Pratique du Shadowing: Car Engine Parts & Their Functions Explained in Details | The Engineers Post - Apprendre l'anglais à l'oral avec la vidéo
Choisissez un mode d'entraînement
Chaque mode ouvre une salle d'entraînement en plein écran.
150 phrases
Si les phrases sont trop courtes ou trop longues, cliquez sur Edit pour les ajuster.
1
An engine is a machine designed to convert one form of energy into mechanical energy.
2
Heat engines burn fuel to create heat which is then used to do work.
3
It is a complex machine built to convert heat from burning gas into the force that turns the wheels.
4
The chain of reactions that achieve that objective is set in motion by a spark, which ignites a mixture of petrol,
5
vapor, and compressed air inside a momentarily sealed cylinder, and causes it to burn rapidly.
6
The engine has two types, one is the internal combustion engine, and another one is the external combustion engine.
7
The internal combustion engine is those heat engines that burn their fuel inside the engine cylinder.
8
External combustion engines are those heat engine that burns their fuel outside the cylinder.
9
The engine is one of the most essential parts of the automobile industries
10
or we can also say that the engine is the heart of an automobile.
11
So in this video we'll take a look at the function and construction of each engine parts of an internal combustion engine.
12
So be sure to like this video subscribe to the channel
13
and press the bell icon to get notifications of our new videos.
14
The main parts of an car engine are cylinder block,
15
cylinder head, oil pan, Manifolds Gasket
16
And Piston A piston ring Piston
17
pin Connecting rod Crankshaft Camshaft Flywheels Rod bearing Main bearings And bearing caps
18
Now let's take a look at each of engine parts with details starting with cylinder block.
19
It is the basic framework for the engine and one of the main part of an engine.
20
A cylinder block consists of three parts.
21
The cylinder in which the piston slid up and down, the port or opening for the valves, the passages for the flow of cooling water.
22
The cylinder block is usually made of gray cast iron
23
or aluminium and its alloys while the crank case is fixed to its bottom.
24
Apart from these other parts like timing gear, water pump, ignition distributor, flywheel,
25
fuel pump are also attached to it.
26
Coolant passages are provided in the cylinder walls for the circulation of cooling waters.
27
Cylinder block also carries lubrication oil to various components through drilled passages that is called oil galleries.
28
Cylinder head.
29
The cylinder head is another main part of an engine.
30
It is a joint between the cylinder head and cylinder block.
31
It is usually made up of cast iron and aluminium alloy.
32
The cylinder head is attached to the cylinder block using studs fixed to the block gaskets, which are used to provide a tight leak proof joint between the head and block.
33
The cylinder head contains a combustion chamber above each cylinder, and it also contains valve guides,
34
valve seats, ports, coolant jackets, and threaded holes, four spark plugs.
35
It incorporates passages for the flow of cooling water.
36
There are three different types of cylinder head is available that depends upon the valve and port layout.
37
Loop flow type, offset cross flow type and inline cross flow type.
38
In the loop flow type, the inlet and the exhaust manifolds are on the same side, which facilitates preheating of the intake air.
39
In the offset cross flow type, the inlet and the exhaust manifolds are placed on different sides of the cylinder head.
40
In the inline cross flow type, the valve is positioned transversely and usually inclined to each other,
41
while the inlet and the exhaust manifolds are on different sides of the cylinder head.
42
This arrangement gives better performance, but it is costlier.
43
Crank case.
44
The oil pan and the lower part of the cylinder block together are called the crankcase.
45
It is the bottom portion of the cylinder block, in which the crankshaft is fitted.
46
This is a rigid construction made of grey cast iron or aluminium.
47
Either it can be cast integrally with the block, or can be cast separately, and attached to the block with bolts.
48
The crankcase is shaped simply like a box, having no bottom surface.
49
The function of the crankcase is to provide support for the main journals and bearing of the crankshaft,
50
rigidly maintaining the alignment of their axes of rotation under various engine loads.
51
Oil Pan The bottom half of the crankcase is called the oil pan or sump.
52
It is attached to the crankcase through set screws and with a gasket to make the joint leak proof.
53
The oil pan serves as a reservoir for the storage, cooling, and ventilation of engine lubricating oil.
54
At the bottom of the oil sump, a drain plug is provided to drain out the dirty oil, at the time of oil replacement.
