Luyện nói tiếng Anh bằng Shadowing qua video: Engineer's tool list

Chọn chế độ luyện tập

Mỗi chế độ mở một phòng luyện tập toàn màn hình.

107 câu
Nếu các câu quá ngắn hoặc quá dài, hãy bấm Edit để chỉnh sửa.
1
Welcome to my latest video on learning technical and engineering English.
2
Today what I'm going to do is I'm going to go through some of the tools that are used in engineering
3
and I'll tell you the tools in English with a little explanation of how they're used.
4
So the first tool is a veneer caliper and the veneer caliper is to measure internal and external sizes
5
and here you can see the internal and external calipers.
6
External micrometer.
7
The external or outside micrometer is to measure outside sizes or diameters.
8
Internal micrometer.
9
Engineers use the internal micrometer to measure inside diameters.
10
Depth micrometer.
11
Engineers use the depth gauge micrometer to measure depths or how deep something is.
12
Dial gauge.
13
A dial gauge is to measure distance.
14
The measurement is on a clock called a dial.
15
Height gauge.
16
Height gauge is to measure the height of something, how high it is.
17
It is also used to mark an object object.
18
Surface table.
19
A surface table is a solid flat table used as the main horizontal reference for precision measurement marking or inspection.
20
Steel ruler.
21
Steel rulers are to measure distances or to rule straight lines.
22
Engineer squares.
23
An engineer square is to check a work piece is square, that is that two sides are at 90 degrees to one another.
24
Straight edge.
25
Straight edge is to check that surfaces are straight.
26
Scribing block.
27
Scribing block is used to check flat surfaces and to find the centre of the round bars.
28
Trammel or trammels.
29
Engineers trammel heads are for scribing arcs and circles.
30
Protractor.
31
Most protractors measure angles in degrees.
32
Ascriber.
33
Ascriber is a hand tool used in metalwork to mark lines on work pieces before you machine the piece.
34
V-block.
35
A V-block is to secure round or cylindrical items or work pieces.
36
Parallels.
37
Parallels are to support and accurately set jobs in vice or bolted to the machine table.
38
Angle plates.
39
Angle plates are used to hold a workpiece for marking or measuring.
40
Dividers.
41
Dividers are used for scribing circles on metal also used for measuring distances of markings.
42
Center punch.
43
A A center punch is to make small points used as markers for drilling.
44
Okay, so that's a list of some of the most used tools in engineering.
45
Stay tuned because the video will now give you a multi-choice quiz
46
so you can test to see what you've learned or can remember.
47
So, welcome to Engineering Tools Part 1, Multiple Choice Quiz.
48
This is where I'll show you a picture and ask you what the tool is.
49
You'll have a choice of three.
50
Before the answer is given, there is a short pause.
51
But if you need more time, of course, pause the video.
52
What's the name of this tool?
53
Micrometer, veneer caliper, depth gauge.
54
The answer is veneer caliper.
55
What's this called?
56
Dividers, protractor, steel rule.
57
The answer is a steel rule.
58
What are these?
59
Veneer calipers, trammels, dividers.
60
The answer is trammels.
61
What is this?
62
Depth micrometer, external micrometer, internal micrometer.
63
The answer is internal micrometer.
64
What's this tool called?
65
Dial gauge, depth gauge, height gauge.
66
This, the answer is, is dial gauge.
67
What's this tool?
68
Scribing block, height gauge, depth gauge.
69
The answer is height gauge.
70
What's this called?
71
Surface table, square, straight edge.
72
The answer is surface table.
73
What's the name of this tool?
74
Square, straight edge, steel ruler.
75
The answer is square.
76
What are these called?
77
Straight edges, steel rulers, parallels.
78
These are straight edges.
79
What's this called?
80
A height gauge, trammel, scribing block.
81
The answer is scribing block.
82
What's this?
83
Protractor, square, dividers.
84
The answer is protractor.
85
What's this tool?
86
Center punch, protractor, scriber.
87
The answer is scriber.
88
What are these?
89
V-blocks, parallels, angle plates.
90
The answer is V-blocks.
91
What are these?
92
Angle plates, straight edges, parallels.
93
These are parallels.
94
What's this?
95
Surface table, angle plate, B block.
96
The answer is angle plate.
97
What's this?
98
Dividers, scriber, protractor.
99
The answer is dividers.
100
This tool is Describer, Dividers, Centre Punch.
101
The answer is Centre Punch.
102
That's the end of the quiz.
103
I hope you enjoyed it.
104
Remember to do things again and again is the best way to learn and remember.
105
So why not do the test again?
106
Or watch the whole video again.
107
Thanks for watching.

