตัวเองแล้วเทียบกับต้นฉบับ โดยสังเกตคำอย่าง protractor, scribe, parallel เป็นพิเศษ

เทคนิค Shadowing คืออะไร?

Shadowing เป็นเทคนิคการเรียนรู้ภาษาที่ได้รับการรับรองทางวิทยาศาสตร์ พัฒนาขึ้นสำหรับการฝึกนักแปลมืออาชีพ วิธีการนี้เรียบง่ายแต่ทรงพลัง: คุณฟังเสียงภาษาอังกฤษจากเจ้าของภาษาและพูดตามทันที — เหมือนเงาที่ตามผู้พูดด้วยช่วงเวลาห่าง 1-2 วินาที การวิจัยแสดงว่าเทคนิคนี้ปรับปรุงความแม่นยำในการออกเสียง ทำนองเสียง จังหวะ การเชื่อมเสียง การฟังเข้าใจ และความคล่องแคล่วในการพูดได้อย่างมีนัยสำคัญ

เทคนิค shadowing: อ่านคู่มือฉบับเต็มทีละขั้นตอน →