55
Generally, the sump is made of pressed steel sheet, or aluminium alloy casting is also used.
56
The oil pump in the lubricating system draws oil from the oil pan, and sends it to all working parts in the engine.
57
The oil drains off and runs down into the pan.
58
Thus, there is a constant circulation of oil between the pan and the working parts of the engine.
59
Manifolds There are separate sets of pipes attached to the cylinder head, which carries the air -fuel mixture and the exhaust gases, these are called manifolds.
60
It is generally made of cast iron, so that it can withstand the high temperature of the exhaust gases.
61
Gaskets Gaskets are used to provide a tight fitting joint between two surfaces.
62
Gaskets are found in the joint between the cylinder head and the cylinder block, between the crankcase and oil pan,
63
and in between the cylinder block and manifold.
64
materials used for gaskets are cork asbestos rubber gaskets produced by
65
the fuel pro USA are cylinder head gaskets oil pan gaskets manifold gaskets
66
and pump gaskets cylinder liners the cylindrical shape liners are used to avoid the cylinder wear.
67
It is one of the most important functional part to make up the interior of an engine.
68
Cylinder liners can be replaced after they are worn out.
69
These are made of special alloy iron containing silicon, manganese, nickel and chromium.
70
Usually these are cast centrifugally.
71
These liners resistance to wear and corrosion and are the oil hardening type that offers considerably longer life for the engine.
72
There are two types of cylinder liners will be available, they are dry liners and wet liners.
73
Dry liner is made in the shape of a barrel with a flange at the top which keeps it into position.
74
The entire outer surface bears against the cylinder block casting and hence these are machined accurately at both outer and interfaces.
75
Wet liners will be in direct contact with the cooling water at their outer face.
76
Because of this, these liners need not be machined very accurately at the outer surface.
77
However, they have been machined accurately at the inner surface.
78
Pistons.
79
These are the most important engine parts compared to others.
80
The piston is a cylindrical plug that moves up and down in the cylinder.
81
It helps to convert pressure energy obtained by the combustion of fuel into useful mechanical power
82
and it transfer this power to the crankshaft through the connecting rod.
83
The highest position of the piston reaches in the cylinder is called the top dead center
84
and the lowest position it reaches is called the bottom dead center.
85
It is provided with about three to five piston rings that provides a good seal between the cylinder wall and piston.
86
The efficiency and economy of the engine is primarily depend on the working of the piston.
87
The material used for the piston is mainly cast iron and aluminium alloy.
88
It may be either cast or forged.
89
The piston is usually small in diameter than the bore of the cylinder.
90
The space between the cylinder and the cylinder wall is called the piston clearance.
91
This piston clearance provides a space for a layer of lubricant between the piston
92
and cylinder wall to reduce friction generally pissed Piston clearance is 0 .025 mm to 0 .100 mm.
93
Piston Rings
94
The piston rings are fitted into the grooves of the piston to maintain a good seal between the piston
95
and the cylinder wall.
96
The function of piston rings is to form a seal for
97
the high -pressure gases from the combustion chamber entering into the crankcase.
98
The material generally used for piston rings is fine -grained alloy cast iron containing silicon and manganese.
99
It has good heat and wear -resisting qualities.
100
Mainly there are two types of piston rings available.
101
They are compression rings and oil control rings.
102
The number of piston rings used is about two to four compression rings and one to two oil control ring was used.
103
Connecting Rod It is fitted in between the piston and crankshaft.
104
The main function of the connecting rod is to convert the
105
reciprocating motion of the piston into the rotary motion of the crankshaft.
106
Connecting rod in an IC engine is must be light and strong enough to withstand stress and twisting forces.
107
It usually has I -beam cross section and is made of alloy steel of duralumin by drop forging.
108
The small end of the connecting rod has either a solid eye used to connect the piston by the piston pin.
109
The big end of the connecting rod is always split and it is used to connect the crank pin of the crankshaft.
110
Piston Pin The piston pin is also called wrist pin or gudgeon pin.
111
It is used for connecting the small end of the connecting rod and the piston.
112
It is made hollow to reduce weight and it is made from case hardened steel.
113
Mainly there are three types of piston pins available.
114
They are set screw types piston pin.
115
This pin is fastened to the piston by a set screw.
116
Semi -floating piston pin.
117
It is fastened to the connecting rod with the clamp screw.
