Luyện nói tiếng Anh bằng Shadowing qua video: Centrifugal Pump Basics - How centrifugal pumps work working principle hvacr

Chọn chế độ luyện tập

Mỗi chế độ mở một phòng luyện tập toàn màn hình.

132 câu
Nếu các câu quá ngắn hoặc quá dài, hãy bấm Edit để chỉnh sửa.
1
Hey there guys, Paul here from TheEngineeringMindset .com.
2
In this video, we're going to be looking at centrifugal pumps to learn the basics of how they work, the different types and where we use them.
3
You can get more information on centrifugal pumps, shop for parts and accessories or talk to experts on top pump brands like Bell & Gossett,
4
Taco and more by visiting Statesupplier .com who have kindly sponsored this video.
5
Simply click on the link in the video description down below to find out more.
6
Centrifugal pumps come in many shapes, colors, and sizes, but they typically look something like this.
7
The pumps consist of two main parts, the pump and the motor.
8
The motor is an electrical induction motor, which allows us to convert electrical energy into mechanical energy.
9
This mechanical energy is used to drive the pump and move the water.
10
The pump pulls water in through the inlet
11
and pushes it out through the outlet as we take the unit apart we can see
12
that we have a fan
13
and a protective casing mounted at the back of the electrical
14
motor then inside the motor we have the stator the stator holds the copper coils
15
and we're going to look in detail at that a little later in this video
16
concentric to this we have the rotor and shaft the rotor rotates
17
and as it rotates so does the shaft the shaft runs the entire length from the motor and into to the pump.
18
This then connects into the pump's impeller.
19
Some models of centrifugal pumps, like this one, will have a separate shaft for the pump and the motor.
20
Separated shafts are joined using a connection known as a coupling.
21
Coupled pumps will usually have a bearing house which, as the name suggests, houses the bearings.
22
The shaft continues into the pump casing.
23
As it enters the casing, it passes through a gland, packing, and the stuffing box, which combine to form a seal.
24
The shaft then connects onto the impeller.
25
The impeller imparts centrifugal force onto the fluid which enables us to move liquids, such as water, through a pipe.
26
The impeller is enclosed within the pump casing.
27
The casing contains and directs the flow of water as the impeller pulls it in and pushes it out.
28
Therefore, we have a suction inlet and a discharge outlet.
29
At the back of the electrical motor, we see that the fan is connected to the shaft.
30
When the motor rotates the shaft, the fan will therefore also rotate.
31
The fan is used to cool down the electrical motor
32
and it will blow ambient air over the casing to dissipate the unwanted heat.
33
If the motor becomes too hot, the insulation on the coils inside the motor will melt, causing the motor to short circuit and destroy itself.
34
The fins on the outside perimeter of the casing increase the surface area of the casing
35
which allows us to remove more unwanted heat.
36
The electrical motor comes in either three phase or single phase configuration depending on the application.
37
We're going to look at three phase as this is the most common.
38
Inside the three phase induction motor, we have three separated coils which are wound around the stator.
39
Each coil set is connected to a different phase to produce a rotating magnetic field.
40
When we pass AC or alternating current through each coil, the coil will produce an electromagnetic field
41
which changes in intensity as well as polarity as the electrons passing through it change direction between forwards and backwards.
42
But if we connect each coil to a different phase then the electrons will change direction between forwards
43
and backwards at a different time compared to the other phases.
44
This means
45
that the magnetic field of each coil will change in intensity
46
as well as polarity at a different time compared to the other phases.
47
To distribute this magnetic field we rotate the coils 120 degrees from the previous phase
48
and insert them into the stator of the motor casing.
49
This will create the effect of a rotating magnetic field.
50
At the center of the stator we place the rotor and shaft.
51
The rotor will be affected by the rotating magnetic field and will force it to also rotate.
52
The rotor is connected to the shaft
53
and the shaft runs from the fan through the rotor all the way up to the impeller.
54
This way when the rotor rotates so will the impeller.
55
So now by creating the rotating magnetic field within the motor we spin the rotor
56
which spins the shaft and this spins the impeller.
57
Looking at the pump casing we find a channel for water to flow along which is called the volute.
58
This volute spirals around the perimeter of the casing up to the pump outlet.
59
This channel increases in diameter as it makes its way to the outlet.
60
The shaft passes through the seals and into the pump casing where it connects to the impeller.
61
There are many types of impeller, but most will have these backward curved vanes which will either be open, semi -open, or closed with some shrouds.
62
These backward curved vanes do not push the water.
63
The curves rotate with the outer edge moving in the direction of the expanding volute.
64
