Практика Shadowing: Engineer's tool list - Изучайте разговорный английский по видео

Выберите режим практики

Каждый режим открывает полноэкранную комнату практики.

107 предложений
Если предложения слишком короткие или длинные, нажмите Edit, чтобы их изменить.
1
Welcome to my latest video on learning technical and engineering English.
2
Today what I'm going to do is I'm going to go through some of the tools that are used in engineering
3
and I'll tell you the tools in English with a little explanation of how they're used.
4
So the first tool is a veneer caliper and the veneer caliper is to measure internal and external sizes
5
and here you can see the internal and external calipers.
6
External micrometer.
7
The external or outside micrometer is to measure outside sizes or diameters.
8
Internal micrometer.
9
Engineers use the internal micrometer to measure inside diameters.
10
Depth micrometer.
11
Engineers use the depth gauge micrometer to measure depths or how deep something is.
12
Dial gauge.
13
A dial gauge is to measure distance.
14
The measurement is on a clock called a dial.
15
Height gauge.
16
Height gauge is to measure the height of something, how high it is.
17
It is also used to mark an object object.
18
Surface table.
19
A surface table is a solid flat table used as the main horizontal reference for precision measurement marking or inspection.
20
Steel ruler.
21
Steel rulers are to measure distances or to rule straight lines.
22
Engineer squares.
23
An engineer square is to check a work piece is square, that is that two sides are at 90 degrees to one another.
24
Straight edge.
25
Straight edge is to check that surfaces are straight.
26
Scribing block.
27
Scribing block is used to check flat surfaces and to find the centre of the round bars.
28
Trammel or trammels.
29
Engineers trammel heads are for scribing arcs and circles.
30
Protractor.
31
Most protractors measure angles in degrees.
32
Ascriber.
33
Ascriber is a hand tool used in metalwork to mark lines on work pieces before you machine the piece.
34
V-block.
35
A V-block is to secure round or cylindrical items or work pieces.
36
Parallels.
37
Parallels are to support and accurately set jobs in vice or bolted to the machine table.
38
Angle plates.
39
Angle plates are used to hold a workpiece for marking or measuring.
40
Dividers.
41
Dividers are used for scribing circles on metal also used for measuring distances of markings.
42
Center punch.
43
A A center punch is to make small points used as markers for drilling.
44
Okay, so that's a list of some of the most used tools in engineering.
45
Stay tuned because the video will now give you a multi-choice quiz
46
so you can test to see what you've learned or can remember.
47
So, welcome to Engineering Tools Part 1, Multiple Choice Quiz.
48
This is where I'll show you a picture and ask you what the tool is.
49
You'll have a choice of three.
50
Before the answer is given, there is a short pause.
51
But if you need more time, of course, pause the video.
52
What's the name of this tool?
53
Micrometer, veneer caliper, depth gauge.
54
The answer is veneer caliper.
55
What's this called?
56
Dividers, protractor, steel rule.
57
The answer is a steel rule.
58
What are these?
59
Veneer calipers, trammels, dividers.
60
The answer is trammels.
61
What is this?
62
Depth micrometer, external micrometer, internal micrometer.
63
The answer is internal micrometer.
64
What's this tool called?
65
Dial gauge, depth gauge, height gauge.
66
This, the answer is, is dial gauge.
67
What's this tool?
68
Scribing block, height gauge, depth gauge.
69
The answer is height gauge.
70
What's this called?
71
Surface table, square, straight edge.
72
The answer is surface table.
73
What's the name of this tool?
74
Square, straight edge, steel ruler.
75
The answer is square.
76
What are these called?
77
Straight edges, steel rulers, parallels.
78
These are straight edges.
79
What's this called?
80
A height gauge, trammel, scribing block.
81
The answer is scribing block.
82
What's this?
83
Protractor, square, dividers.
84
The answer is protractor.
85
What's this tool?
86
Center punch, protractor, scriber.
87
The answer is scriber.
88
What are these?
89
V-blocks, parallels, angle plates.
90
The answer is V-blocks.
91
What are these?
92
Angle plates, straight edges, parallels.
93
These are parallels.
94
What's this?
95
Surface table, angle plate, B block.
96
The answer is angle plate.
97
What's this?
98
Dividers, scriber, protractor.
99
The answer is dividers.
100
This tool is Describer, Dividers, Centre Punch.
101
The answer is Centre Punch.
102
That's the end of the quiz.
103
I hope you enjoyed it.
104
Remember to do things again and again is the best way to learn and remember.
105
So why not do the test again?
106
Or watch the whole video again.
107
Thanks for watching.

