Luyện nói tiếng Anh bằng Shadowing qua video: QC 7 tools – Cause and Effect Analysis (Fishbone) Diagram Introduction
Đang tạo bài học...
1
Hello everyone, this is Working Bear.
2
Today I want to introduce you to something called the Fishbone Diagram, also known as a Cause and Effect Analysis Diagram.
3
Many of you might already know what a Fishbone Diagram is, but do you know how to actually draw one?
4
And what should you watch out for when creating one?
5
As the name suggests, the diagram looks like the skeleton of a fish.
6
That's where it gets its nickname.
7
Its formal name is Cause and Effect Analysis Diagram, because it's used to trace a problem, effect, back to its possible causes.
8
Originally, fishbone diagrams were used in product design to analyze causes of failure, or in manufacturing to find the root cause of quality issues and come up with solutions.
9
Nowadays, people use it in many industries to solve everyday work and life problems, too.
10
Some people also call it the Ishikawa Diagram, named after Dr. Kaoru Ishikawa, a Japanese quality control expert who developed this tool.
11
Drawing a fishbone diagram is actually very simple.
12
The basic version just uses a few arrows.
13
If you're someone who likes a little more creativity, check out Working Bear's YouTube video, How to Draw a Unique Fishbone Diagram in PowerPoint.
14
When quality instructors teach us how to draw fishbone diagrams, they usually mention that there are two main styles, based on the direction the fish's head points.
15
When the fish head points to the right, it's a cause-oriented fishbone diagram.
16
The head represents the problem, and the bones show possible causes.
17
So you write the problem that has already occurred at the fish's head.
18
The topic usually starts with why or directly names the issue, like, oh, why am I often late to work?
19
Oh, why is the SMT component attrition rate so high?
20
Then list the possible causes along the bones of the fish.
21
When the fish head points to the left, it's a solution-oriented fish bone diagram.
22
The head represents a goal, and the bones list potential solutions or actions.
23
The topic often starts with how to improve, prevent, solve, like, oh, how to avoid being late to work, oh, how to reduce the SMT component attrition rate,
24
then write possible countermeasures along the bones.
25
When used correctly, a fishbone diagram can be a powerful tool to solve tough problems.
26
In everyday life or at work, we often face issues.
27
Some problems are simple.
28
You can identify the cause right away, so no diagram is needed.
29
But other times, the cause is hidden and hard to figure out.
30
Our thoughts may become too scattered or unfocused to find the real root.
31
That's when a fishbone diagram comes in handy.
32
It helps you sort out all those scattered thoughts, narrow them down, and find the main possible causes.
33
After that, you can collect data, use stratification analysis, or prioritize the possible causes, verify them one by one,
34
and finally take action with a solid long-term solution.
35
So, before you draw a fishbone diagram, you should already have some ideas about what might be causing the problem.
36
Actually, whether you have ideas or not, Working Bear strongly recommends gathering a cross-functional team for a brainstorming session.
37
List all possible causes based on the problem, then use the fishbone diagram method to organize and discuss the likelihood of each cause.
38
As the saying goes, two heads are better than one, and this kind of teamwork helps prevent blind spots or tunnel vision.
39
Now let's walk through how to hold a meeting to create a fishbone diagram.
40
One, gather the right people.
41
Bring together everyone related to the issue or those with relevant knowledge or experience.
42
Avoid having just one person draw the diagram alone.
43
A good group size is around 4 to 10 people.
44
Two, use a whiteboard or large sheet of paper.
45
It's a good idea to have several colored markers.
46
Each person can use a different color.
47
These days, many people also use mind mapping software to draw the diagram digitally.
48
Three, start drawing the fishbone diagram.
49
Begin by sketching a basic fishbone shape on the board or paper, with the head pointing to the right, arrow to the right.
50
Write the problem clearly at the head of the fish.
51
Be sure to describe the issue in detail, its characteristics, symptoms, or signs, so everyone understands the context.
