跟讀練習: 000 - STM32F1 Tutorial Introduction Video - 通過影片學習英語口語

選擇練習模式

每種模式都會開啟全屏練習室。

83 句

如果句子過短或過長，請點選 Edit 進行調整。

Hi everyone, welcome to the WiiW Electronics.

So this tutorial is about the programming the STM32F1 microcontroller

and this video is an introduction to the tools we will be using during the whole tutorial.

So this is more for beginners

or hobbyist who would like to get more knowledge about microcontroller in general and also especially the STM32F1 microcontroller series.

There will be some discussion about the ARM microprocessor but not something in depth.

Before continuing, one of the recommendation is to use a PC screen to

watch these videos as I will be taping directly in the IDE.

Two screens would be best so you would be watching one screen and testing by yourself and the other one.

So this also tutorial will be making all the code from scratch

and the C level language

that will be used will be in introduction to an intermediary level so it will not be hard to understand.

So during this series the tool

that will be used from a software perspective for the first thing

and the most important one we will be using the KL5.

Let me IDE is made by the ARM company themselves.

Most of the microcontrollers have a huge library with

microcontrollers having the ARM microprocessor so that's quite a good one

and also even you don't have the hardware there is a quite simulation option

that you can use so you can simulate how your microcontroller will be behaving to a certain extent.

We will be showing some simulation so we can understand the behavior before even uploading the code in our microcontroller.

I made a series for the Kale in a different tutorial where I showed how to create a project

and also how to open the debug mode

so feel free to take a look at it as for the next videos

I will skip this part just for saving time and focusing on the core topic of that video

Also the other software I'll be using is the STM32CubeMX which is STM software.

I will not use this software to generate code

but mostly to show because it has a good graphic explanation for each microcontroller

and it helps to get quickly the information of the data for the microcontroller.

This is for the softwares I may use other one

but it will be quite introduced for different videos okay

and now for the hardware for the hardware I'll be using this blue board aka blue pill

so this blue board have the microcontroller the STM F103 C3

microcontroller one board would cost around two to three boxes I bought three four five boxes

and they can not soldered with the pin

so I soldered in a different way

and to program these microcontrollers there is this ST

and link V2 careful they are not genuine programmer

but they can work if it happens to you

that you buy the pink one just I would like to give you a short warning I took a picture

so I can give you what would be the issue

so as you can see here this is the USB picture showing

that the pin number 2 is the clock

and the pin number 4 is a DIO however

if you open the PCP you will see

that pin number two is the deio

and the pin number four is the clock one so be careful

when you do the wiring the pcb is the correct one

and if you do according to what the usb is showing you would may have an issue

and you will not be able to program your microcontroller okay good this is said

so this is about the hardware that will be used for the document

that I will be using and this document will be used just to explain to you

and to show you how to to program even a different microcontroller the first one will be the datasheet

So the datasheet for the one who are introduced are a summary of the microcontroller.

So as I told you I'm using the STM32F103 series

and it shows here the main features that we will be using in our programming videos.

The first one is a microcontroller that can go to 72 MHz of maximum frequency which is pretty good.

We will see what kind of speed we will go with that.

It has also 64 KB of memory, so this is the flash memory for the program, and 20 KB of SRAM.

It's a 3 .6 volt microcontroller but that should be fine for our application.

It has also an analog to digital converter.

We will have a video about it.

A DMA also.

The microcontroller we will be using have 48 pins, not 80, but it has 16 interrupt factors

which is quite great to use a lot of applications to have real -time system.

One of the great things too, it's a 5 volt tolerant.

So if it happens we use a different connection connection that have 5 volts we are not risking to destroying our microcontroller.

Yeah and also it has a debug mode.

We will be using a lot the CAIL to debug

and to see how our program is interacting which is really great for beginners to understand where the issue is.

There is timers and each timer have four channels will can be programmed in different way

and for the communication interfaces we will take a look to the I2C, the UART and the SPI.

So that's a general picture.

I quite advise you to take a look to this document it's quite short one only 117 pages

and the final document that we will be using will be the reference

Street this one and this document have 1133 page it's quite impressive

but this is the kind of like the guy

that you hate from the first sight

and with time it becomes your best friend

so we will use this document to a lot to do the programming

it has almost all the answers quite a good one

so let's see how we will how we finish it okay

so thank you a lot for this video and see you for the next one thanks

下載應用

流利口語所需的一切

AI 發音評分逐句打分

音標練習掌握每個音

詞彙學習建立你的詞庫

詞彙遊戲邊玩邊學

掃碼

Download on theApp Store Get it onGoogle Play

FOR YOU

本課的詞彙與口語要點

這節口語課以影片“000 - STM32F1 Tutorial Introduction Video”為素材。影片中反覆出現的詞有：microcontroller, Stm, pin, document, software。這段影片共有 83 個句子、1035 個單詞可供跟讀。講話部分時長為 7:42。說話人語速平穩，每分鐘約 134 個詞，很適合跟讀。 83% 的單詞屬於英語最常用的 3,000 詞，其餘的詞建議在練習前先學一下。

