ฝึกพูดภาษาอังกฤษด้วยเทคนิค Shadowing จากวิดีโอ: Building the world's largest WORKING iPhone!
เลือกโหมดฝึก
แต่ละโหมดจะเปิดห้องฝึกแบบเต็มจอ
371 ประโยค
หากประโยคสั้นหรือยาวเกินไป กดที่ Edit เพื่อปรับแก้
1
Aaron here has set me the biggest challenge of my entire YouTube career, building the world's largest iPhone.
2
Pretty much everyone's familiar with the iPhone, but why on earth build a giant one?
3
Well, we are just about to overtake Apple in subscribers on our YouTube channel, and we need something to commemorate the moment.
4
This is a huge deal, considering that it's a small team versus a massive corporation.
5
However, building the world's literal largest iPhone, I have a feeling it's not going to be easy.
6
Every component on the phone has to be fully functional.
7
The screen, cameras, speakers, even the buttons.
8
All of it needs to be made on a giant scale.
9
This is a project you don't want to miss.
10
We're aiming for the stars here.
11
So the screen we're going to be using for this project is in fact an 88 inch OLED TV.
12
And being OLED, it should match the iPhone in image quality, which would be really good.
13
But one feature it's missing is obviously touch capabilities.
14
It's a TV.
15
Of course it's not going to have touchscreen.
16
Now, you can get large format touchscreen displays, but they're all based on dated LCD technology, and that will not do for this project.
17
So to stick with OLED, we can mimic what smartphone manufacturers do by literally gluing a touchscreen layer on top.
18
As you can imagine, these aren't easy to come by at this scale.
19
But Aaron's team has managed to arrange for one to be especially manufactured to exactly the right dimensions.
20
Testing it out reveals the first challenge though.
21
The touch layer doesn't work when it's in direct contact with the TV's glass surface.
22
There is simply too much interference introduced by the OLED array beneath it.
23
This isn't too surprising considering that the capacitive touch foil isn't intended to be mounted directly to a display like this, but after some experimentation I've found
24
that a quick workaround is to first lay down a sheet
25
of acrylic to separate the touch foil from the TV's front surface, creating a sort of buffer that allows the touch foil to operate normally.
26
As you can see, though, these extra layers on top make the screen appear dirty and washed out, which completely negates the benefits of the OLED panel.
27
The cause of this can actually be observed on a small
28
scale by holding a transparent plastic sheet against a piece of black vinyl, where it's given a grey appearance because of the air gap between them.
29
This is why high quality touch displays, including your smartphone, are often laminated with optically clear glue,
30
as the glue bonds the two layers together and changes how light passes through them, preserving contrast and clarity.
31
This glue is usually referred to as loka glue, or liquid optically clear adhesive.
32
It only sets when exposed to UV light, where it will cure in a few seconds to form a flexible silicon-like bond.
33
Very cool.
34
After peeling the protective films off both the acrylic and the TV, this glue can now be applied directly on the TV's front surface.
35
And lowering the acrylic onto it with the help of my dad, we can start to see the contrast immediately returning to the layer, which is hugely satisfying.
36
But it's also apparent that one vial of glue is nowhere near enough to spread to the edges.
37
What a mistake.
38
The only solution is to inject more glue underneath the acrylic with some tubing, which works, but it results in a huge amount of bubbles that need to be rolled out.
39
And as the glue is quite gloopy, it takes a while.
40
Still, after a lot of effort, it's starting to look pretty good.
41
Oh my goodness, it's finally done.
42
That took forever.
43
That was like literally two solid days of work.
44
But at least it's done now and after curing it by progressively moving the UV lights across it, it's time to glue on the touch layer.
45
Learning from my mistakes, I've this time emptied several vials of glue into a jug
46
so that they can all be dumped onto the display in one go, and it's really paid off as it reaches the perimeter without too much effort.
47
We're not out of the woods yet though.
48
This touch layer is very fragile, so cannot be the front surface that people interact with when they use the final phone.
49
So guess what that means?
50
Another acrylic layer, of course.
51
In addition to featuring a special hard coating to protect it from scratches, this final sheet is much larger as it also features a
52
painted-on bezel to cover the outer edges of the touchfoil to keep things visually neat.