118
Fully floating piston pin.
119
The pin floats in both the piston bosses and the small end of connecting rod.
120
It is prevented from coming in contact with the cylinder wall by two circlips.
121
Crankshaft.
122
The crankshaft is the engine component from which the power is taken.
123
It is one of the main power transmission sources in all engine parts.
124
It is the first part of the power transmission system, in which the reciprocating motion of the piston is converted into the rotating motion with the help of connecting rod.
125
The crankshaft is made of casting or forging of heat -treated alloy steel and is machined.
126
A crankshaft consists of crankpins, weds, balancing weight and main journals, and oil holes.
127
The front end of the crankshaft carries three devices.
128
They are a gear that drives the camshaft, the vibration damper to control torsional vibration, and the fan belt pulley.
129
This pulley drives the engine fan, water pump, and generator with a V -belt.
130
The rear end of the crankshaft carries flywheel.
131
The flywheel tends to keep the crankshaft running at constant.
132
Camshaft A camshaft is a shaft on which cams are mounted.
133
A cam is a device that changes the rotary motion of the camshaft into the linear motion of the follower.
134
It is responsible for the opening of the valves.
135
A camshaft has several cams along the length.
136
The camshaft is driven by the crankshaft.
137
And it has twice the gears as many teeth as the gear on the crankshaft
138
and it turns at half the speed of the crankshaft.
139
Camshaft made from forged alloy steel.
140
There are three types of the camshaft drive mechanism.
141
They are gear drive, chain drive and belt drive.
142
Flywheel The flywheel used in a transmission system of a vehicle.
143
A flywheel is a heavy steel wheel attached to the rear end of the crankshaft.
144
The size of the flywheel depends upon the number of cylinders and the construction of the engine.
145
The inertia of the flywheel tends to keep the running of the crankshaft at a constant speed.
146
Engine valves These are essential to control the timing of air fuel mixture, entry into the cylinder, and combustion products out of the cylinders.
147
Engine valves are located at the inlet and outlet opening of the engine cylinder.
148
The valves fit on the valve seats in their closed position.
149
Then please share it with your friends.
150
Subscribe to our channel and press the bell icon to get notification of our new videos.
Télécharger l'application
Tout pour parler couramment
Prononciation IAChaque phrase notée
Phonétique (IPA)Maîtrisez chaque son
VocabulaireEnrichissez votre lexique
Jeu de vocabulaireApprenez en jouant
✨ Vidéo recommandée
B21
107 phrases
Engineer's tool list
Daily ConversationUniversity StudentsWorking Adults
C11
59 phrases
How does a Thermal power plant work?
Daily ConversationUniversity Students
B11
16 phrases
What is a kernel? (Briefly explained)
Daily ConversationUniversity Students
B11
135 phrases
Human Organ Systems Anatomy | 10 Systems in Human Body 3D Animation Video
Daily ConversationUniversity Students
B21
132 phrases
How A Car Engine Works
Daily ConversationWorking Adults
B21
162 phrases
Introduction to PLC | Siemens PLC Training Course
Daily ConversationUniversity Students
B21
132 phrases
Video
Daily ConversationUniversity StudentsWorking Adults
B21
183 phrases
Concept of Electric Current with Train example | TheElectricalGuy
Daily ConversationUniversity Students
B237 phrases
Embedded Systems Explained in 3 minutes
Daily ConversationUniversity Students
B23
11 phrases
Sales Engineer Career Video
Daily ConversationUniversity StudentsWorking Adults
B21
22 phrases
Introduction To Networking - Different Types Of Networks | Networking Fundamentals Part 2 (revised)
Daily ConversationUniversity Students
B21
13 phrases
What is an API?
Daily ConversationUniversity StudentsWorking Adults
Vocabulaire et conseils d’expression pour cette leçon
Cette leçon d’expression orale de niveau C1 s’appuie sur la vidéo « Car Engine Parts & Their Functions Explained in Details ». Les mots qui reviennent le plus souvent : cylinder, piston, engine, oil, crankshaft. Cette vidéo contient 150 phrases et 2058 mots à répéter en shadowing. La partie parlée dure 15:23. Le locuteur parle à un rythme régulier d’environ 134 mots par minute, confortable pour le shadowing. Seuls 72 % des mots font partie des 3 000 mots les plus courants en anglais, le vocabulaire est donc exigeant.
