Shadowing Practice: How does a nuclear power plant work? - Learn English Speaking with Video

Elige un modo de práctica

Cada modo abre una sala de práctica a pantalla completa.

42 oraciones
Si las oraciones son demasiado cortas o largas, haz clic en Editar para ajustarlas.
1
Electra -Belle has seven nuclear power plants, four in Doule and three in Tiange,
2
covering half of the electricity consumption in Belgium without producing CO2.
3
But how exactly does a nuclear power plant work?
4
A nuclear power plant works to a large extent like a conventional thermal power plant.
5
Water is converted into steam, which drives a turbine connected to a generator.
6
This generator converts the mechanical energy into electrical energy.
7
The only difference is that the heat, which converts water into steam, is produced by nuclear fission and not by burning coal, natural gas or biomass.
8
The nuclear power plants of Duhl and Tiange use fissile uranium oxide.
9
Uranium oxide is compressed into fuel pellets and packed into sealed fuel rods.
10
Multiple rods in turn form fuel elements which are immersed in water within a reactor vessel made of 20 cm thick steel.
11
The reactor vessel is subsequently hermetically sealed.
12
The fission of the uranium can now begin by bombarding it with neutrons.
13
In each fission, two or three neutrons are released.
14
They in turn cause new fissions and thus creating a chain reaction.
15
In a nuclear reactor, it's important that this chain reaction is controlled.
16
After each fission, only one released neutron should cause a new fission.
17
Boric acid in the water of the reactor vessel and lowered control rods absorb the oversupply of neutrons.
18
By lowering all the control rods at the same time, the chain reaction is stopped within 1 .3 seconds.
19
A nuclear power plant with a pressurized water reactor, such as Dool and Tiange, has three completely separated water circuits.
20
A primary circuit, a secondary circuit, a tertiary circuit.
21
In the primary circuit, the heat released during the fission of the uranium nuclei heats
22
up the water in the reactor vessel to the temperature of 320 degrees Celsius.
23
The pressure regulator keeps everything under high pressure, so the water does not boil or form steam hence the name High Pressure Reactor.
24
The hot water passes via the primary circuit to a heat exchanger or steam generator.
25
This is a cylindrical device with thousands of pipes in reverse U shape.
26
The water runs through these pipes and gives the heat to the water of the secondary circuit, which flows alongside the exterior of the pipes.
27
The water in the secondary circuit heats up and turns into steam.
28
The steam from the steam generators drives one or more steam turbines.
29
These turbines consist of a series of blades installed on a shaft.
30
The high pressure of the steam causes the shaft to rotate very fast.
31
This, in turn, drives a generator, which ultimately produces electricity, somewhat like a dynamo on a bicycle.
32
Transformers increase the voltage of the electricity produced by the generator, allowing transportation of the electricity to the end users with as little loss as possible.
33
To cool down, the steam coming from the turbines passes through a condenser.
34
The cooling water from the tertiary circuit passes through the tubes of the condenser.
35
In Dool, this cooling water comes from the schelder, in tiage, from the mass.
36
The steam from the secondary circuit condenses to water and is returned to the steam generator to be heated again to steam.
37
The warmed cooling water is brought to the cooling tower.
38
There, it cools through contact with an ascending airflow, the natural chimney effect as it were.
39
The majority of this water is collected in a basin at the bottom of the cooling tower
40
and then returned to the condenser.
41
Almost all the water is subsequently discharged back into the schelder or the mass.
42
Only a small part leaves the cooling tower as water vapor.

Descargar app

Todo lo que necesitas para hablar con fluidez

Pronunciación con IAEvalúa cada oración
Práctica de IPADomina cada sonido
VocabularioConstruye tu banco de palabras
Juego de vocabularioAprende mientras juegas
FOR YOU

Recomendar Video

Vocabulario y notas de pronunciación para esta lección

Este vídeo tiene 42 frases y 605 palabras para practicar shadowing. La parte hablada dura 3:56. El hablante habla a un ritmo natural de unas 154 palabras por minuto, cercano a una conversación cotidiana. Solo el 70 % de las palabras está entre las 3.000 más comunes del inglés, por lo que el vocabulario es exigente.

Vocabulario clave de este vídeo

15 palabras del vídeo que vale la pena aprender, con su pronunciación y significado:

PalabraPronunciaciónSignificado
generator sustantivo/ˈdʒɛnəɹeɪtə(ɹ)/generador, generador eléctrico
reactor sustantivo/ɹiˈæktɚ/reactor
vessel sustantivo/ˈvɛsəl/embarcación, barco
uranium sustantivo/ˌjuː.ˈɹeɪ.ni.əm/uranio
turbine sustantivo/ˈtɜː.baɪn/turbina
pipe sustantivo/ˈpaɪp/caramillo, flauta f)
convert verbo/kənˈvɝt/convertir
seal sustantivo/siːl/sello
subsequently adverbio/ˈsʌb.sɪ.kwənt.li/posteriormente
shaft sustantivo/ˈʃɑːft/asta, astil
oxide sustantivo/ˈɑksaɪd/óxido
tertiary adjetivo/ˈtɜː.ʃi.ə.ɹiː/terciario
extent sustantivo/ɪkˈstɛnt/extensión
element sustantivo/ˈɛləmənt/elemento
thick adjetivo/θɪk/grueso, espeso

Phrasal verbs que vas a escuchar

PalabraPronunciaciónSignificado
pass through verboatravesar
cool down verbo/kuːl ˈdaʊn/enfriarse
run through verboresumir

Pronunciación a tener en cuenta

  • Los sonidos de “th”: thick /θɪk/, thermal /ˈθɜːməl/
  • Los sonidos de “sh” y “zh”: shaft /ˈʃɑːft/, tertiary /ˈtɜː.ʃi.ə.ɹiː/, consumption /kənˈsʌmp.ʃən/, conventional /kənˈvɛnʃənl̩/, fission /ˈfɪʃən/
  • Palabras largas — cuida el acento: generator /ˈdʒɛnəɹeɪtə(ɹ)/, electricity /ɪˌlɛkˈtɹɪsɪti/, uranium /ˌjuː.ˈɹeɪ.ni.əm/, subsequently /ˈsʌb.sɪ.kwənt.li/, tertiary /ˈtɜː.ʃi.ə.ɹiː/

Cómo practicar con este vídeo

  1. Escucha el vídeo entero una vez sin hablar y anota las palabras que no conoces.
  2. Empieza a velocidad 0,75×, haz shadowing frase por frase y vuelve a la velocidad normal cuando te resulte fácil.
  3. Grábate y compara con el original, prestando atención a palabras como generator, reactor, vessel.

¿Qué es la Técnica de Shadowing?

Shadowing es una técnica de aprendizaje de idiomas respaldada por la ciencia, desarrollada originalmente para la formación de intérpretes profesionales y popularizada por el políglota Dr. Alexander Arguelles. El método es simple pero poderoso: escuchas audio en inglés nativo y lo repites en voz alta de inmediato, como una sombra que sigue al hablante con solo 1-2 segundos de retraso. A diferencia de la escucha pasiva o los ejercicios de gramática, el shadowing obliga a tu cerebro y músculos de la boca a procesar y reproducir simultáneamente patrones de habla reales. Las investigaciones muestran que mejora significativamente la precisión de la pronunciación, la entonación, el ritmo, el habla conectada, la comprensión auditiva y la fluidez al hablar, convirtiéndola en una de las metodologías más efectivas para la preparación del IELTS Speaking y la comunicación en inglés en el mundo real.

Técnica de shadowing: lee la guía completa paso a paso →