53
It unfortunately still takes ages to squeeze out all of the bubbles despite the better application technique, but once it is clear, it can, just like every layer,
54
be cured with the UV lights.
55
This means that the last protective film can be peeled away so that we can finally inspect the surface quality.
56
And there are problems.
57
Big problems.
58
For the most part, the screen is clear, but there are patches around the perimeter where the glue has ended up being too thin and so has delaminated,
59
resulting in air pockets.
60
And what's worse, upon powering on the TV, there are visible lines across it, with some pixel rows behaving abnormally.
61
In a bit of a panic we flipped the TV over to see if there was anything obvious going wrong, and sure enough some of the glue has dissolved a seal around the display's outer perimeter
62
and entered the chamber under the OLED layer, drenching the most delicate part of the display's PCBs.
63
Despite my best efforts to clean it off, there's just too much of the PCBs that are inaccessible behind the display's structure.
64
So the display and all the effort we've put into it is toast.
65
So as you can imagine, this is a horrendous disaster to have happened and it's incredibly disheartening.
66
However, I'm not going to give up and after consulting with Aaron, we've decided to have another go.
67
And this means having another brand new TV and brand new acrylic layers.
68
Ouch.
69
This time around I'm taking no chances.
70
The tiny hairline gap around the TV's front glass, where the glue entered through last time and dissolved the seal, is to be filled with a low-modulus,
71
high-adhesion silicon to prevent the glue from entering the TV again.
72
And I've also brought in my friend Lamar to help with the gluing process and provide advice about UV glue best practices, as he knows a lot about it.
73
The pouring pattern, for example, needs to be optimised for the TV's aspect ratio, which helps it spread out more evenly to avoid being thin at the perimeter.
74
As you can see, this time around the application of the first acrylic layer goes really well,
75
and thanks to having made a dramatic increase to the quantity of glue used,
76
the bubbles are extremely easy to push to the edges for a really good quality finish.
77
And after curing it with the UV lights, it's straight on with the touch layer.
78
One major change we're making here is to have its manufacturer, ProDisplay, pre-apply a brand new one onto our front acrylic layer, which we took over to them.
79
Having them apply it means that they can use the proper intended application procedure for these touch foils.
80
And for us, it eliminates an entire gluing session and ensures that it's tightly applied with no ripples or undulations.
81
And they've done a fantastic job.
82
While this new touch layer slash front acrylic combo also appears to be going on smoothly, it's still incredibly stressful and tiring to squeeze out all of the bubbles knowing
83
that just one wrong move or too much pressure could throw the entire project back into jeopardy.
84
Still, eventually we get all of the bubbles out and begin the final curing process.
85
Due to the acrylic's special hard coat layer, it actually blocks most of the UV light, so So this time we've decided to mount the UV lights much further away
86
and have them curing for a much longer period of time.
87
This keeps the surface temperature lower which is better for the glue
88
and ensures that there are no mist areas as the light is more spread out.
89
So now it's the moment of truth.
90
Have all our efforts paid off?
91
Whoa!
92
Look at that!
93
This is an almost factory level finish quality.
94
No bubbles, no delamination, not even a speck of dust.
95
The glue has adhered all of the different layers together beautifully and has made them optically unified, which looks incredible.
96
But after all this, does the TV still work?
97
Well, moments before peeling off the protective film, I did test it out.
98
As you can see, the TV has survived this second attempt unscathed.
99
However, I have not tried the touch layer yet.
100
So, it's the moment of truth.
101
Is this going to work?
102
Oh yes!
103
Oh yes!
104
Look at that!
105
Oh yeah!
106
Oh wow!
107
you can I cannot describe to you how satisfying this is
108
to see a completely flawless OLED touchscreen that's 88 inches
109
and 8k so I would say this is probably pretty unique in the entire world
110
so it's going to certainly make the project stand out.
111
However as you can see we presently don't have a bezel
112
because we had to avoid using paint this time as the
113
touch layer needed the acrylic surface to be cleaned before application so we're going to do it with a different technique.
114
This technique requires the application of a full sheet of black
115
vinyl wrap to the entire display with the intention being to
116
use a custom made jig to score a line at a consistent distance in from the outer perimeter.
