Shadowing-Übung: Step-by-step Demonstration: High-Voltage Battery Repair - Englisch Sprechen Lernen mit Video

Übungsmodus wählen

Jeder Modus öffnet einen Übungsraum im Vollbild.

57 Sätze
Wenn Sätze zu kurz oder zu lang sind, klicke auf Edit, um sie anzupassen.
1
We're here at Precision Auto Service in Langley, BC, where a customer has brought in a 2016 Fiat 500E for repair.
2
The car was towed all the way from Vernon, BC, over 400 kilometers away from the shop.
3
The customer reported that the car would not go into ready mode.
4
The dealership had told the customer
5
that the entire battery pack would have to be replaced at a cost of around $20 ,000, and that was if a replacement could be found.
6
Precision Auto's diagnosis revealed a fault within the battery pack control module.
7
Replacement BPCMs are not readily available either, but Precision Auto is well connected and was able to source one from a company in Europe.
8
After the replacement module arrived, it was time to perform the repair.
9
The first step is to disconnect the 12 volt battery.
10
Yes, most EVs have a 12 volt battery to run accessories like lights, wipers and infotainment systems.
11
Next, the high voltage service plug is removed.
12
On this model it is located under the rear seat.
13
The service plug is like a giant fuse, this one is 350 amps.
14
Once removed, the high voltage is isolated to the inside of the battery pack, making it safe to work on the vehicle.
15
The battery pack is removed from under the car, so the car is lifted with a hoist.
16
On the Fiat, the battery pack extends from just rear of the front wheels almost to the back of the car.
17
The rearward part is where the fuel tank would be on a gas -powered car.
18
Several metal protective covers are removed.
19
This exposes the main high voltage cables, which are colored orange, and the cooling system hoses.
20
This battery is liquid cooled.
21
Even though the high voltage battery has been isolated, the technician puts on rubber electrical safety gloves before proceeding with the next steps.
22
To ensure there are no pinholes, the gloves are tested before each use.
23
This is done by rolling up the open ends of the gloves, pressurizing the air inside.
24
Then the gloves are held to the cheek to check for air leaks.
25
Once the gloves have passed the test, a pair of work over gloves are worn over them.
26
Now the technician is ready to disconnect the electrical cables from the battery pack, starting with the main line and then the secondary line.
27
He places a catchment vessel on a scissor lift table directly beneath the coolant hoses,
28
clamps the hoses, and then loosens the clamps where the hoses connect to the fittings on the battery pack housing.
29
The coolant drains into the catchment vessel.
30
to prevent further spillage while the battery pack is being removed he places caps on the coolant fittings
31
because the battery pack goes over the top of the rear axle the complete rear axle and suspension is removed.
32
When the battery pack is removed, it is going to drastically change the weight distribution of the vehicle,
33
so the technician secures the front and rear of the vehicle with supports beforehand.
34
The technician places the scissor lift table beneath the battery and raises it until it contacts the bottom of the battery case.
35
Now the main bolts can be removed
36
With all the bolts removed, the table and battery pack are lowered together.
37
This vehicle had a considerable amount of mud caked on its underside, so the battery pack cover must be cleaned before it can be opened.
38
No debris should be allowed to contaminate the interior of the battery case.
39
The technician uses a shop vac and compressed air to remove loose mud and dust.
40
Several dozen bolts hold the top and bottom halves of the battery pack case together.
41
These are removed.
42
The top half of the case can now be lifted off, exposing the components of the battery
43
The technician conducts some tests, verifying voltage readings to ensure there are no other problems.
44
Satisfied with the results, he disconnects the cables from the connectors on the BPC -M and removes the module.
45
He then installs the replacement module.
46
The battery pack is now ready to be reinstalled in the vehicle.
47
When an electric vehicle's high voltage battery malfunctions, it does not always mean that the entire battery pack must be replaced.
48
The most common reason a complete replacement will be recommended is
49
because currently there are very few businesses that possess the resources necessary to perform battery pack diagnosis and repair.
50
It is much easier to simply swap out the entire battery pack
51
that said the price of a replacement battery pack is usually prohibitive
52
and in many cases availability is scarce this will change over
53
time as with any new consumer product prices will come down as demand
54
and production increase this will be true not only for complete battery packs
55
but also for the internal components precision auto service is presently one of very few repair facilities
56
that have invested in the tools, equipment and training necessary to diagnose and repair high voltage batteries and other EV components.
57
This too will change as shops start to see a larger portion of their customer base driving electric vehicles.