Tải Ứng Dụng

Mọi thứ bạn cần để nói trôi chảy

Chấm điểm AIChấm từng câu nói
Luyện IPAThành thạo mọi âm
Từ vựngMở rộng vốn từ
Game Từ vựngHọc qua chơi

Cùng kênh

FOR YOU

Video gợi ý

Từ vựng và ghi chú luyện nói cho bài học này

Bài luyện nói trình độ B1 này dựa trên video “Engineer's tool list”. Những từ được nhắc lại nhiều nhất trong bài: answer, gauge, tool, micrometer, block. Video này có 107 câu và 716 từ để luyện shadowing. Phần lời nói dài 7:36. Người nói nói chậm, khoảng 94 từ mỗi phút, đủ thời gian để bạn bắt chước từng âm. Chỉ 75% số từ nằm trong 3.000 từ tiếng Anh thông dụng nhất, nên từ vựng khá khó. 17 trong 107 câu là câu hỏi, nên bài này hợp để luyện ngữ điệu câu hỏi và cách trả lời ngắn.

Từ vựng quan trọng trong video

12 từ khó nhất trong video, kèm phiên âm và nghĩa:

TừPhiên âmNghĩa
protractor danh từ/pɹəˈtɹæktə(ɹ)/thước đo góc
scribe danh từ/skɹaɪb/thư lại
punch danh từ/pʌnt͡ʃ/cú đấm
ruler danh từ/ˈɹulɚ/thước kẻ, thước
quiz danh từ/kwɪz/đố vui
diameter danh từ/daɪˈæmɪdɚ/đường kính
horizontal tính từ/ˌhoɹəˈzɑn.təl/ngang
bolt danh từ/boʊlt/bu lông
drill danh từ/dɹɪl/máy khoan
inspection danh từ/ɪnˈspɛkʃən/sự kiểm tra
arc danh từ/ɑɹk/vòng cung
tune danh từ/tjuːn/điệu nhạc, âm điệu

Phát âm cần chú ý

Người nói dùng 7 dạng rút gọn, ví dụ I'll, I'm, they're. Hãy nói theo dạng ngắn đúng như bạn nghe.

  • Âm “sh” và “zh”: measurement /ˈmɛʒ.ə.mənt/, precision /pɹɪˈsɪʒ.ən/, inspection /ɪnˈspɛkʃən/
  • Từ dài — đặt trọng âm cho đúng: micrometer /maɪˈkɹɑmɪtəɹ/, diameter /daɪˈæmɪdɚ/, cylindrical /sɪˈlɪndɹɪkəl/, horizontal /ˌhoɹəˈzɑn.təl/, accurately /ˈæk.jə.ɹɪt.li/

Cách luyện với video này

  1. Nghe hết video một lần, chưa cần nói, và ghi lại những từ bạn chưa biết.
  2. Nói đuổi từng câu ở tốc độ bình thường, lặp lại mỗi câu đến khi nhịp của bạn khớp với người nói.
  3. Ghi âm giọng mình rồi so với bản gốc, chú ý các từ như protractor, scribe, punch.

Phương Pháp Shadowing Là Gì?

Shadowing là kỹ thuật học ngôn ngữ có cơ sở khoa học, ban đầu được phát triển cho chương trình đào tạo phiên dịch viên chuyên nghiệp và được phổ biến rộng rãi bởi nhà đa ngôn ngữ học Dr. Alexander Arguelles. Nguyên lý cốt lõi đơn giản nhưng cực kỳ hiệu quả: bạn nghe tiếng Anh của người bản xứ và lặp lại to ngay lập tức — như một "cái bóng" (shadow) đuổi theo người nói với độ trễ chỉ 1–2 giây. Khác với luyện ngữ pháp hay học từ vựng bị động, Shadowing buộc não bộ và cơ miệng phải đồng thời xử lý và tái tạo ngôn ngữ thực tế. Các nghiên cứu khoa học xác nhận phương pháp này cải thiện đáng kể phát âm, ngữ điệu, nhịp điệu, nối âm, kỹ năng nghe và độ lưu loát khi nói — đặc biệt hiệu quả cho người luyện IELTS Speaking và muốn giao tiếp tiếng Anh tự nhiên như người bản ngữ.

Phương pháp shadowing: đọc hướng dẫn từng bước đầy đủ →