117
This allows the central section of the vinyl to be completely removed, leaving behind an absolutely perfect bezel that finishes off the display beautifully.
118
Ignoring the protective film that will take off the bezel later, the gravity of what we've achieved really sets in here.
119
This is a massive 88 inch top-of-the-line OLED TV that's been DIY'd to be a real capacitive touchscreen.
120
And on top of all that, it really does look like a giant replacement iPhone panel.
121
Just wild.
122
Well, it has taken literally weeks to get to this stage,
123
and boy, am I relieved because the whole project was hinging on this display being able to be made, basically.
124
And now Now that we have made it and it's successful and it's so flawless, which is amazing to be honest,
125
it's time to build the frame that will not only support the display, but also all of the aesthetic elements that will make it look like an iPhone.
126
Now it's pretty much inevitable that the final phone is going to be extremely heavy, so I need to do everything that I can to make it as light as possible.
127
So for the frame, I'm using a combination of aluminium trusses and sheeting.
128
However, as there are so many components that need to be fitted inside, I need to first make a digital model so
129
that I don't miss out the mounting holes for even just a single part.
130
And yes, this has been made in SketchUp.
131
You know, I'm a pro, using pro software.
132
Yeah.
133
Anyway, as you can imagine, there are about a billion of these openings and mounting holes, so it takes rather a long time to cut it all out, especially as it needs to be millimeter perfect.
134
But, so long as I've done a precise enough job, it should save time in the long run.
135
One thing to note is
136
that these large box section trusses are not only required around the outer perimeter but also in the centre,
137
as all of the phone's weight will be focused on this area alone.
138
This is because the phone's entire weight will be resting on this single point,
139
as the plan is to have it able to be rotated on some sort of stand.
140
It's a big challenge in and of itself, so we'll see how I get on with that.
141
But for now, I have a really rigid frame that will not only support the TV,
142
but also provide plenty of space for all of the components that have to be fitted inside, starting with the TV's own PCBs.
143
These handle both the video signal processing and power delivery, and with this particular TV, there are a ton of them.
144
I've honestly never seen a power supply require so much PCB area, and there's only just enough room for it all to squeeze in.
145
Here you can see why my cutting plan was absolutely essential, as there are so many different wires and ribbon cables that need to be routed to specific locations.
146
As these boards generate some amount of heat as well, it's necessary to install some fans to circulate the air and keep them cool.
147
These boards being added will allow the TV to operate as normal, and it won't even know that it's in a different chassis.
148
However, we'll still need to drive a display signal to them to make the TV operate like a smartphone.
149
And the problem is that iOS, the operating system that makes an iPhone an iPhone, is extremely locked down.
150
And there's presently no way of using it with an external touchscreen display without resorting to emulation.
151
This means that I'm going to have to get creative and do perhaps ironically the most un-Apple thing ever.
152
Use their competitor, Android.
153
You see, there's a custom branch of Android called Bliss OS that can be installed on normal PC hardware,
154
and it provides full compatibility with plug-in touchscreen interfaces like the one we've installed.
155
It can be a bit tricky to run on the latest hardware, however, with help from Lamar, we've managed to find a golden selection of components
156
that work perfectly with it and provide massive performance gains over a typical smartphone by several orders of magnitude.
157
After consolidating all of these parts together to keep them neat, it can be dropped inside the frame and hooked up to the TV's input.
158
This PC hardware takes up an entire section due to its size, but the top area remains free for another key aspect of the build, the camera system.
159
Apple puts great emphasis on the cameras they use in their phones, with more than one included for the best image quality at different focal lengths lengths.
160
A stunning job in miniaturization to be sure, but you still can't beat a full-frame camera for light gathering ability.
161
The one Aaron and I have decided on here is a Canon R5, which is a 45 megapixel full-frame beast,
162
and with a 28mm lens it should do a great job as the main camera.
163
As it's going to be sealed inside the frame though, how on earth is it going to be used to take photographs?
164
Well, it's actually got full wireless capabilities,
165
which means that it can be connected to from the Android environment for full remote control and delivery of images.
166
Not bad.
167
So that's the main camera sorted, but what about something for the telephoto shots?
168
Well, this is where a second camera can come into play.