Vocabulaire clé de cette vidéo
Les 15 mots les plus avancés de la vidéo, avec leur prononciation et leur sens :
| Mot | Prononciation | Sens |
|---|---|---|
| cylinder nom | /ˈsɪləndɚ/ | cylindre |
| piston nom | /ˈpɪstən/ | piston |
| crankshaft nom | vilebrequin | |
| gasket nom | /ˈɡæs.kɪt/ | garcette |
| camshaft nom | /ˈkæmʃæft/ | arbre à cames |
| combustion nom | /kəmˈbʌs.t͡ʃən/ | combustion |
| alloy nom | /ˈæ.lɔɪ/ | alliage |
| flywheel nom | volant, volant d'inertie | |
| manifold adjectif | /ˈmænɪˌfoʊld/ | divers |
| crankcase nom | carter | |
| aluminium nom | /ˌæl.(j)uˈmɪn.i.əm/ | aluminium |
| exhaust verbe | /ɪɡˈzɔst/ | épuiser |
| inlet nom | /ˈɪnlət/ | crique, bras de rivière |
| forge nom | /fɔɹd͡ʒ/ | forge |
| sump nom | /sʌmp/ | bassin, fosse d'aisances |
Les verbes à particule que vous entendrez
| Mot | Prononciation | Sens |
|---|---|---|
| make up verbe | /ˌmeɪk ˈʌp/ | constituer, composer |
| wear out verbe | user |
La grammaire de cette vidéo
Les structures que le locuteur utilise le plus, avec les mots exacts de la vidéo :
| Structure | Dans la vidéo |
|---|---|
| Voix passive be + participe passé — l’accent est mis sur ce qui arrive, pas sur qui le fait | is set · is usually made · is fixed |
| Propositions relatives who / which + proposition — une précision sur une personne ou une chose | heat which is · gaskets, which are |
Prononciation à surveiller
- Les sons « sh » et « zh »: camshaft /ˈkæmʃæft/, vibration /vaɪˈbɹeɪʃən/, compression /kəmˈpɹɛʃ.ən/, notification /ˌnoʊtɪfɪˈkeɪʃn̩/, circulation /ˌsɝkjʊˈleɪʃən/
- Mots longs — placez bien l’accent: aluminium /ˌæl.(j)uˈmɪn.i.əm/, accurately /ˈæk.jə.ɹɪt.li/, cylindrical /sɪˈlɪndɹɪkəl/, reciprocate /ɹɪˈsɪpɹəˌkeɪt/, notification /ˌnoʊtɪfɪˈkeɪʃn̩/
Les sons difficiles pour les francophones :
- /h/ — il se souffle, il n’est pas muet: harden /ˈhɑɹdn̩/, hollow /ˈhɑloʊ/
- /tʃ/ et /dʒ/ — à ne pas adoucir en « ch » et « j »: combustion /kəmˈbʌs.t͡ʃən/, forge /fɔɹd͡ʒ/, flange /ˈflænd͡ʒ/, gudgeon /ˈɡʌd͡ʒən/, rigid /ˈɹɪd͡ʒ.ɪd/
- /r/ anglais — langue recourbée, sans frotter la gorge: forge /fɔɹd͡ʒ/, crank /ˈkɹæŋk/, accurately /ˈæk.jə.ɹɪt.li/, drain /dɹiːn/, cylindrical /sɪˈlɪndɹɪkəl/
Comment s’entraîner avec cette vidéo
- Écoutez la vidéo en entier une fois sans parler et notez les mots que vous ne connaissez pas.
- Répétez phrase par phrase à vitesse normale, en reprenant chacune jusqu’à ce que votre rythme corresponde à celui du locuteur.
- Enregistrez-vous et comparez avec l’original, en faisant attention à des mots comme cylinder, piston, crankshaft.
Qu'est-ce que la technique du Shadowing ?
Le Shadowing est une technique d'apprentissage des langues fondée sur la science, développée à l'origine pour la formation des interprètes professionnels. Le principe est simple mais puissant : vous écoutez de l'anglais natif et le répétez immédiatement à voix haute — comme une ombre suivant le locuteur avec un décalage de 1 à 2 secondes. Les recherches montrent une amélioration significative de la précision de la prononciation, de l'intonation, du rythme, des liaisons, de la compréhension orale et de la fluidité.