Pratica di Shadowing: Engineer's tool list - Impara a parlare inglese con i video

Scegli una modalità di pratica

Ogni modalità apre una sala di pratica a schermo intero.

107 frasi
Se le frasi sono troppo corte o troppo lunghe, clicca su Edit per modificarle.
1
Welcome to my latest video on learning technical and engineering English.
2
Today what I'm going to do is I'm going to go through some of the tools that are used in engineering
3
and I'll tell you the tools in English with a little explanation of how they're used.
4
So the first tool is a veneer caliper and the veneer caliper is to measure internal and external sizes
5
and here you can see the internal and external calipers.
6
External micrometer.
7
The external or outside micrometer is to measure outside sizes or diameters.
8
Internal micrometer.
9
Engineers use the internal micrometer to measure inside diameters.
10
Depth micrometer.
11
Engineers use the depth gauge micrometer to measure depths or how deep something is.
12
Dial gauge.
13
A dial gauge is to measure distance.
14
The measurement is on a clock called a dial.
15
Height gauge.
16
Height gauge is to measure the height of something, how high it is.
17
It is also used to mark an object object.
18
Surface table.
19
A surface table is a solid flat table used as the main horizontal reference for precision measurement marking or inspection.
20
Steel ruler.
21
Steel rulers are to measure distances or to rule straight lines.
22
Engineer squares.
23
An engineer square is to check a work piece is square, that is that two sides are at 90 degrees to one another.
24
Straight edge.
25
Straight edge is to check that surfaces are straight.
26
Scribing block.
27
Scribing block is used to check flat surfaces and to find the centre of the round bars.
28
Trammel or trammels.
29
Engineers trammel heads are for scribing arcs and circles.
30
Protractor.
31
Most protractors measure angles in degrees.
32
Ascriber.
33
Ascriber is a hand tool used in metalwork to mark lines on work pieces before you machine the piece.
34
V-block.
35
A V-block is to secure round or cylindrical items or work pieces.
36
Parallels.
37
Parallels are to support and accurately set jobs in vice or bolted to the machine table.
38
Angle plates.
39
Angle plates are used to hold a workpiece for marking or measuring.
40
Dividers.
41
Dividers are used for scribing circles on metal also used for measuring distances of markings.
42
Center punch.
43
A A center punch is to make small points used as markers for drilling.
44
Okay, so that's a list of some of the most used tools in engineering.
45
Stay tuned because the video will now give you a multi-choice quiz
46
so you can test to see what you've learned or can remember.
47
So, welcome to Engineering Tools Part 1, Multiple Choice Quiz.
48
This is where I'll show you a picture and ask you what the tool is.
49
You'll have a choice of three.
50
Before the answer is given, there is a short pause.
51
But if you need more time, of course, pause the video.
52
What's the name of this tool?
53
Micrometer, veneer caliper, depth gauge.
54
The answer is veneer caliper.
55
What's this called?
56
Dividers, protractor, steel rule.
57
The answer is a steel rule.
58
What are these?
59
Veneer calipers, trammels, dividers.
60
The answer is trammels.
61
What is this?
62
Depth micrometer, external micrometer, internal micrometer.
63
The answer is internal micrometer.
64
What's this tool called?
65
Dial gauge, depth gauge, height gauge.
66
This, the answer is, is dial gauge.
67
What's this tool?
68
Scribing block, height gauge, depth gauge.
69
The answer is height gauge.
70
What's this called?
71
Surface table, square, straight edge.
72
The answer is surface table.
73
What's the name of this tool?
74
Square, straight edge, steel ruler.
75
The answer is square.
76
What are these called?
77
Straight edges, steel rulers, parallels.
78
These are straight edges.
79
What's this called?
80
A height gauge, trammel, scribing block.
81
The answer is scribing block.
82
What's this?
83
Protractor, square, dividers.
84
The answer is protractor.
85
What's this tool?
86
Center punch, protractor, scriber.
87
The answer is scriber.
88
What are these?
89
V-blocks, parallels, angle plates.
90
The answer is V-blocks.
91
What are these?
92
Angle plates, straight edges, parallels.
93
These are parallels.
94
What's this?
95
Surface table, angle plate, B block.
96
The answer is angle plate.
97
What's this?
98
Dividers, scriber, protractor.
99
The answer is dividers.
100
This tool is Describer, Dividers, Centre Punch.
101
The answer is Centre Punch.
102
That's the end of the quiz.
103
I hope you enjoyed it.
104
Remember to do things again and again is the best way to learn and remember.
105
So why not do the test again?
106
Or watch the whole video again.
107
Thanks for watching.