169
This one is an RX10 Mark IV and it has the ability to zoom to the equivalent of 600mm.
170
This is extreme telephoto and is quite a bit more than what you'd expect from a normal iPhone.
171
At this zoom level though, its lens is really long, so how on earth are we going to fit it into the phone chassis?
172
Well, we can actually copy what smartphones do by installing a mirror at 45 degrees.
173
This basically bounces all the light towards the camera so that it gets a view out through its respective camera ring.
174
It's even motorized so that its view of the world can be moved up and down.
175
It's quite an important feature for actually aiming it at things, considering that the final phone won't be very manoeuvrable.
176
So, things are really starting to come together, but there's still one more component to add to this area.
177
The flashlight.
178
Now as pretty much every aspect of this build is being pushed to the maximum, I think we need to do the same for the flashlight.
179
So I'm going to use one of these.
180
Despite appearing tiny, this LED is actually a 400 watt studio grade lighting unit that can deliver a colossal amount of light.
181
So much so that it's necessary to use a special water cooling system to keep it cool.
182
Oh god, I forgot how bright these things were.
183
Yikes.
184
Now, as you can see, its light output is very broad and not at all focused.
185
So the addition of a lens really helps here, with the light now being thrown far further and appearing much brighter.
186
Learning wise there's just about enough room for it next to the cameras, with its power supply squeezing in next to the display boards.
187
Lamar has even developed an app for brightness control within the operating system, with various relay based fail safes to protect the LED.
188
Things are really looking a bit tight inside here now, and it's about to get even more squashed because it's time to add a speaker system.
189
Now simply because of their size, normal smartphones have notoriously bad speaker systems, and you You certainly wouldn't want to have to rely on one for a party, for example.
190
However, the TV's original speakers don't even improve things that much.
191
Bigger is simply better when it comes to audio.
192
However, for obvious reasons, there's no way that I can fit speakers like this inside the casing.
193
So I'm going to have to get quite creative
194
and use various speaker techniques to maximize the utilization of the space that we have available.
195
The first technique I'm going to go with is by building a transmission line subwoofer array.
196
To make these, it's a case of joining a special pair of mini subwoofers up to specifically sized acrylic tubes of a calculated length.
197
These tubes delay the sound waves coming from the rear of
198
the drivers just enough to convert them into being additive rather than subtractive to the sound waves
199
that come from the front of the drivers.
200
This will allow them to recreate notes as low as 40 Hz, which is excellent given their size.
201
As for mid-tone sounds, they can be handled by mid-tone drivers in custom sealed boxes.
202
As you can see, I've added plenty of lining to the inside walls for an ultra-clean sound output,
203
and the boxes themselves are shaped to fit around the various components to maximise their internal volume,
204
with a small air motion transformer tweeter squeezing alongside them to add some sparkle to the high frequencies.
205
And they're all powered by two quad-channel amplifiers with 50 watts per channel.
206
This setup should result in a very big sound stage that will punch well above its weight.
207
If you're interested in building a pair of speakers that utilise these very same techniques, you can find a full video on the topic on the main channel, which includes full build plans as well.
208
They really are quite remarkable performers given their size.
209
So the internals are almost complete now, but there is an important element to still install – the side buttons.
210
Now on a smartphone the side buttons are really the only other thing you'll interact with besides pressing on the screen.
211
And because they need to be so massively scaled up, I want the act of pressing them to be an experience in and of itself.
212
And to do this, I'm going to be using some air pistons.
213
Bear with me here.
214
As the air inside them has to squeeze through a tiny hole when the cylinder is moved either in or out, they limit the speed at which each button can be pressed,
215
which should enhance the impression of scale and make them feel like they're moving in slow motion.
216
To rig these up I've used 3D printing to make a custom chassis for each button,
217
which can impact against some electrical contacts for a confirmation of each button press.
218
Now unsurprisingly, I don't think that a 3D printed look is really going to match the rest of the build,
219
so I've had machined some solid aluminium caps that can fit onto them.
220
As buttons go, these look remarkable, and they really do appear to be giant iPhone buttons.
221
And it gives an exciting peek into how cool the final aesthetics are going to look.