These vanes will provide the fluid with a smooth path for the water to flow.
65
We'll see that a little later in this video.
66
The impeller is submerged in water.
67
When the impeller rotates, the water within the impeller also rotates.
68
As the water rotates, the liquid is radially pushed out in all directions to the edge of the impeller
69
and into the volute.
70
As the water moves outwards off the impeller, it creates a region of low pressure which pulls more water in through the suction inlet.
71
The water enters into the eye of the impeller and it's trapped there between the blades.
72
As the impeller rotates, it imparts kinetic energy or velocity onto the water.
73
By the time the water reaches the edge of the impeller, it has reached a very high velocity.
74
This high speed water flows off the impeller and into the volute, where it hits the wall of the pump casing.
75
This impact converts the velocity into potential energy or pressure.
76
More water follows behind this and so a flow develops.
77
The volute channel has an expanding diameter as it spirals around the circumference of the pump casing.
78
As it expands, the velocity of the water will decrease, resulting in pressure increasing.
79
This expanding channel therefore allows more water to keep joining and converting into pressure.
80
So the discharge outlet is therefore a higher pressure than the suction inlet.
81
The high pressure at the discharge allows us to force the fluid through pipes
82
and into a storage tank or around a pipe system.
83
The thickness of the impeller and the rotational speed affects the volume flow rate from the pump.
84
But the diameter of the impeller and the rotational speed will increase the pressure it can produce.
85
Centrifugal pumps are represented in engineering drawings with symbols like these.
86
They can vary slightly from this, so do check the drawings information section.
87
NPSH A term you're going to hear is the NPSH, which is the acronym for Net Positive Suction Pressure.
88
We'll briefly cover what this means.
89
There are two letters at the end of the acronym, the NPSHR and the NPSHA.
90
The R is the required NPSH.
91
Each pump is tested for this value, and this can be obtained from the pump manufacturer by the pump's operating chart.
92
Don't worry about this confusing looking chart at this point, we're going to break it down and cover that in detail in a dedicated video.
93
Links to that in the video description down below.
94
The R value is basically a warning or danger point.
95
As the water enters the pump and flows into the impeller's eye, it experiences a lot of energy due to the friction.
96
This will give us a pressure drop.
97
at certain conditions the water flowing through this section can reach boiling point
98
when this occurs we refer to this as cavitation we're going to see more on that in just a moment
99
the other letter was the a
100
and this is the mpsh available this depends on the insulation of the pump
101
and needs to be calculated it considers things such as insulation type
102
and elevation liquid temperature liquid boiling point etc the available pressure should always be higher than the required value.
103
For example if we have an insulation
104
and we calculate the NPSH A as 11
105
but the pump requires an NPSH R of 4 then the pump should be okay.
106
However if we installed a pump
107
that required an NPSH R of 13 then the available NPSH is insufficient and cavitation will occur.
108
So what is cavitation?
109
As we know water can turn from a liquid state into steam or a gas state.
110
We know that water boils at around 100 degrees Celsius
111
and that's because it's at sea level which has an atmospheric pressure of 101 .325 kPa.
112
But if we went to the top of Mount Everest then water boils here at just 71 degrees Celsius
113
and that's because the atmospheric pressure has reduced to 34 kPa.
114
As the atmospheric pressure reduces it becomes easier for the water to boil.
115
So at the suction inlet of the pump we know
116
that there is going to be a pressure drop and
117
if this pressure is less than the vapor pressure of the liquid being pumped then the water can reach boiling point.
118
When this happens cavitation occurs.
119
During cavitation air particles within the water will expand as they reach boiling point.
120
These will then collapse in on themselves very rapidly.
121
As they collapse they will damage the impeller as well as the pump casing.
122
This remove small parts of metal from the surface and if this keeps occurring then it will eventually destroy the pump.
123
Therefore we must ensure the available pressure is higher than the required pressure of the pump.
124
We use centrifugal pumps everywhere.
125
We use them to move liquids from one tank to another or around a system. For example,
126
we might use a small in -line centrifugal pump in our domestic heating circuit to move heated water around the property.
127
We might use a large centrifugal pump to move the condenser water from a chiller's condenser
128
and up to the cooling tower on the roof as part of the centralized cooling system.
129
We're going to look at the type of pumps and their application in our next video in this series.
130
Okay, that's it for this video, but to continue your learning then check out one of the videos on screen now
131
and I'll catch you there for the next lesson.
132
Don't forget to follow us on Facebook, Twitter, Instagram as well as

