ฝึกพูดภาษาอังกฤษด้วยเทคนิค Shadowing จากวิดีโอ: Step-by-step Demonstration: High-Voltage Battery Repair

กำลังสร้างบทเรียน...
1
We're here at Precision Auto Service in Langley, BC, where a customer has brought in a 2016 Fiat 500E for repair.
2
The car was towed all the way from Vernon, BC, over 400 kilometers away from the shop.
3
The customer reported that the car would not go into ready mode.
4
The dealership had told the customer
5
that the entire battery pack would have to be replaced at a cost of around $20 ,000, and that was if a replacement could be found.
6
Precision Auto's diagnosis revealed a fault within the battery pack control module.
7
Replacement BPCMs are not readily available either, but Precision Auto is well connected and was able to source one from a company in Europe.
8
After the replacement module arrived, it was time to perform the repair.
9
The first step is to disconnect the 12 volt battery.
10
Yes, most EVs have a 12 volt battery to run accessories like lights, wipers and infotainment systems.
11
Next, the high voltage service plug is removed.
12
On this model it is located under the rear seat.
13
The service plug is like a giant fuse, this one is 350 amps.
14
Once removed, the high voltage is isolated to the inside of the battery pack, making it safe to work on the vehicle.
15
The battery pack is removed from under the car, so the car is lifted with a hoist.
16
On the Fiat, the battery pack extends from just rear of the front wheels almost to the back of the car.
17
The rearward part is where the fuel tank would be on a gas -powered car.
18
Several metal protective covers are removed.
19
This exposes the main high voltage cables, which are colored orange, and the cooling system hoses.
20
This battery is liquid cooled.
21
Even though the high voltage battery has been isolated, the technician puts on rubber electrical safety gloves before proceeding with the next steps.
22
To ensure there are no pinholes, the gloves are tested before each use.
23
This is done by rolling up the open ends of the gloves, pressurizing the air inside.
24
Then the gloves are held to the cheek to check for air leaks.
25
Once the gloves have passed the test, a pair of work over gloves are worn over them.
26
Now the technician is ready to disconnect the electrical cables from the battery pack, starting with the main line and then the secondary line.
27
He places a catchment vessel on a scissor lift table directly beneath the coolant hoses,
28
clamps the hoses, and then loosens the clamps where the hoses connect to the fittings on the battery pack housing.
29
The coolant drains into the catchment vessel.
30
to prevent further spillage while the battery pack is being removed he places caps on the coolant fittings
31
because the battery pack goes over the top of the rear axle the complete rear axle and suspension is removed.
32
When the battery pack is removed, it is going to drastically change the weight distribution of the vehicle,
33
so the technician secures the front and rear of the vehicle with supports beforehand.
34
The technician places the scissor lift table beneath the battery and raises it until it contacts the bottom of the battery case.
35
Now the main bolts can be removed
36
With all the bolts removed, the table and battery pack are lowered together.
37
This vehicle had a considerable amount of mud caked on its underside, so the battery pack cover must be cleaned before it can be opened.
38
No debris should be allowed to contaminate the interior of the battery case.
39
The technician uses a shop vac and compressed air to remove loose mud and dust.
40
Several dozen bolts hold the top and bottom halves of the battery pack case together.
41
These are removed.
42
The top half of the case can now be lifted off, exposing the components of the battery
43
The technician conducts some tests, verifying voltage readings to ensure there are no other problems.
44
Satisfied with the results, he disconnects the cables from the connectors on the BPC -M and removes the module.
45
He then installs the replacement module.
46
The battery pack is now ready to be reinstalled in the vehicle.
47
When an electric vehicle's high voltage battery malfunctions, it does not always mean that the entire battery pack must be replaced.
48
The most common reason a complete replacement will be recommended is
49
because currently there are very few businesses that possess the resources necessary to perform battery pack diagnosis and repair.
50
It is much easier to simply swap out the entire battery pack
51
that said the price of a replacement battery pack is usually prohibitive
52
and in many cases availability is scarce this will change over
53
time as with any new consumer product prices will come down as demand
54
and production increase this will be true not only for complete battery packs
55
but also for the internal components precision auto service is presently one of very few repair facilities
56
that have invested in the tools, equipment and training necessary to diagnose and repair high voltage batteries and other EV components.
57
This too will change as shops start to see a larger portion of their customer base driving electric vehicles.