222
I designed these right at the start when I made my digital model, so there are already appropriately sized holds on the perimeter trusses for them to fit in too.
223
Hmm.. addictive.
224
I really like how these buttons have turned out.
225
They feel massive and they look exactly like iPhone buttons.
226
However, the perimeter definitely doesn't look like an iPhone, so let's fix that.
227
The eagle-eyed of you will have noticed earlier
228
that the CAD model features some rims that cap off the outer parts of this perimeter.
229
The intention with these is to have them milled out of solid aluminium, just like the buttons.
230
The company that's milled these has made a fantastic job of them, and finished them with a lovely brushed appearance.
231
I particularly like the corner pieces as they emphasize the shape of the phone and look great when they're screwed in place.
232
One difference compared to a real iPhone though is
233
that it's been necessary to add some large holes to both the top and bottom rims.
234
These are for allowing the sound from the speakers to emanate unobstructed, and to allow for adequate airflow to cool all of the high power hardware inside.
235
It's a bit like a big exhaust on a fast car, necessary only because it's just got so much internal power.
236
The side rims are much more accurate to a real iPhone though, with openings only for the buttons.
237
An interesting thing about these is that they've been specifically designed to be mounted magnetically to the trusses,
238
and the reasoning for this is to allow access to some threaded rivets for adding some optional heavy-duty handles,
239
as all of the components have added up to such a massive weight
240
that these handles are going to be required for transportation purposes, and for maneuvering the final phone onto its stand later.
241
Once it is in situ though, the handles can simply be removed
242
and all of their bolt holes covered up with the side panels for an ultra clean look.
243
Now, as this has been my first properly commissioned project, a huge challenge for me has been tracking time spent on each element of it,
244
keeping the receipts organized and counted for each part and also getting it prepared for the final invoice.
245
Thankfully, though, this video's sponsored ad is for Odoo, which is an all-in-one management software that helps you manage your whole business in one platform.
246
Juggling different types of software for business activities can be a mind boggling experience.
247
As I just mentioned, you've got hours to track accounting, website management, advertising.
248
The list goes on.
249
With Odoo, though, you can significantly improve your business workflow with a wide range of applications to simplify these day to day tasks.
250
Their website builder, for example, is a powerful tool for creating a website quickly, easily and efficiently.
251
And if it's your first application, you can use it for free for life with unlimited hosting and support.
252
And you can even get a free personalized domain for a year.
253
You can create your website in only four simple steps.
254
Define your goals, choose the color palette or insert your own logo, add pages and features and choose your theme.
255
It's highly intuitive.
256
Simply drag and drop blocks and begin customizing them, adding content like text, pictures and functionality like animations or typography.
257
You can organise the layout of your block how you want it with the grid.
258
And if you're short of inspiration, Odoo's got you covered with their built in AI feature.
259
So what are you waiting for begin simplifying your business workflow today using odoo by visiting the link in the description
260
so having mounted all of the components i can now be confident
261
that i've not missed any mounting holes
262
so it is at last time to bond it to the screen this is a permanent process
263
that that relies primarily on glue.
264
The glue we're using sticks insanely well to both the rear plastic of the TV
265
and the aluminium on the underside of our framework.
266
However, it will also be complemented by a few mechanical mounting points as well to make sure
267
that it will never ever come away.
268
As you can see, for the gluing process, most of the components had to be temporarily removed.
269
But now that the screen is in place, they could be refitted, this time carefully routing all of the wires
270
and making sure that all the screws are tightened with threadlock.
271
It really is quite an impressive amount of internal components
272
and it's worth taking a good look
273
because you're not going to see it again as it's time to add the last piece of the framework
274
that will finalise its strength and make the entire thing ultra rigid.
275
And this is of course the back panel.
276
As this back panel is screwed in place it converts the frame into a laminated structure, much eliminating any possibility of twisting or bending that can happen to it.
277
There are a lot of screws to be tightened up here, but each one is worth it for the strength it will add.
278
As you can see it looks cool in a sort of industrial way, but taking a close look you can see that it's actually peppered with more magnets.
279
This is because the intention is to use a final acrylic sheet to cover everything up,
280
and these magnets allow this sheet to be stealthily mounted in place without any screws being visible.
