Pratique du Shadowing: Steam Frame: Official Overview and Quick Start Guide (Accessories) - Apprendre l'anglais à l'oral avec la vidéo

Création de la leçon...
1
In VR, better comfort improves immersion.
2
That's why we created the Ergonomic Accessories Kit.
3
It contains a set of three comfort-focused attachments: Controller hand straps, a top head strap, and an extended light blocker.
4
The hand straps, as the name implies, keep your controllers strapped to your hands.
5
Useful for people who like to really immerse their hands in the action or just relax them between intense bouts of gripping.
6
The top headstrap improves weight distribution and provides extra headset stability.
7
It's great for games that require a lot of moving and head bobbing.
8
Finally, while this standard light blocker that comes packaged with the Steam Frame works for the majority of people, there can be some light bleed for users with small noses.
9
Just more bad news for people with small noses?
10
No. In fact, the opposite.
11
The extended light blocker has these longer flaps that helps seal the area between the Frame and your tiny nose.
12
We understand this sounds like a joke, but it's a real problem that the extended light blocker solves.
13
Let's start with the right hand strap.
14
Grab your controller and remove the battery door.
15
Next, untie and remove the lanyard.
16
Now take the new right hand strap and replacement door.
17
The bottom buckle aligns perfectly with the groove at the base of the controller.
18
Press it firmly into place, then rotate it clockwise by 90 degrees until you hear a click.
19
Next, feed the upper strap through one of the mounting slots.
20
Use the upper slot for smaller hands, or the lower slot if you have bigger hands and want a roomier fit.
21
Secure the strap using the Velcro fastener, then flip the controller door over and slide it back into place until it clicks.
22
Finally, slide your hand through the strap and tighten it until it feels secure — comfortable, but locked in for gameplay.
23
Now simply repeat the exact same steps for the left hand side controller, but mirrored.
24
To install the top strap and light blocker, start by removing the face gasket.
25
Then locate the three release latches on the headset.
26
The first is positioned at the top, near the forehead area.
27
The other two are located near the bottom, around the cheekbone area.
28
Slide each latch fully inward until the red mark becomes visible.
29
Then gently separate the headset core module.
30
Now remove the current light blocker and replace it with your new one.
31
Once installed, reattach the headset core module.
32
Don't forget to lock all three latches back into place.
33
You'll know they're locked when the red marks completely disappear.
34
Next, grab the top strap buckle and slide it into the notch at the top of the headset.
35
Then rock it toward you until you hear a click.
36
Finally, open one of the rear side guides and fit it over the back section of the head strap.
37
Repeat the same step on the opposite side.
38
To learn more about your Steam Frame, visit this link.

Vocabulaire et conseils d’expression pour cette leçon

Cette vidéo contient 38 phrases et 496 mots à répéter en shadowing. La partie parlée dure 3:39. Le locuteur parle à un rythme régulier d’environ 136 mots par minute, confortable pour le shadowing. Seuls 77 % des mots font partie des 3 000 mots les plus courants en anglais, le vocabulaire est donc exigeant.

Vocabulaire clé de cette vidéo

15 mots de la vidéo à retenir, avec leur prononciation et leur sens :

MotPrononciationSens
strap nom/stɹæp/sangle, courroie
controller nom/kənˈtɹoʊlɚ/contrôleur, manette
headset nom/ˈhɛdsɛt/casque, casque-micro
slide nom/ˈslaɪ̯d/toboggan, glissoire
extend verbe/ɛkˈstɛnd/étendre
slot nom/slɑt/emplacement, fente
comfort nom/ˈkʌm.fət/confort
locate verbe/ˈloʊˌkeɪt/localiser
module nom/ˈmɑd͡ʒul/module
buckle nom/ˈbʌkəl/boucle
mirror nom/ˈmiɹɚ/glace, miroir
mount verbe/maʊnt/monter, grimper
package nom/ˈpæk.ɪd͡ʒ/paquet, paquetage
replacement nom/ɹɪˈpleɪsmənt/remplaçant, substitut
solve verbe/sɒlv/résoudre, régler

Prononciation à surveiller

Le locuteur utilise 3 contractions et formes réduites, comme don't, they're, you'll. Prononcez-les sous leur forme courte, telles que vous les entendez.

Comment s’entraîner avec cette vidéo

  1. Écoutez la vidéo en entier une fois sans parler et notez les mots que vous ne connaissez pas.
  2. Répétez phrase par phrase à vitesse normale, en reprenant chacune jusqu’à ce que votre rythme corresponde à celui du locuteur.
  3. Enregistrez-vous et comparez avec l’original, en faisant attention à des mots comme strap, controller, headset.

Qu'est-ce que la technique du Shadowing ?

Le Shadowing est une technique d'apprentissage des langues fondée sur la science, développée à l'origine pour la formation des interprètes professionnels. Le principe est simple mais puissant : vous écoutez de l'anglais natif et le répétez immédiatement à voix haute — comme une ombre suivant le locuteur avec un décalage de 1 à 2 secondes. Les recherches montrent une amélioration significative de la précision de la prononciation, de l'intonation, du rythme, des liaisons, de la compréhension orale et de la fluidité.

Technique du shadowing : lire le guide complet étape par étape →