Shadowing Practice: How Does Electricity Flow Through a Utility-Scale Solar Site? - Learn English Speaking with Video

Ders oluşturuluyor...
1
I wanted to take the time to make sure you all totally understood the concept of electrical flow through the PV plant.
2
The following slides show one specific setup in regards to power conversion and electrical flow.
3
So, firstly, sunlight strikes the PV modules.
4
The sunlight is converted into electricity within the PV module.
5
And as we know from previous slides, the electricity that's generated is DC electricity, direct current.
6
Modules are wired together in strings.
7
Remember that a string is just the technical name for a group of modules all wired together in series.
8
This string of PV modules is basically collecting all the electrical current.
9
And all of this collected up electricity is then transported via
10
a home run of DC cabling to a combiner box as shown.
11
So you now have the electricity from multiple strings all feeding into a single combiner box, where additional electrical protection such as fuses will be located.
12
The combiner box is pretty much doing exactly what it says, combining or consolidating all this electricity.
13
There's a few obvious benefits here.
14
The DC feeders are higher gauge cables, so they'll have reduced electrical losses.
15
And since each of them can carry more current, there's simply less of them, which makes for easier management and less terminations once we get to the inverter stage.
16
The DC electricity then needs to be transported from the combiner box to the next key component in line, the inverters, shown here.
17
This is achieved using what are commonly known as DC feeders.
18
There's a number of ways to do this, either an underground trenching or above ground cable trays.
19
Once the DC electricity has been transferred to the inverter, the inverter does its job, which is to convert this DC electricity into AC electricity.
20
Remember that the key reason we need to do this is
21
that the electricity on the utility grid is all high voltage AC and we have to match that.
22
So now we have AC electricity which has been produced by the inverters
23
and we need to transport this electricity to the next step in the chain which is the transformer.
24
Now we're at the transformer level, and the transformer's job is to step the voltage of the AC electricity up.
25
The reason for this is that as we should remember back from our power and voltage slides much earlier in the presentation, and our discussion around Ohm's law,
26
resistance equals voltage divided by current.
27
Now remember that power can be calculated by multiplying voltage by current,
28
but Ohm's states that voltage can also be expressed by current multiplied by resistance.
29
This means that you can calculate power by squaring your current and multiplying it by the resistance.
30
Since the resistance of the cabling from the transformer to the interconnect won't change, as that's a function of the material that's being used,
31
to minimize the power losses in the system we want to minimize the current as much as possible.
32
The only way to do that, again going back the Ohm's law is to increase the voltage.
33
So step the voltage up, reduce the current required and reduce the power losses in the system.
34
We then need to transport this AC electricity from the location of the transformer out to the point of interconnect.
35
This is done via AC cabling and is commonly done via underground trenching.
36
The point of interconnect, or POI, is simply where the power plant ties into the utility grid.
37
Now, once you're at the point of interconnect, depending on the size of the plant or the transmission lines you're tying into,
38
there may be another transformer to step the voltage up again to match what's on the existing lines
39
so you can go from 34.5 kV up to 69 kV
40
or even higher
41
and there you have it you've then got high voltage ac electricity onto the utility lines
42
so what started as sunlight hitting an individual pv module
43
which created low voltage dc electricity has gone through all these various steps
44
and conversions through home runs combiner boxes dc feeders inverters transformers ac cabling
45
and is then connected into the utility lines as high voltage ac

Bu dersin kelimeleri ve konuşma notları

Bu videoda gölgeleme çalışması için 45 cümle ve 696 kelime var. Konuşma bölümü 4:08 sürüyor. Konuşmacı dakikada yaklaşık 169 kelimeyle, günlük konuşmaya yakın doğal bir hızda konuşuyor. Kelimelerin yalnızca %77’i İngilizcede en sık kullanılan 3.000 kelime arasında, bu yüzden kelime dağarcığı zorlayıcı.