281
Although we'll leave the protective film on for now to peel off later.
282
As you can see, this back panel also includes a nice resin printed rim around the camera area, but this still leaves to be added all of the camera area's aesthetic trim.
283
This is super fun.
284
The camera rings themselves are again solid aluminium, although this time finished with bead blasting for a matte appearance.
285
They sit on top of some 3D printed parts to black out their insides and prevent internal reflections from affecting the cameras,
286
with some glass discs finishing them off nicely.
287
These all get held together by a massively thick sheet of acrylic with an additional grey backing sheet.
288
And this too looks absolutely wild, just like a real iPhone camera section, only massive.
289
Sticking with the magnetic theme, it also can be held in place with appropriately strong magnets for accessibility reasons and it really completes the look.
290
It kind of messes with you because it's a familiar item just on a massive scale.
291
What have we done Aaron?
292
What have we done?
293
Wow.
294
So with the project almost complete now there's one last thing to consider and that's how to make it usable.
295
It's simply too heavy for one or two
296
or even three people to move so the solution is to mount it to a stand.
297
Now as I alluded to earlier this is all going to
298
be from a single point as it needs to be able to be rotated
299
and this is where a car wheel hub is going to come in perfectly.
300
The weight capacity of this wheel hub far exceeds the final weight of the phone
301
and having already added a super strong mounting point for it within the central truss it can simply be bolted in place.
302
What its other side attaches to though needs to also be appropriately heavy-duty,
303
so I've made some mounting holes for it in a big aluminium box section that has six millimeter thick walls.
304
This box section can then in turn sit on top of a heavy-duty motorized TV stand, which allows us to give it a test fit.
305
Because of the weight of the thing, lifting it requires the efforts of several people.
306
Amazingly though, once it's bolted in place, the stand holds it beautifully.
307
One thing that you might be wondering though is how on earth is it going to be powered?
308
Well, I thought we'd have a bit of fun here, so I've designed the USB Pro Maximus,
309
or USB Pro Max for short featuring 2000 watts of power delivery it's really just a few 3d printed parts
310
that house a standard kettle cable
311
but it's pretty darn cool looking it even features some built-in magnets you know
312
because we haven't used enough of them already to keep it from falling out
313
when it's plugged into its accompanying socket on the bottom side
314
of the phone adjacent to this by the way is a
315
hidden power button where normally on an iphone there would be a screw so let's test it out
316
There's not enough room to have it in portrait mode in my studio unfortunately, but it does all work.
317
If you're wondering why it looks so much like iOS rather than Android, it's been beautifully skinned by Aaron's team, and it looks pretty convincing.
318
So, it's working.
319
This is incredibly satisfying and a huge relief to see it actually in action and that the TV and Touchlayer have survived.
320
But the biggest challenge perhaps left is actually to get this over to Aaron's place
321
but thankfully I've got a load of people to help me.
322
Even so it's still a massive struggle to get it into the van and we only just manage it.
323
This project really has stretched all of us to our limits in
324
so many different ways and it's wonderful for the end result to be so jaw-droppingly awesome.
325
A lot of effort, sure, but it's unique.
326
Are you sure you're coming up for a step?
327
Step.
328
Nice, lower it a little bit.
329
That's it.
330
Nice.
331
I can really see you slowly pulling it in.
332
Is it just going here?
333
Yep.
334
Okay.
335
Oh wow.
336
Despite being involved in the build process remotely, this is Aaron's first time seeing it in person.
337
Oh, it's time.
338
I'm wanting to do this the whole time.
339
Oh, that's amazing.
340
That is absolutely amazing.
341
It's like, forget fidget spinners.
342
This is it.
343
This is technically world's first unbagging of USB-C Pro Max.
344
Exactly.
345
Oh my god!
346
It's like a mace.
347
Line it up and... And that's it!
348
And the magnets hold it in place.
349
Wow!
350
Wow!
351
Wow!
352
Ta-da!
353
Oh my god!
354
It's so high!
355
That's amazing!
356
Oh my god!
357
This is crazy!
358
It makes absolutely no sense to play on this, but...
359
Wow!
360
The journey to get to this point has been a long one, with many highs and many lows.