คำศัพท์และข้อสังเกตด้านการพูดสำหรับบทเรียนนี้

วิดีโอนี้มี 57 ประโยค และ 852 คำ สำหรับฝึกพูดตาม ช่วงที่มีเสียงพูดยาว 8:46 ผู้พูดพูดช้า ประมาณ 97 คำต่อนาที จึงมีเวลาเลียนแบบทุกเสียง มีเพียง 77% ของคำที่อยู่ใน 3,000 คำที่ใช้บ่อยที่สุดในภาษาอังกฤษ คำศัพท์จึงค่อนข้างยาก

คำศัพท์สำคัญในวิดีโอนี้

คำที่ควรเรียนรู้ 15 คำจากวิดีโอ พร้อมคำอ่านและความหมาย:

คำศัพท์คำอ่านความหมาย
voltage คำนาม/ˈvəʊltɪd͡ʒ/แรงดันไฟฟ้า, โวลเตจ
glove คำนาม/ɡlʌv/ถุงมือ
technician คำนาม/tɛkˈnɪʃən/ช่างเทคนิค
repair คำกริยา/ˈɹiːpɛɚ/ซ่อม, ซ่อมแซม
module คำนาม/ˈmɑd͡ʒul/มอดูล, โมดูล
hose คำนาม/hoʊz/ท่อยาง, ท่อ
bolt คำนาม/boʊlt/สลัก, กลอน
automobile คำนาม/ˈɔː.tə.məˌbil/รถยนต์, รถ
connect คำกริยา/kəˈnɛkt/เชื่อม, ต่อ
vessel คำนาม/ˈvɛsəl/เรือ
diagnosis คำนาม/daɪəɡˈnəʊsɪs/การวินิจฉัย
plug คำนาม/plʌɡ/ปลั๊ก, เต้าเสียบ
expose คำกริยา/ɪkˈspoʊz/เผย, เปิดเผย
reveal คำกริยา/ɹɪˈviːl/เปิดเผย
dust คำนาม/dʌst/ฝุ่น, ผง

ไวยากรณ์ในวิดีโอนี้

โครงสร้างที่ผู้พูดใช้บ่อยที่สุด พร้อมคำพูดจริงจากวิดีโอ:

โครงสร้างในวิดีโอ
Passive voice be + กริยาช่อง 3 — เน้นสิ่งที่เกิดขึ้น ไม่ใช่ผู้กระทำwas towed · be replaced · is removed
Present perfect have/has + กริยาช่อง 3 — เหตุการณ์ในอดีตที่ยังเกี่ยวข้องกับปัจจุบันhas brought · has been isolated · have passed

การออกเสียงที่ควรระวัง

  • เสียง “sh” และ “zh”: technician /tɛkˈnɪʃən/, precision /pɹɪˈsɪʒ.ən/, suspension /səˈspɛnʃən/, dealership /ˈdiːləʃɪp/, malfunction /ˌmælˈfʌŋk.ʃən/
  • คำยาว — ลงเสียงหนักให้ถูกพยางค์: automobile /ˈɔː.tə.məˌbil/, electrical /ɪˈlɛktɹɪkəl/, considerable /kənˈsɪdəɹəbl̩/, availability /əˌveɪ.ləˈbɪl.ɪ.ti/, accessory /əkˈsɛs.(ə.)ɹi/

วิธีฝึกกับวิดีโอนี้

  1. ฟังวิดีโอให้จบหนึ่งรอบโดยยังไม่ต้องพูด แล้วจดคำที่ยังไม่รู้จัก
  2. พูดตามทีละประโยคด้วยความเร็วปกติ ทำซ้ำแต่ละประโยคจนจังหวะของคุณตรงกับผู้พูด
  3. อัดเสียงตัวเองแล้วเทียบกับต้นฉบับ โดยสังเกตคำอย่าง voltage, glove, technician เป็นพิเศษ

เทคนิค Shadowing คืออะไร?

Shadowing เป็นเทคนิคการเรียนรู้ภาษาที่ได้รับการรับรองทางวิทยาศาสตร์ พัฒนาขึ้นสำหรับการฝึกนักแปลมืออาชีพ วิธีการนี้เรียบง่ายแต่ทรงพลัง: คุณฟังเสียงภาษาอังกฤษจากเจ้าของภาษาและพูดตามทันที — เหมือนเงาที่ตามผู้พูดด้วยช่วงเวลาห่าง 1-2 วินาที การวิจัยแสดงว่าเทคนิคนี้ปรับปรุงความแม่นยำในการออกเสียง ทำนองเสียง จังหวะ การเชื่อมเสียง การฟังเข้าใจ และความคล่องแคล่วในการพูดได้อย่างมีนัยสำคัญ

เทคนิค shadowing: อ่านคู่มือฉบับเต็มทีละขั้นตอน →