Tải Ứng Dụng

Mọi thứ bạn cần để nói trôi chảy

Chấm điểm AIChấm từng câu nói
Luyện IPAThành thạo mọi âm
Từ vựngMở rộng vốn từ
Game Từ vựngHọc qua chơi

Cùng kênh

FOR YOU

Video gợi ý

Bối cảnh & Nền tảng

Trong video này, người dẫn chương trình giải thích về cách hoạt động của bơm ly tâm, một thiết bị quan trọng trong nhiều lĩnh vực như xây dựng và kỹ thuật. Bằng cách phân tích cấu tạo và nguyên lý hoạt động của bơm, người xem sẽ hiểu được không chỉ cách mà bơm di chuyển chất lỏng, mà còn là các thành phần và quy trình liên quan đến việc vận hành nó. Đây là một cơ hội tuyệt vời để học ngôn ngữ Anh trong bối cảnh kỹ thuật, nơi mà từ vựng chuyên ngành thường xuyên được sử dụng.

5 Câu Nói Hữu Ích Trong Giao Tiếp Hàng Ngày

  • How does it work? - Nó hoạt động như thế nào?
  • Can you explain that again? - Bạn có thể giải thích lại điều đó không?
  • What are the main components? - Các thành phần chính là gì?
  • Where is it used? - Nó được sử dụng ở đâu?
  • Is there a maintenance guide? - Có hướng dẫn bảo trì không?

Hướng Dẫn Shadowing Bước Từng Bước

Để cải thiện khả năng giao tiếp tiếng Anh của bạn thông qua phương pháp shadowing, bạn cần làm theo một số bước cụ thể khi theo dõi video này. Đầu tiên, hãy tập trung vào từng câu và nghe kỹ. Việc lắng nghe sẽ giúp bạn nhận diện được ngữ điệu và cách phát âm chính xác.

Sau đó, hãy thử nói theo ngay lập tức sau khi nghe từng câu. Đây là lúc bạn áp dụng kỹ thuật shadowspeak. Hãy chú ý đến cách nhấn âm và ngữ điệu để làm cho câu nói của bạn tự nhiên hơn. Sử dụng phần mềm shadowing có thể giúp bạn ghi âm giọng nói của mình để so sánh với video, từ đó bạn có thể điều chỉnh và cải thiện phương pháp phát âm của mình.

Cuối cùng, hãy luyện tập thường xuyên và kiên nhẫn. Kỹ năng nói sẽ không cải thiện overnight; bạn cần dành thời gian để thực hành. Việc kết hợp các câu nói hữu ích từ video vào cuộc sống hàng ngày sẽ giúp bạn tăng cường khả năng giao tiếp và tự tin hơn khi sử dụng tiếng Anh.

Ngữ pháp trong video

Những cấu trúc người nói dùng nhiều nhất, kèm đúng cụm từ trong video:

Cấu trúcTrong video
Câu bị động be + quá khứ phân từ — nhấn vào việc xảy ra, không phải người làmare joined · is enclosed · is connected
Mệnh đề quan hệ who / which + mệnh đề — thêm thông tin về người hoặc vậtcoils which are · along which is · vanes which will
Thì hiện tại hoàn thành have/has + quá khứ phân từ — việc đã xảy ra nhưng còn liên quan đến hiện tạihave kindly sponsored · has reached · has reduced

Phương Pháp Shadowing Là Gì?

Shadowing là kỹ thuật học ngôn ngữ có cơ sở khoa học, ban đầu được phát triển cho chương trình đào tạo phiên dịch viên chuyên nghiệp và được phổ biến rộng rãi bởi nhà đa ngôn ngữ học Dr. Alexander Arguelles. Nguyên lý cốt lõi đơn giản nhưng cực kỳ hiệu quả: bạn nghe tiếng Anh của người bản xứ và lặp lại to ngay lập tức — như một "cái bóng" (shadow) đuổi theo người nói với độ trễ chỉ 1–2 giây. Khác với luyện ngữ pháp hay học từ vựng bị động, Shadowing buộc não bộ và cơ miệng phải đồng thời xử lý và tái tạo ngôn ngữ thực tế. Các nghiên cứu khoa học xác nhận phương pháp này cải thiện đáng kể phát âm, ngữ điệu, nhịp điệu, nối âm, kỹ năng nghe và độ lưu loát khi nói — đặc biệt hiệu quả cho người luyện IELTS Speaking và muốn giao tiếp tiếng Anh tự nhiên như người bản ngữ.

Phương pháp shadowing: đọc hướng dẫn từng bước đầy đủ →