シャドーイング練習: How Does Electricity Flow Through a Utility-Scale Solar Site? - 動画で英語スピーキングを学ぶ
レッスンを作成中...
1
I wanted to take the time to make sure you all totally understood the concept of electrical flow through the PV plant.
2
The following slides show one specific setup in regards to power conversion and electrical flow.
3
So, firstly, sunlight strikes the PV modules.
4
The sunlight is converted into electricity within the PV module.
5
And as we know from previous slides, the electricity that's generated is DC electricity, direct current.
6
Modules are wired together in strings.
7
Remember that a string is just the technical name for a group of modules all wired together in series.
8
This string of PV modules is basically collecting all the electrical current.
9
And all of this collected up electricity is then transported via
10
a home run of DC cabling to a combiner box as shown.
11
So you now have the electricity from multiple strings all feeding into a single combiner box, where additional electrical protection such as fuses will be located.
12
The combiner box is pretty much doing exactly what it says, combining or consolidating all this electricity.
13
There's a few obvious benefits here.
14
The DC feeders are higher gauge cables, so they'll have reduced electrical losses.
15
And since each of them can carry more current, there's simply less of them, which makes for easier management and less terminations once we get to the inverter stage.
16
The DC electricity then needs to be transported from the combiner box to the next key component in line, the inverters, shown here.
17
This is achieved using what are commonly known as DC feeders.
18
There's a number of ways to do this, either an underground trenching or above ground cable trays.
19
Once the DC electricity has been transferred to the inverter, the inverter does its job, which is to convert this DC electricity into AC electricity.
20
Remember that the key reason we need to do this is
21
that the electricity on the utility grid is all high voltage AC and we have to match that.
22
So now we have AC electricity which has been produced by the inverters
23
and we need to transport this electricity to the next step in the chain which is the transformer.
24
Now we're at the transformer level, and the transformer's job is to step the voltage of the AC electricity up.
25
The reason for this is that as we should remember back from our power and voltage slides much earlier in the presentation, and our discussion around Ohm's law,
26
resistance equals voltage divided by current.
27
Now remember that power can be calculated by multiplying voltage by current,
28
but Ohm's states that voltage can also be expressed by current multiplied by resistance.
29
This means that you can calculate power by squaring your current and multiplying it by the resistance.
30
Since the resistance of the cabling from the transformer to the interconnect won't change, as that's a function of the material that's being used,
31
to minimize the power losses in the system we want to minimize the current as much as possible.
32
The only way to do that, again going back the Ohm's law is to increase the voltage.
33
So step the voltage up, reduce the current required and reduce the power losses in the system.
34
We then need to transport this AC electricity from the location of the transformer out to the point of interconnect.
35
This is done via AC cabling and is commonly done via underground trenching.
36
The point of interconnect, or POI, is simply where the power plant ties into the utility grid.
37
Now, once you're at the point of interconnect, depending on the size of the plant or the transmission lines you're tying into,
38
there may be another transformer to step the voltage up again to match what's on the existing lines
39
so you can go from 34.5 kV up to 69 kV
40
or even higher
41
and there you have it you've then got high voltage ac electricity onto the utility lines
42
so what started as sunlight hitting an individual pv module
43
which created low voltage dc electricity has gone through all these various steps
44
and conversions through home runs combiner boxes dc feeders inverters transformers ac cabling
45
and is then connected into the utility lines as high voltage ac
📺 同じチャンネル
C14
Comparing Low Voltage Vs. Medium Voltage Equipment on Solar Sites
Business EnglishUniversity StudentsWorking Adults
C11
Types of Transmission Line Structures and Their Components
University StudentsWorking Adults
C1Understanding the Organization Working in Transmission
Business EnglishUniversity StudentsWorking Adults
C1Understanding Height and Clearance: Critical Design Parameters for Utility-Scale Solar Racking
Business EnglishUniversity StudentsWorking Adults
C1Inside Substation Transformers
University StudentsWorking Adults
C1What is Insulation Resistance Testing (IRT)?
Business EnglishUniversity StudentsWorking Adults
C1Unique Characteristics of Utility-Scale Solar Projects
Business EnglishUniversity StudentsWorking Adults
C1The Types of Drawings Used on Utility-Scale Solar Sites
Business EnglishUniversity StudentsWorking Adults
C1Some SCADA Acronyms Explained: What Beginners Need to Know
Business EnglishUniversity StudentsWorking Adults
✨ おすすめ動画
B21
27 文
PV 101 with SOLV Energy: How Utility-Scale Solar Power Works
Business EnglishUniversity StudentsWorking Adults
C11
7 文
Diodes Explained - The basics how diodes work working principle pn junction
Business EnglishUniversity StudentsWorking Adults
C17
60 文
What is SMT (Surface Mount Technology)? PCB Assembly (Part 2)
Business EnglishUniversity StudentsWorking Adults
C11
51 文
What's Under Your Feet in New York City?