361
But what Aaron and I had the vision for here may possibly be the world's largest replica smartphone,
362
something that Aaron may be able to make official with a world record.
363
So I hope you've enjoyed seeing the build process behind the world's largest iPhone.
364
Aaron's now going to be doing some crazy stuff with it.
365
It will go through the appropriate review process.
366
Exactly, yeah.
367
So other than that, if you want to see what he gets up to with it, check out his video, which I'll link to down below.
368
But other than that, I'm Matt.
369
I'm Aaron.
370
And we'll catch you in the next one.
371
Goodbye for now.
ดาวน์โหลดแอป
ทุกอย่างที่ต้องใช้เพื่อพูดได้คล่อง
AI ให้คะแนนการออกเสียงให้คะแนนทุกประโยค
ฝึก IPAเชี่ยวชาญทุกเสียง
คำศัพท์สร้างคลังคำของคุณ
เกมคำศัพท์เล่นไปเรียนไป
FOR YOU
วิดีโอแนะนำ
B22
108 ประโยค
We made YOUR Dream Phone
Daily ConversationWorking Adults
B21
243 ประโยค
World's Tallest Elephant Toothpaste Volcano
Daily ConversationWorking Adults
B21
45 ประโยค
Creating Iron Man suit. Full workflow by @AlexLab. Real life Iron Man exosuit with a box of scraps)
Daily ConversationWorking Adults
B25
285 ประโยค
I Built a Fake Home Theater…
Daily ConversationWorking Adults
B11
48 ประโยค
iPhone Liquid Detected 💧 #smartphone #brokenfix #tech #problemfix #cellphone #screenbreak #iphone
Daily ConversationWorking Adults
B21
335 ประโยค
I Started With $600... Now I Make $10B/Year
Business EnglishDaily ConversationWorking Adults
B21
245 ประโยค
New iPhone 18 Pro: Everything announced about the iPhone with the best camera and battery life ever
Daily ConversationWorking Adults
B21
126 ประโยค
2026 iPad mini - The BIGGEST Upgrade Yet!
Daily ConversationWorking Adults
B21
415 ประโยค
I Crushed Every Chip Into One Chip
Daily ConversationWorking Adults
B21
302 ประโยค
We Tore Apart Our Wrecked C8 ZR1… It’s Worse Than We Thought
Daily ConversationWorking Adults
B21
396 ประโยค
Training W/ Real Life Vampire (Anti-aging)
Daily ConversationWorking Adults
B21
102 ประโยค
Beach Gear That Will Blow Your Mind!
Daily ConversationWorking Adults
คำศัพท์และข้อสังเกตด้านการพูดสำหรับบทเรียนนี้
วิดีโอนี้มี 371 ประโยค และ 5349 คำ สำหรับฝึกพูดตาม ช่วงที่มีเสียงพูดยาว 31:57 ผู้พูดพูดด้วยความเร็วเป็นธรรมชาติ ประมาณ 167 คำต่อนาที ใกล้เคียงกับบทสนทนาในชีวิตประจำวัน มีเพียง 81% ของคำที่อยู่ใน 3,000 คำที่ใช้บ่อยที่สุดในภาษาอังกฤษ คำศัพท์จึงค่อนข้างยาก
คำศัพท์สำคัญในวิดีโอนี้
คำที่ควรเรียนรู้ 15 คำจากวิดีโอ พร้อมคำอ่านและความหมาย:
| คำศัพท์ | คำอ่าน | ความหมาย |