Scarica l'app

Tutto ciò che serve per parlare fluentemente

Pronuncia con IAVoto per ogni frase
Pratica IPAPadroneggia ogni suono
VocabolarioCostruisci il tuo lessico
Gioco di vocabolarioImpara giocando

Stesso Canale

FOR YOU

Video consigliato

Vocabolario e note di pronuncia per questa lezione

Questa lezione di conversazione di livello B1 si basa sul video “Engineer's tool list”. Le parole che ritornano più spesso: answer, gauge, tool, micrometer, block. Questo video contiene 107 frasi e 716 parole da ripetere con lo shadowing. Il parlato dura 7:36. Chi parla lo fa lentamente, circa 94 parole al minuto, quindi c’è tempo per imitare ogni suono. Solo il 75% delle parole rientra nelle 3.000 più comuni dell’inglese, quindi il lessico è impegnativo. 17 delle sue 107 frasi sono domande: un buon esercizio per l’intonazione interrogativa e le risposte brevi.

Vocaboli chiave di questo video

Le 15 parole più avanzate del video, con pronuncia e significato:

ParolaPronunciaSignificato
gauge sostantivo/ˈɡeɪd͡ʒ/calibro, unità di misura
micrometer sostantivo/maɪˈkɹɑmɪtəɹ/micrometro
divider sostantivo/dɪˈvaɪdə(ɹ)/divisore
protractor sostantivo/pɹəˈtɹæktə(ɹ)/goniometro, protrattore
scribe sostantivo/skɹaɪb/scrivano, scriba
trammel sostantivo/ˈtræməl/rete
parallel aggettivo/ˈpæ.ɹəˌlɛl/parallelo
veneer sostantivo/vəˈnɪɹ/impiallacciatura, rivestimento decorativo
punch sostantivo/pʌnt͡ʃ/pugno
ruler sostantivo/ˈɹulɚ/righello
scriber sostantivopunta, graffietto
quiz sostantivo/kwɪz/quiz
ascribe verbo/əˈskɹaɪb/ascrivere
pause sostantivo/pɔːz/pausa
measurement sostantivo/ˈmɛʒ.ə.mənt/misurazione, misura

I phrasal verb che sentirai

ParolaSignificato
go through verboattraversare

Pronuncia a cui fare attenzione

Chi parla usa 7 contrazioni e forme ridotte, come I'll, I'm, they're. Pronunciale nella forma breve, così come le senti.

  • I suoni “sh” e “zh”: measurement /ˈmɛʒ.ə.mənt/, precision /pɹɪˈsɪʒ.ən/, inspection /ɪnˈspɛkʃən/
  • Parole lunghe — attenzione all’accento: micrometer /maɪˈkɹɑmɪtəɹ/, diameter /daɪˈæmɪdɚ/, cylindrical /sɪˈlɪndɹɪkəl/, horizontal /ˌhoɹəˈzɑn.təl/, accurately /ˈæk.jə.ɹɪt.li/

Come esercitarsi con questo video

  1. Ascolta tutto il video una volta senza parlare e annota le parole che non conosci.
  2. Fai shadowing frase per frase a velocità normale, ripetendo ognuna finché il tuo ritmo coincide con quello di chi parla.
  3. Registrati e confronta con l’originale, facendo attenzione a parole come gauge, micrometer, divider.

Cos'è la tecnica dello Shadowing?

Shadowing è una tecnica di apprendimento delle lingue supportata da studi scientifici, originariamente sviluppata per la formazione dei traduttori professionisti e resa popolare dal poliglotta Dr. Alexander Arguelles. Il metodo è semplice ma potente: ascolti un audio in inglese di madrelingua e lo ripeti immediatamente ad alta voce — come un'ombra che segue il parlante con un ritardo di solo 1–2 secondi. A differenza dell'ascolto passivo o degli esercizi di grammatica, lo shadowing costringe il tuo cervello e i muscoli della bocca a elaborare e riprodurre simultaneamente i modelli di discorso reale. La ricerca dimostra che migliora significativamente la precisione della pronuncia, l'intonazione, il ritmo, il discorso connesso, la comprensione dell'ascolto e la fluidità del parlato — rendendolo uno dei metodi più efficaci per la preparazione alla prova di speaking dell'IELTS e per la comunicazione reale in inglese.

Tecnica dello shadowing: leggi la guida completa passo dopo passo →