App herunterladen

Alles, was du zum fließenden Sprechen brauchst

KI-AussprachebewertungJeder Satz bewertet
IPA-TrainingJeden Laut meistern
WortschatzBaue deinen Wortschatz auf
VokabelspielSpielend lernen

Wortschatz und Sprechhinweise zu dieser Lektion

Dieses Video enthält 57 Sätze und 852 Wörter zum Nachsprechen. Der gesprochene Teil dauert 8:46. Der Sprecher spricht langsam, etwa 97 Wörter pro Minute, sodass genug Zeit bleibt, jeden Laut nachzuahmen. Nur 77 % der Wörter gehören zu den 3.000 häufigsten im Englischen, der Wortschatz ist also anspruchsvoll.

Wichtiger Wortschatz in diesem Video

15 lernenswerte Wörter aus dem Video, mit Aussprache und Bedeutung:

WortAusspracheBedeutung
voltage Substantiv/ˈvəʊltɪd͡ʒ/Spannung
replacement Substantiv/ɹɪˈpleɪsmənt/Ersatz, Ersatzspieler
glove Substantiv/ɡlʌv/Handschuh
technician Substantiv/tɛkˈnɪʃən/Techniker, Technikerin
repair Verb/ˈɹiːpɛɚ/reparieren
precision Substantiv/pɹɪˈsɪʒ.ən/Präzision, Genauigkeit
module Substantiv/ˈmɑd͡ʒul/Modul
hose Substantiv/hoʊz/Schlauch
component Substantiv/kəmˈpoʊ.nənt/Komponente
bolt Substantiv/boʊlt/Schraube, Bolzen
automobile Substantiv/ˈɔː.tə.məˌbil/Automobil, Auto
connect Verb/kəˈnɛkt/verbinden
vessel Substantiv/ˈvɛsəl/Schiff, Boot
beneath/bɪˈniːθ/unter
diagnosis Substantiv/daɪəɡˈnəʊsɪs/Diagnose

Phrasal Verbs, die du hören wirst

WortBedeutung
come down Verbherunterkommen
roll up Verbaufrollen, zusammenrollen

Grammatik in diesem Video

Die Strukturen, die der Sprecher am häufigsten verwendet, mit den genauen Worten aus dem Video:

StrukturIm Video
Passiv be + Partizip Perfekt – wichtig ist, was geschieht, nicht wer es tutwas towed · be replaced · is removed
Present Perfect have/has + Partizip Perfekt – eine vergangene Handlung, die jetzt noch wichtig isthas brought · has been isolated · have passed

Aussprache, auf die du achten solltest

  • Die Laute „sh“ und „zh“: technician /tɛkˈnɪʃən/, precision /pɹɪˈsɪʒ.ən/, suspension /səˈspɛnʃən/, dealership /ˈdiːləʃɪp/, malfunction /ˌmælˈfʌŋk.ʃən/
  • Lange Wörter – auf die Betonung achten: automobile /ˈɔː.tə.məˌbil/, electrical /ɪˈlɛktɹɪkəl/, considerable /kənˈsɪdəɹəbl̩/, availability /əˌveɪ.ləˈbɪl.ɪ.ti/, accessory /əkˈsɛs.(ə.)ɹi/

So übst du mit diesem Video

  1. Höre dir das ganze Video einmal an, ohne zu sprechen, und notiere die Wörter, die du nicht kennst.
  2. Sprich Satz für Satz in normaler Geschwindigkeit nach und wiederhole jeden, bis dein Rhythmus zum Sprecher passt.
  3. Nimm dich auf und vergleiche mit dem Original; achte dabei auf Wörter wie voltage, replacement, glove.

Was ist die Shadowing-Technik?

Shadowing ist eine wissenschaftlich fundierte Sprachlerntechnik, die ursprünglich für die professionelle Dolmetscherausbildung entwickelt und durch den Polyglotten Dr. Alexander Arguelles populär gemacht wurde. Die Methode ist einfach aber wirkungsvoll: Du hörst englisches Audio von Muttersprachlern und wiederholst es sofort laut — wie ein Schatten, der dem Sprecher mit nur 1–2 Sekunden Verzögerung folgt. Anders als passives Hören oder Grammatikübungen zwingt Shadowing dein Gehirn und deine Mundmuskulatur, gleichzeitig echte Sprachmuster zu verarbeiten und zu reproduzieren. Studien zeigen, dass es Aussprachegenauigkeit, Intonation, Rhythmus, verbundene Sprache, Hörverständnis und Sprechflüssigkeit signifikant verbessert — was es zu einer der effektivsten Methoden für die IELTS Speaking-Vorbereitung und reale englische Kommunikation macht.

Shadowing-Technik: die vollständige Schritt-für-Schritt-Anleitung lesen →