Скачать приложение

Всё для свободной речи

ИИ-оценка произношенияОценка каждой фразы
Практика IPAОсвойте каждый звук
СловарьСоберите свой словарный запас
Игра со словамиУчитесь играя

Тот же канал

FOR YOU

Рекомендуемое видео

Лексика и советы по произношению к этому уроку

Этот урок разговорной практики уровня B1 построен на видео «Engineer's tool list». Чаще всего повторяются слова: answer, gauge, tool, micrometer, block. В этом видео 107 предложений и 716 слов для шедоуинга. Речь длится 7:36. Говорящий говорит медленно, около 94 слов в минуту, поэтому есть время повторить каждый звук. Только 75% слов входят в 3000 самых частых слов английского языка, поэтому лексика сложная. Вопросов здесь 17 из 107 предложений, так что это хорошая тренировка вопросительной интонации и коротких ответов.

Ключевая лексика этого видео

Самые сложные слова из видео (15), с произношением и значением:

СловоПроизношениеЗначение
gauge существительное/ˈɡeɪd͡ʒ/ме́ра, кали́бр
micrometer существительное/maɪˈkɹɑmɪtəɹ/микро́метр гла́дкий, микро́метр
divider существительное/dɪˈvaɪdə(ɹ)/раздели́тель
protractor существительное/pɹəˈtɹæktə(ɹ)/транспорти́р, угломе́р
scribe существительное/skɹaɪb/пи́сарь, писе́ц
trammel существительное/ˈtræməl/поме́ха
parallel прилагательное/ˈpæ.ɹəˌlɛl/паралле́льный
veneer существительное/vəˈnɪɹ/шпон, односло́йная фане́ра
dial существительное/ˈdaɪ.əl/цифербла́т
punch существительное/pʌnt͡ʃ/уда́р
caliper существительное/ˈkælɪpɚ/су́ппорт
ruler существительное/ˈɹulɚ/лине́йка
quiz существительное/kwɪz/виктори́на, квиз
ascribe глагол/əˈskɹaɪb/припи́сывать, приписа́ть
calipers существительное/ˈkæl.ɪ.pɚz/штангенци́ркуль

Произношение, на которое стоит обратить внимание

Говорящий использует 7 сокращённых и редуцированных форм, например I'll, I'm, they're. Произносите их коротко, так, как слышите.

  • Звуки «sh» и «zh»: measurement /ˈmɛʒ.ə.mənt/, precision /pɹɪˈsɪʒ.ən/, inspection /ɪnˈspɛkʃən/
  • Длинные слова — следите за ударением: micrometer /maɪˈkɹɑmɪtəɹ/, diameter /daɪˈæmɪdɚ/, cylindrical /sɪˈlɪndɹɪkəl/, horizontal /ˌhoɹəˈzɑn.təl/, accurately /ˈæk.jə.ɹɪt.li/

Как заниматься с этим видео

  1. Прослушайте всё видео один раз молча и выпишите незнакомые слова.
  2. Повторяйте предложение за предложением на обычной скорости, пока ваш ритм не совпадёт с ритмом говорящего.
  3. Запишите себя и сравните с оригиналом, обращая внимание на такие слова, как gauge, micrometer, divider.

Что такое техника Shadowing?

Shadowing — это научно обоснованная техника изучения языка, изначально разработанная для подготовки профессиональных переводчиков и популяризированная полиглотом доктором Александром Аргуэльесом. Метод прост, но эффективен: вы слушаете аудио на английском от носителей языка и немедленно повторяете вслух — как тень, следующая за говорящим с задержкой в 1–2 секунды. В отличие от пассивного прослушивания или грамматических упражнений, Shadowing заставляет мозг и мышцы рта одновременно обрабатывать и воспроизводить реальные речевые паттерны. Исследования показывают, что это значительно улучшает точность произношения, интонацию, ритм, связную речь, понимание на слух и беглость речи — что делает его одним из самых эффективных методов для подготовки к IELTS Speaking и реального общения на английском.

Техника шедоуинга: читать полное пошаговое руководство →