52
Label the main bones with major causes, the branches with subcauses, and the small tips with minor causes.
53
If you're analyzing design or manufacturing issues, many experienced teams use the classic 6M categories for the major causes,
54
manpower, method, material, machine, measurement, and mother nature, also call environment.
55
These six categories usually cover all types of causes and often relate to different departments, helping the team think broadly and clarify responsibilities.
56
Of course, you're free to group your main causes differently.
57
It doesn't have to follow the 6M structure.
58
Also, remember to place more likely or direct causes closer to the fish's head
59
and less likely or distant causes nearer the tail.
60
This helps focus attention on the most probable causes.
61
The goal is to make it easy for others, especially people unfamiliar with the issue or decision makers, to quickly see which causes are major and which are minor.
62
After all, reports are often made for others, so if your fishbone diagram is clear, there's less need for further explanation.
63
Four, take turns sharing causes.
64
Each participant should take 15-20 seconds to say one possible cause.
65
Keep going without interruptions.
66
No criticizing or questioning allowed during this phase.
67
The host or a note taker writes down each point on the diagram.
68
5. Time Limits Limit each person's speaking time to 20 seconds before moving to the next.
69
After a few rounds, once you've gathered 60-80 potential causes or people stop contributing, wrap up the brainstorming.
70
Try to keep the whole session under 30 minutes.
71
6. Prioritize the causes Now go through the list of causes.
72
Have each participant pick the ones they believe are most significant.
73
Circle these in red on the diagram once the group agrees.
74
Seven, narrow down the key causes.
75
Next, go through the circled causes again.
76
Let everyone pick out the most critical ones from the red circles.
77
Mark those with a second colored circle.
78
Repeat this process until no more can be added.
79
Finally, review the entire fishbone diagram.
80
The causes with the most circles are likely the main culprits behind the problem.
81
Now it's time to take action and find solutions based on those key causes.
82
Now, let's take a look at this fishbone diagram example.
83
Why have I been showing up late to work recently?
84
This is a typical right-facing fishbone diagram,
85
used to trace the possible causes of a problem problem.
86
And here's another one.
87
How can I avoid being late to work?
88
This is a left-facing fishbone diagram that focuses on finding solutions.
89
The next example is something Working Bear previously shared on the blog, a fishbone diagram about the source of oil contamination on keypad circuits.
90
Back then, Working Bear explained that a product at a previous company had a serious DOA, dead on arrival, complaint.
91
Most of the defective units had unresponsive keypads, specifically on the 3, 6, and 9 keys.
92
The root cause turned out to be oil contamination.
93
My company formed a temporary task force to investigate, even sending engineers to the contract manufacturer's factory.
94
To their credit, the factory was cooperative and had already done some internal troubleshooting on their own.
95
After a detailed investigation and summarizing findings with a cause and effect diagram,
96
the most likely root cause pointed to an operator mistakenly using flux instead of IPA, isopropyl alcohol, as a cleaner.
97
This flux was applied directly to the keypad contact circuits on the PCB.
98
Even though the source of the oil was identified, verifying it became another challenge.
99
Here, Working Bear briefly explained the two-part verification process simply.
100
First, we sent the returned defective units to a lab for chemical analysis.
101
We used FTIR, Fourier Transform Infrared Spectroscopy, because EDS, Energy Dispersive X-ray Spectroscopy,
102
only detects elements, not compounds.
103
The results showed a mixture of IPA and flux.
104
Second, we simulated three possible contamination scenarios.
105
A mixture of IPA and flux, we applied each substance to the PCB circuit,
106
then assembled the units immediately and let them sit for 24, 48, and 72 hours.
107
The results showed that the flux-only samples looked most similar to the actual oil stain issue, but didn't show any white powder.
108
The IPA and flux mixture did produce white powder, but didn't recreate the oily appearance.
109
So the likely culprit was a flux-heavy mixture of IPA and flux.
