跟讀練習: Basic Engineering tools - 通過影片學習英語口語
選擇練習模式
每種模式都會開啟全屏練習室。
57 句
如果句子過短或過長，請點選 Edit 進行調整。
1
Hi, welcome to my latest video and thanks for watching.
2
In this next session of videos I'm going to concentrate further on the basic tools
3
that you need as an engineer and give you the words
4
that you need associated with these tools or that you use with these tools.
5
But first let me thank everybody who has subscribed to the channel.
6
I hope you're enjoying it.
7
Don't forget you can leave some feedback if you'd like
8
and let me know how I can make the videos better for your learning.
9
In the future I'm planning to do more interactivity with the videos that I make.
10
I've just got to learn about the software
11
but in the meantime enjoy this next session of videos and I hope you keep watching.
12
Thanks for watching up to now.
13
Bye.
14
Files.
15
We use files to smooth rough edges.
16
To smooth means to make something flat or even.
17
Rough is a surface that is not flat or not even.
18
We can say to file something.
19
I am filing something.
20
I have filed.
21
Hacksaw A hacksaw is a fine-toothed saw,
22
principally made for cutting metal.
23
Fine-toothed saw is a saw with many small teeth.
24
Principally means the main or most important.
25
A hacksaw's main use is for cutting metal.
26
And here we can use the word hacksaw as a verb. To hacksaw something.
27
I'm hacksawing a piece of metal off.
28
And I hacksawed something yesterday.
29
Taps.
30
A tap is used to cut a female thread.
31
an internal thread of a nut.
32
A thread is the high line that goes around the inside of a nut
33
and a nut is a piece of metal
34
that has a hole through it so
35
that it can be screwed onto a bolt or a screw
36
and we use the verb to tap for this to tap a thread.
37
I tapped a thread.
38
Dies A die is used to cut the male or the external thread of a bolt.
39
The thread here is the high line
40
that goes around the outside of a bolt or a screw
41
and a bolt is a piece of metal that has an external thread so that it can be screwed onto a nut.
42
Here we normally use the verb cut and we talk about to cut a thread or cutting a thread.
43
Reamers.
44
We use reamers to enlarge holes or for removing burrs.
45
enlarge means to make something larger or bigger we use the verb to ream
46
when we use a reamer we might say something like this
47
hole needs reaming out burr is a rough area on a piece of metal
48
that is left after the metal is cut or drilled
49
and to take the burr away we use the verb to deburr so we might say this hole needs deburring
50
and then you can use a reamer
51
So I hope you enjoyed that video.
52
Now comes a little quiz so you can test your knowledge.
53
The answers come at the end of the quiz.
54
So as you answer them, write down your answer, or if you need to speak English,
55
remember you can record your answers on your smartphone or on your computer enjoy the quiz
56
Thank you.
57
Thank you.
同頻道
FOR YOU
推薦影片
B21
114 句
How To Learn To Fix Cars (Beginner’s Guide)
Daily ConversationWorking Adults
B21
285 句
The basics in Amplitube 5
Daily ConversationWorking Adults
B22
5 句
Nature's Carpenter: Precision in Every Peck 🪵🔨
Daily ConversationWorking Adults
B25
336 句
100 MOST COMMON ENGLISH WORDS | A1-B2 VOCABULARY
Daily ConversationWorking Adults
B21
241 句
Construction Safety Training Video // Over 40 Topics
Daily ConversationWorking Adults
B11
43 句
Basic Knife Skills | Allrecipes
Daily ConversationWorking Adults
C12
333 句
Basic Introduction To Oil & Gas Well Perforating
Daily ConversationWorking Adults
C12
112 句
DFM And DFA Explained
Daily ConversationWorking Adults
C13
122 句
How To Read A Datasheet - Electronics with Becky Stern | DigiKey
Daily ConversationWorking Adults
B11
17 句
Speak Out (3rd Ed) B1 Unit 8 BBC Vlog
Daily ConversationWorking Adults
本片段的口語學習目標
通過學習工程工具相關表達，提升描述工具功能與使用場景的流利度，同時掌握實用動詞短語的運用。適合想要在專業場景或日常對話中更準確表達的學習者，尤其能幫助鍛鍊“影子跟讀”（shadow speak）時的語句節奏把控能力。
實用短語庫
- smooth rough edges（打磨粗糙邊緣）
- cut a thread（切削螺紋）
- enlarge holes（擴大孔洞）
- remove burrs（去除毛邊）
- file something（銼削某物）
- hacksaw a piece of metal（用鋼鋸切割金屬）
攻克你的薄弱點
影片中大量涉及專業工具名稱與動作描述，其發音特點是重音清晰、節奏明快。比如“reamer”（鉸刀）的重音在第一個音節，“deburr”（去毛邊）的發音要注意“burr”的捲舌音。通過“英語影子跟讀”（shadow speech）練習，可有效改善對這類詞彙的發音準確性。建議使用“shadowing site”進行逐句模仿，重點關注動詞短語的連讀（如“tap a thread”）和名詞的重音位置。堅持練習能顯著“提高英語發音”，讓你在描述工具使用時更自信、更流暢。
影片中的語法
說話人最常用的結構，並附上影片中的原話：
| 結構 | 影片中的用法 |
|---|---|
| 被動語態 be + 過去分詞 — 強調發生了什麼，而不是誰做的 | can be screwed · is left |
| 現在完成時 have/has + 過去分詞 — 過去發生但與現在仍有關聯的事 | has subscribed · have filed |
什麼是跟讀法？
跟讀法 (Shadowing) 是一種有科學依據的語言學習技巧，最初開發用於專業口譯員的培訓，並由多語言者Alexander Arguelles博士普及。這個方法簡單而強大：您在聽英語母語原聲的同時立即大聲重複——就像是一個延遲1-2秒緊跟說話者的影子。與被動聽力或語法練習不同，跟讀法強迫您的大腦和口腔肌肉同時處理並模模擬實的講話模式。研究表明它能顯著提高發音準確性，語調，節奏，連讀，聽力理解和口語流利度——使其成為雅思口語備考和真實英語交流最有效的方法之一。