Bu videodaki önemli kelimeler

Videodan öğrenmeye değer 15 kelime, telaffuzu ve anlamıyla:

KelimeTelaffuzAnlam
voltage isim/ˈvəʊltɪd͡ʒ/gerilim
module isim/ˈmɑd͡ʒul/modül
string isim/stɹɪŋ/ip, tel
slide isim/ˈslaɪ̯d/kaydırak
sunlight isim/ˈsʌnˌlaɪt/güneş ışığı
wire isim/ˈwaɪɚ/tel
commonly zarf/ˈkɑmənli/sık sık, sıkça
collect fiil/ˈkɑlɪkt/katılmak, toplamak
underground sıfat/ˌʌn.dəɹˈɡɹaʊnd/yer altı, underground
conversion isim/kənˈvɝʒən/çevirim, dönüşüm
grid isim/ɡɹɪd/şebeke
convert fiil/kənˈvɝt/dönüştürmek
calculate fiil/ˈkælkjʊleɪt/hesaplamak
minimize fiil/ˈmɪn.ɪˌmaɪz/azaltmak, cüceleştirmek
trench isim/ˈtɹɛnt͡ʃ/hendek

Bu videodaki dil bilgisi

Konuşmacının en çok kullandığı yapılar, videodaki sözcüklerin aynısıyla:

YapıVideoda
Edilgen yapı be + fiilin üçüncü hâli — kimin yaptığı değil, ne olduğu önemliis converted · are wired · will be located
Present perfect have/has + fiilin üçüncü hâli — geçmişte olan ama şimdi de önemli olan bir eylemhave reduced · has been transferred · has been produced
İlgi cümlecikleri who / which + cümle — bir kişi ya da şey hakkında ek bilgithem, which makes · job, which is · electricity which has

Dikkat edilecek telaffuzlar

Konuşmacı you're, they'll, we're gibi kısaltılmış biçimleri 6 kez kullanıyor. Bunları duyduğunuz gibi kısa söyleyin.

  • “sh” ve “zh” sesleri: conversion /kənˈvɝʒən/, transmission /tɹænsˈmɪʃən/, presentation /ˌpɹɛzn̩ˈteɪʃn̩/, termination /tɚmɪˈneɪʃən/
  • Uzun kelimeler — vurguyu doğru yere koyun: electricity /ɪˌlɛkˈtɹɪsɪti/, electrical /ɪˈlɛktɹɪkəl/, utility /juːˈtɪlɪti/, termination /tɚmɪˈneɪʃən/, interconnect /ˌɪn.tə.kəˈnɛkt/

Bu videoyla nasıl çalışılır

  1. Videonun tamamını konuşmadan bir kez dinleyin ve bilmediğiniz kelimeleri not edin.
  2. 0,75× hızla başlayın, cümle cümle tekrar edin ve kolaylaşınca normal hıza dönün.
  3. Kendinizi kaydedin ve orijinaliyle karşılaştırın; voltage, module, string gibi kelimelere özellikle dikkat edin.

Gölgeleme Tekniği Nedir?

Gölgeleme, başlangıçta profesyonel tercüman eğitimi için geliştirilen ve çok dilli Dr. Alexander Arguelles tarafından popüler hale getirilen, bilim destekli bir dil öğrenme tekniğidir. Yöntem basit ama güçlüdür: ana dili İngilizce olan bir sesi dinler ve hemen yüksek sesle tekrar edersiniz — konuşmacıyı 1-2 saniye gecikmeyle takip eden bir gölge gibi. Pasif dinleme veya dilbilgisi alıştırmalarının aksine, gölgeleme beyninizi ve ağız kaslarınızı gerçek konuşma kalıplarını eşzamanlı olarak işlemeye ve yeniden üretmeye zorlar. Araştırmalar, telaffuz doğruluğu, tonlama, ritim, bağlı konuşma, dinleme anlama ve konuşma akıcılığını önemli ölçüde geliştirdiğini göstermektedir — bu da onu IELTS Konuşma hazırlığı ve gerçek dünya İngilizce iletişimi için en etkili yöntemlerden biri yapar.

Shadowing tekniği: adım adım eksiksiz rehberi okuyun →