影片中的重點詞彙

影片中 15 個值得學習的單詞，附發音和釋義：

單詞	發音	釋義
hardware 名詞	/ˈhɑɹdˌwɛɹ/	硬體, 硬體 /硬體
tutorial 名詞	/ˌtjuːˈtɔːɹɪəl/	輔導 /輔導, 教程
introduce 動詞	/ˌɪntɹəˈdus/	介紹 /介紹, 紹介 /紹介
simulation 名詞	/ˌsɪm.jəˈleɪ.ʃn̩/	模擬 /模擬
timer 名詞	/ˈtaɪmɚ/	定時器 /定時器, 計時器 /計時器
beginner 名詞	/bəˈɡɪnɚ/	初學者 /初學者, 新手
topic 名詞	/ˈtɑpɪk/	主題 /主題, 話題 /話題
extent 名詞	/ɪkˈstɛnt/	範圍 /範圍
impressive 形容詞	/ɪmˈpɹɛsɪv/	令人印象深刻
flash 動詞	/flæʃ/	閃光 /閃光
explanation 名詞	/ˌɛkspləˈneɪʃən/	解釋 /解釋, 說明 /說明
wire 名詞	/ˈwaɪɚ/	線 /線, 鐵絲 /鐵絲
genuine 形容詞	/ˈd͡ʒɛn.juˌɪn/	真正, 真誠 /真誠
summary 名詞	/ˈsʌm.ə.ɹi/	摘要
frequency 名詞	/ˈfɹiːkwənsi/	頻率 /頻率, 頻度 /頻度

影片中的語法

說話人最常用的結構，並附上影片中的原話：

結構	影片中的用法
被動語態 be + 過去分詞 — 強調發生了什麼，而不是誰做的	is made · is said · are introduced
定語從句 who / which + 從句 — 補充說明人或事物	one who are · frequency which is · interacting which is

需要注意的發音

說話人用了 4 次縮略和弱讀形式，例如 I'll, don't, I'm。請按聽到的簡短形式來說。

“sh” 和 “zh” 音: simulation /ˌsɪm.jəˈleɪ.ʃn̩/, flash /flæʃ/, explanation /ˌɛkspləˈneɪʃən/, recommendation /ˌɹɛkəmɛnˈdeɪʃən/
長單詞——注意重音位置: explanation /ˌɛkspləˈneɪʃən/, recommendation /ˌɹɛkəmɛnˈdeɪʃən/, microcontroller /ˈmaɪkɹoʊkənˌtɹoʊlɚ/, intermediary /ˌɪn(t)ɚˈmidiˌɛɹi/

中文母語者容易讀錯的音：

/v/ — 不要讀成 /w/，上齒輕觸下唇: impressive /ɪmˈpɹɛsɪv/, behave /bɪˈheɪv/, volt /vəʊlt/, converter /kənˈvɜɹtɜɹ/
詞尾子音 — 要讀清楚，後面不要加母音: clock /klɑk/, introduce /ˌɪntɹəˈdus/, topic /ˈtɑpɪk/, extent /ɪkˈstɛnt/, impressive /ɪmˈpɹɛsɪv/
/r/ 和 /l/ 的區別: tutorial /ˌtjuːˈtɔːɹɪəl/, tolerant /ˈtɑːləɹənt/, microcontroller /ˈmaɪkɹoʊkənˌtɹoʊlɚ/, solder /ˈsɒl.də(ɹ)/

如何用這段影片練習

先完整聽一遍影片，不要開口，記下不認識的單詞。
用正常速度逐句跟讀，每句重複到你的節奏與說話人一致為止。
錄下自己的聲音並與原聲對比，特別注意 hardware, tutorial, introduce 這類單詞。

什麼是跟讀法？

跟讀法 (Shadowing) 是一種有科學依據的語言學習技巧，最初開發用於專業口譯員的培訓，並由多語言者Alexander Arguelles博士普及。這個方法簡單而強大：您在聽英語母語原聲的同時立即大聲重複——就像是一個延遲1-2秒緊跟說話者的影子。與被動聽力或語法練習不同，跟讀法強迫您的大腦和口腔肌肉同時處理並模模擬實的講話模式。研究表明它能顯著提高發音準確性，語調，節奏，連讀，聽力理解和口語流利度——使其成為雅思口語備考和真實英語交流最有效的方法之一。

影子跟讀法: 閱讀完整分步指南 →

跟讀練習: 000 - STM32F1 Tutorial Introduction Video - 通過影片學習英語口語

選擇練習模式

下載應用

推薦影片

Python3 For Pentesting - Introduction

Making a 360° Controller Smaller than a Penny!

Physical design tutorial with Cadence Innovus [basic]

DeepSeek R1 Explained in 2 Minutes

you will never ask about pointers again after watching this video

Introduction to PLC | Siemens PLC Training Course

Best NextJS Folder Structures | Beginner - Intermediate - Advanced

Teaching Myself Electronics (Part One)

Engineer's tool list

Introduction

Embedded Systems Explained in 3 minutes

NEW- Micro Unit 1 Summary- Basic Economic Concepts