|---|---|---|
| glue คำนาม | /ɡlu/ | กาว |
| layer คำนาม | /ˈleɪ̯ɚ/ | ชั้น |
| sheet คำนาม | /ʃit/ | แผ่น |
| smartphone คำนาม | /ˈsmɑɹtfoʊn/ | สมาร์ตโฟน |
| bubble คำนาม | /ˈbʌbəl/ | ฟอง |
| aluminium คำนาม | /ˌæl.(j)uˈmɪn.i.əm/ | อะลูมิเนียม, อะลูมินัม |
| technique คำนาม | /tɛkˈniːk/ | เทคนิค, กลเม็ด |
| custom คำนาม | /ˈkʌstəm/ | แบบแผน, ธรรมเนียม |
| hardware คำนาม | /ˈhɑɹdˌwɛɹ/ | ฮาร์ดแวร์ |
| seal คำนาม | /siːl/ | ลัญจกร |
| squeeze คำกริยา | /skwiːz/ | บีบ |
| intention คำนาม | /ɪnˈtɛnʃn̩/ | ความตั้งใจ |
| lens คำนาม | /lɛnz/ | เลนส์, แว่น |
| satisfy คำกริยา | /ˈsætɪsfaɪ/ | ทำให้พอใจ |
| chassis คำนาม | /ˈt͡ʃæsi/ | แชสซี |
กริยาวลีที่คุณจะได้ยิน
| คำศัพท์ | ความหมาย |
|---|---|
| give up คำกริยา | ยอมแพ้ |
| leave behind คำกริยา | ลืม |
| lie down คำกริยา | นอน |
| take off คำกริยา | ถอด |
การออกเสียงที่ควรระวัง
ผู้พูดใช้รูปย่อและรูปลดเสียง 73 ครั้ง เช่น I'm, I've, we're ให้พูดแบบสั้นตามที่ได้ยิน
- เสียง “th”: thin /ˈθɪn/, thick /θɪk/, aesthetic /ɛsˈθɛ.tɪk/, beneath /bɪˈniːθ/, gather /ˈɡæðɚ/
- เสียง “sh” และ “zh”: sheet /ʃit/, intention /ɪnˈtɛnʃn̩/, contrast /kənˈt(ʃ)ɹæst/, wash /wɑʃ/, inspiration /ˌɪn.spɪˈɹeɪ.ʃən/
- คำยาว — ลงเสียงหนักให้ถูกพยางค์: perimeter /pɪˈɹɪm.ɪ.tə/, aluminium /ˌæl.(j)uˈmɪn.i.əm/, beautifully /ˈbju.tɪ.fə.li/, incredibly /ɪŋˈkɹɛdɪbli/, manufacturer /ˌmænjʊˈfæktʃəɹə/
วิธีฝึกกับวิดีโอนี้
- ฟังวิดีโอให้จบหนึ่งรอบโดยยังไม่ต้องพูด แล้วจดคำที่ยังไม่รู้จัก
- เริ่มที่ความเร็ว 0.75× พูดตามทีละประโยค แล้วกลับไปใช้ความเร็วปกติเมื่อเริ่มคล่อง
- อัดเสียงตัวเองแล้วเทียบกับต้นฉบับ โดยสังเกตคำอย่าง glue, layer, sheet เป็นพิเศษ
ไวยากรณ์ในวิดีโอนี้
โครงสร้างที่ผู้พูดใช้บ่อยที่สุด พร้อมคำพูดจริงจากวิดีโอ:
| โครงสร้าง | ในวิดีโอ |
|---|---|
| Present perfect have/has + กริยาช่อง 3 — เหตุการณ์ในอดีตที่ยังเกี่ยวข้องกับปัจจุบัน | has set · has managed · I've found |
| Passive voice be + กริยาช่อง 3 — เน้นสิ่งที่เกิดขึ้น ไม่ใช่ผู้กระทำ | be made · isn't intended · be observed |
| Relative clauses who / which + อนุประโยค — ข้อมูลเพิ่มเติมเกี่ยวกับคนหรือสิ่งของ | layer, which is · lower which is · flawless, which is |
เทคนิค Shadowing คืออะไร?
Shadowing เป็นเทคนิคการเรียนรู้ภาษาที่ได้รับการรับรองทางวิทยาศาสตร์ พัฒนาขึ้นสำหรับการฝึกนักแปลมืออาชีพ วิธีการนี้เรียบง่ายแต่ทรงพลัง: คุณฟังเสียงภาษาอังกฤษจากเจ้าของภาษาและพูดตามทันที — เหมือนเงาที่ตามผู้พูดด้วยช่วงเวลาห่าง 1-2 วินาที การวิจัยแสดงว่าเทคนิคนี้ปรับปรุงความแม่นยำในการออกเสียง ทำนองเสียง จังหวะ การเชื่อมเสียง การฟังเข้าใจ และความคล่องแคล่วในการพูดได้อย่างมีนัยสำคัญ