Business EnglishUniversity StudentsWorking Adults
C12
131 文
Unit Conversion & Significant Figures: Crash Course Chemistry #2
Business EnglishUniversity StudentsWorking Adults
C11
166 文
What's The Best Supercharger? Roots vs Centrifugal vs Twin-Screw vs Electric
Business EnglishUniversity StudentsWorking Adults
C11
106 文
EDFR GWO BTT Training Center - Nicolas Riou Wind
Business EnglishUniversity StudentsWorking Adults
C11
506 文
Analyzing Statements of Cash Flows 1 (2025 CFA® Level I Exam – FSA – Learning Module 4)
Cambridge Exam PrepBusiness EnglishUniversity Students
C12
245 文
Power Plant | How it Works Power Plant Steam Cycle
Business EnglishUniversity StudentsWorking Adults
C11
19 文
I Made an EMP Device... It Actually Works
Business EnglishUniversity StudentsWorking Adults
C1101 文
BGP Overview
Business EnglishUniversity StudentsWorking Adults
このレッスンの語彙とスピーキングのポイント
この動画には、シャドーイング用の文が45文、単語が696語あります。 音声の長さは4:08です。 話す速さは1分あたり約169語で、日常会話に近い自然なペースです。 英語の頻出3,000語に含まれる単語は77%だけなので、語彙は難しめです。
この動画の重要語彙
動画に出てくる覚えておきたい単語15語を、発音と意味つきで紹介します。
| 単語 | 発音 | 意味 |
|---|---|---|
| voltage 名詞 | /ˈvəʊltɪd͡ʒ/ | 電圧 |
| module 名詞 | /ˈmɑd͡ʒul/ | モジュール |
| string 名詞 | /stɹɪŋ/ | 紐 |
| utility 名詞 | /juːˈtɪlɪti/ | 有用, 有用性 |
| slide 名詞 | /ˈslaɪ̯d/ | 滑り台 |
| sunlight 名詞 | /ˈsʌnˌlaɪt/ | 日光, 太陽光 |
| wire 名詞 | /ˈwaɪɚ/ | 針金, 線 |
| collect 動詞 | /ˈkɑlɪkt/ | 集める, 収集する |
| underground 形容詞 | /ˌʌn.dəɹˈɡɹaʊnd/ | 地下 |
| conversion 名詞 | /kənˈvɝʒən/ | 改宗 |
| grid 名詞 | /ɡɹɪd/ | 格子, グリッド |
| calculate 動詞 | /ˈkælkjʊleɪt/ | 計算する |
| minimize 動詞 | /ˈmɪn.ɪˌmaɪz/ | 最小化する |
| trench 名詞 | /ˈtɹɛnt͡ʃ/ | 塹壕, トレンチ |
| connect 動詞 | /kəˈnɛkt/ | 繋げる |
動画に出てくる句動詞
| 単語 | 意味 |
|---|---|
| go back 動詞 | 戻る, 帰る |
この動画の文法
話し手がよく使っている文型を、動画の実際の表現とともに紹介します。
| 文型 | 動画での表現 |
|---|---|
| 受動態 be + 過去分詞 — 誰がするかより、何が起きるかに焦点を当てる | is converted · are wired · will be located |
| 現在完了形 have/has + 過去分詞 — 過去の出来事が今も関係している | have reduced · has been transferred · has been produced |
| 関係詞節 who / which + 節 — 人や物について情報を加える | them, which makes · job, which is · electricity which has |
注意したい発音
話し手はyou're, they'll, we'reなど、短縮形や弱形を6回使っています。聞こえたとおりの短い形で発音しましょう。
- 「sh」と「zh」の音: conversion /kənˈvɝʒən/, transmission /tɹænsˈmɪʃən/, presentation /ˌpɹɛzn̩ˈteɪʃn̩/, termination /tɚmɪˈneɪʃən/
- 長い単語（アクセントの位置に注意）: electricity /ɪˌlɛkˈtɹɪsɪti/, electrical /ɪˈlɛktɹɪkəl/, utility /juːˈtɪlɪti/, termination /tɚmɪˈneɪʃən/, interconnect /ˌɪn.tə.kəˈnɛkt/
この動画での練習方法
- まず声を出さずに動画を最後まで聞き、知らない単語をメモします。
- まず0.75倍速で一文ずつシャドーイングし、慣れてきたら通常の速度に戻します。
- 自分の声を録音して元の音声と比べます。voltage, module, stringなどの単語に特に注意しましょう。
シャドーイングとは？英語上達に効果的な理由
シャドーイング（Shadowing）は、もともとプロの通訳者養成プログラムで開発された言語学習法で、多言語習得者として知られるDr. Alexander Arguelles によって広く普及されました。方法はシンプルですが非常に効果的：ネイティブスピーカーの英語を聞きながら、1〜2秒の遅延で声に出してすぐに繰り返す——まるで「影（shadow）」のように話者を追いかけます。文法ドリルや受動的なリスニングと異なり、シャドーイングは脳と口の筋肉が同時にリアルタイムで英語を処理・再現することを強制します。研究により、発音精度、抑揚、リズム、連音、リスニング力、そして会話の流暢さが大幅に向上することが確認されています。IELTSスピーキング対策や自然な英語コミュニケーションを目指す方に特におすすめです。