110
Eventually, the contract manufacturer admitted that their operators may have mistakenly used flux instead of IPA.
111
And during our on-site audit, we found that both flux and IPA were stored in the same cabinet.
112
To a new operator, the two containers might have looked the same, which made it easy to confuse one for the other.
113
This mix-up likely led to cross-contamination and the use of the wrong cleaning agent.
114
If you're interested in this oil contamination case, check out Working Bear's video.
115
The case study, oil and white powder contamination on PCB keypad contact, circuits causing keypad failures.
116
That's it for today's sharing.
117
If you're interested in electronics manufacturing, be sure to subscribe to Working Bear's YouTube and podcast channels.
118
Don't forget to like, subscribe, and share.
119
And if you can, please leave us a five-star review on Apple Podcasts.
120
It helps more people discover Working Bear's show.
121
All related links can be found in the episode description.
122
That's it for now.
123
Bye bye!
📺 Cùng kênh
B23
8D Reports Made Simple: How to Solve Problems at Work—and at Home
Business EnglishWorking Adults
B25 Key Mindsets Before You Start Writing an 8D Report
Business EnglishWorking Adults
C11
什麼是屏蔽罩(shielding can)？工程師對屏蔽罩的愛恨情仇
Business EnglishUniversity StudentsWorking Adults
C12
What is IMC (Intermetallic Compounds) part I? The role of IMC plays in the soldering
University StudentsWorking Adults
C12
What is IMC (Intermetallic Compounds) part II? The different between IMC, alloy, eutectic
University StudentsWorking Adults
C14
What is IMC (Intermetallic Compounds) part III? Explain Alloy, Eutectic in detail
University StudentsWorking Adults
C12
Deep Dive: Investigating Thermal Cycling Failures Cracked MSOP Solder Joints
Business EnglishUniversity StudentsWorking Adults
C12
What Are PCB and PCBA? What’s the Difference Between Them?
Business EnglishUniversity StudentsWorking Adults
C1How to evaluate whether an 8D report is well written
Business EnglishWorking Adults
✨ Video gợi ý
C12
236 câu
The 7 Quality Control (QC) Tools Explained with an Example!
Business EnglishUniversity StudentsWorking Adults
C16
35 câu
Results Framework and Logframe: MEAL DPro Starter
Business EnglishUniversity StudentsWorking Adults
C1166 câu
AI Animation Pipeline: How I Make Cartoons 100% With AI
Business EnglishUniversity StudentsWorking Adults
C11
29 câu
VMM I O-INSPECT I Curve
Business EnglishUniversity StudentsWorking Adults
C13
84 câu
What is the 8D report? (problem solving tools)
Business EnglishUniversity StudentsWorking Adults
C13
28 câu
0925.2 financial statements and ratios
Business EnglishUniversity StudentsWorking Adults
C1178 câu
Data Presentation, Step-by-Step | Google Data Analytics Certificate
Business EnglishUniversity StudentsWorking Adults
C11
92 câu
How Things Are Made | An Animated Introduction to Manufacturing Processes
Business EnglishUniversity StudentsWorking Adults
C15
94 câu
Your AI broke the layout. Now what?
Business EnglishUniversity StudentsWorking Adults
C11
50 câu
0.0.1 How to become a CAE Engineer CAE | What are the ways to become a CAE Engineer as a fresher
Business EnglishUniversity StudentsWorking Adults
C12
100 câu
How to Answer Situational Questions for Product (PM) Behavioral Interview | Framework + Solution
Business EnglishInterview EnglishUniversity Students
Video Này Dành Cho Ai?
Video này rất phù hợp cho các bạn đang học tiếng Anh ở mức độ trung cấp và muốn cải thiện khả năng phân tích vấn đề cũng như kỹ năng giao tiếp. Nếu bạn đang tìm kiếm cách để luyện nói tiếng Anh một cách hiệu quả, đặc biệt trong việc thảo luận và đưa ra giải pháp cho những vấn đề thực tế trong công việc hoặc cuộc sống hàng ngày, thì đây chính là nguồn tài liệu lý tưởng cho bạn. Video sẽ giúp bạn hiểu rõ hơn về cách sử dụng sơ đồ Fishbone, một công cụ hữu ích trong việc phân tích nguyên nhân và kết quả.
Các Từ Vựng & Thành Ngữ Đáng Chú Ý
- Sơ đồ Fishbone: Là một công cụ trực quan giúp phân tích nguyên nhân của các vấn đề. Tên gọi này được đặt theo hình dáng giống như xương cá.
- Nguyên nhân: Các yếu tố gây ra một vấn đề cụ thể, có thể được xác định qua việc phân tích.
- Giải pháp: Các hành động được đề xuất để khắc phục vấn đề đã được nhận diện.
- Đội ngũ đa chức năng: Đề cập đến việc tập hợp những người có kiến thức và kinh nghiệm khác nhau để cùng nhau giải quyết vấn đề.
Làm Thế Nào Để Phát Âm Đúng?
Để đạt được giọng nói tự nhiên và dễ nghe trong tiếng Anh, bạn cần chú ý đến ngữ điệu và cách nhấn âm. Trong video, người diễn giả có cách phát âm rõ ràng và dễ hiểu. Bạn có thể sử dụng phần mềm shadowing để luyện tập theo giọng của họ, giúp cải thiện khả năng luyện nghe nói qua video của mình. Hãy cố gắng bắt chước ngữ điệu và nhấn mạnh từ ngữ giống như cách người nói trong video để cải thiện kỹ năng giao tiếp của bạn. Việc này không chỉ giúp bạn tự tin hơn mà còn làm phong phú thêm vốn từ vựng và cách diễn đạt của bạn trong tiếng Anh.
Ngoài ra, hãy thử tham gia vào các buổi thảo luận nhóm hoặc lớp học để thực hành trực tiếp. Sử dụng shadowing tiếng anh là một phương pháp hiệu quả để bạn có thể nghe và nói cùng một lúc, từ đó cải thiện kỹ năng phản xạ và giao tiếp của mình. Chúc các bạn học tốt!
Ngữ pháp trong video
Những cấu trúc người nói dùng nhiều nhất, kèm đúng cụm từ trong video:
| Cấu trúc | Trong video |
|---|---|
| Câu bị động be + quá khứ phân từ — nhấn vào việc xảy ra, không phải người làm | is needed · is hidden · are often made |
| Thì hiện tại hoàn thành have/has + quá khứ phân từ — việc đã xảy ra nhưng còn liên quan đến hiện tại | has already occurred · you've gathered |
| Mệnh đề quan hệ who / which + mệnh đề — thêm thông tin về người hoặc vật | someone who likes · and which are |
Phương Pháp Shadowing Là Gì?
Shadowing là kỹ thuật học ngôn ngữ có cơ sở khoa học, ban đầu được phát triển cho chương trình đào tạo phiên dịch viên chuyên nghiệp và được phổ biến rộng rãi bởi nhà đa ngôn ngữ học Dr. Alexander Arguelles. Nguyên lý cốt lõi đơn giản nhưng cực kỳ hiệu quả: bạn nghe tiếng Anh của người bản xứ và lặp lại to ngay lập tức — như một "cái bóng" (shadow) đuổi theo người nói với độ trễ chỉ 1–2 giây. Khác với luyện ngữ pháp hay học từ vựng bị động, Shadowing buộc não bộ và cơ miệng phải đồng thời xử lý và tái tạo ngôn ngữ thực tế. Các nghiên cứu khoa học xác nhận phương pháp này cải thiện đáng kể phát âm, ngữ điệu, nhịp điệu, nối âm, kỹ năng nghe và độ lưu loát khi nói — đặc biệt hiệu quả cho người luyện IELTS Speaking và muốn giao tiếp tiếng Anh tự nhiên như người bản ngữ.