शैडोइंग अभ्यास: Variador de Frecuencia Explicado - Conceptos Básicos del VFD Inversor de IGBT - वीडियो के साथ अंग्रेजी बोलना सीखें

अभ्यास मोड चुनें

हर मोड पूरी स्क्रीन का अभ्यास कक्ष खोलता है।

168 वाक्य

यदि वाक्य बहुत छोटे या लंबे हों, तो समायोजित करने के लिए Edit पर क्लिक करें।

Hello everyone, Paul from EngineeringMindset.com.

In this video we are going to see the VFD, starting with the basic to understand how they work.

Remember that electricity is dangerous and can be fatal.

They must be trained and competent to carry out any electrical work.

If you work in HVAC, then you need to review the inverter's compresors that have been patrocinated this video.

When they use it in combination with the variable speed, like the VFD, that we are covering in the video of today, they make that all your unit HVAC is more efficient,

earning money to you and your clients.

If you want to know more, Danfoss has several capacities in line and stories of cases to consult.

You can find them using the link in the description below.

VFD are the English sign in English of a frequency and they are similar to this.

Also, they could also call the velocity of speed because they use them to control the velocity of a motor of CA.

We find the CAA and VFD used in all industries, especially the HVAC.

For example, we can find the use of the velocity of a compressor in a refrigeration system,

which allows exactly the demand of refrigeration and that result in an important ahorro of energy.

Traditionally, we would have had to use compressors fixed speed that simply open and apagant, resulting in a poor control.

We also found them used to control things like bombs and ventilators in systems of HVAC to allow us to gain energy, improve the energy and control.

The VFD is connected to the electric energy in the motors.

The unit can vary the frequency of electricity

that is used to accionar the motor and we can control the speed of rotation of the motor.

Therefore, we have our frequency variable.

To understand how a VFD works, first we need to understand some basic fundamentals of electricity.

There are two types of electricity and the first one is the CD or the direct current.

This is the most simple type and we get from batteries, panels, solar, etc. You can imagine the CD as a river with a water that flows in one direction.

With the direct current, the electron only flows in a single direction.

I am using the current current current, which is negative to positive, but you may be used to see the conventional current current, which is positive to negative.

The current current current is what really is happening.

The conventional theory was the original theory.

Only we have to take into account the two theories and the one we are using.

For that electricity flow, we need to complete the circuit.

The electricity always tries to return to its source.

When we use a oscilloscope to look at the shape of the electrician for the direct current current, we obtain this plane plane at maximum voltage in the positive region.

If we cut the energy, the line falls to zero.

If we turn and open repeatedly, we obtain a square pattern between zero and maximum.

If we press the interruptor to open and close during different time periods, then we obtain a pulsant pattern.

The other type of electricity is the CA or the alternative.

This type of electricity is the one that will be obtained from your houses and places of work.

With this type of electricity, the electrones inside the copper cable are constantly investing and flow towards the back, towards the back, towards the back,

etc. It can be considered this type of electricity as the sea of the sea that flows between two points maximum, the high and low.

If we follow the copper cables to the generator, the cables are connected to the bobinas that are inside the generator.

In a basic generator we also find an imane in the center that is girly.

The imane has a north and a south, or you can think of it as half positive and half negative.

The electrones of the lamp are charged negatively.

As you know, the imanes push or attract depending on the polarity.

As soon as the iman turns out, the mid-sponsors and negative sides will push and attract the electrones inside the copper copper and also through cables connected.

The magnetic field of the magnetic field varies in intensity.

We can see the magnetic field of magnetic field radiating some of the iron iron iron on the iron.

So as the magnetic field of magnetic field of magnetic field, this will experience a change in the magnetic field of magnetic field from zero to its maximum intensity and then,

as it passes through the magnetic field, will continue to zero.

Then the negative is the electron to the same change of intensity.

Therefore, each of the whole rotation of the imán will produce this pattern of the unknown as the xenoid.

The voltage is constant in this type of electricity and in its place it moves repeatedly from 0 to 0, from 0 to 0, then from 0 to 0,

and finally from 0 to 0 again.

The frequency refers to how many times this wave of Xenoidal is repeated by second.

In North America and in other parts of the world, we find electricity of 60 Hz in the current time, which means that the wave of Xenoidal is repeated 60 times per second,

and as each wave has half positive and half negative, this means that its polarity will invert, so 120 times per second.

In the rest of the world we have more electricity of 50 Hz, so the wave of xenoidal is repeated 50 times per second, and therefore the current is inverted 100 times per second.

We also have electricity monofasic and trifasic.

With the monofasic we have a connection to one single phase of a generator, so we have a single wave of xenoidal.

But with the electric wave of xenoidal we have a connection to the three phases.

The fases are bobinas of wire that are placed in the generator at 120 degrees of distance from the previous.

This means that the bobinas experiment the peak of magnetic magnetic giratory in different moments.

This gives us three phases, each one with a different sound of a different light, slightly synchronized from the previous.

Remember that the electricity wants to return to its source in a closed circuit.

As the current flows forward, we can move forward to the front and back in a different moment.

Any excess will flow the neutro back to the source if necessary, and that is only if it is balanced.

With the monofasica we have these large spaces between the picos, but with trifasica, these can be combined to fill the spaces and, therefore, give more energy.

In North America, there is a phase phase divided in residential installations, and these have two cables energetically and one neutro.

This is a monofasic supply that divide by half in the transformer.

We covered this with great detail.

echa un vistazo a esto en los enlaces de abajo

instalamos el vfd en la fuente de alimentación de un motor

de tea normalmente es una fuente trifásica para la mayoría de las aplicaciones voy a colorear estas fases en rojo,

amarillo y azul porque creo que es más fácil de ver pero cada país utiliza un código de color diferente, solo ten en cuenta esto

las tres fases entran en el vfd y se conectan al rectificador el rectificador consiste en múltiples diodos conectados en paralelo

The diodes only allow the electricity to flow in one direction and block your return in the opposite direction.

As the CA is going forward and back, we control the path that can take and this gives us a break of CD in brut.

The electricity of CD in brut.

The second part is the filter of CD.

This is a filter that uses capacitors and inductors to suave the CD rectified in a voltage of CD limp, suave and constant.

The filter is liberating electrons during the intervals to suave the ondulation.

The suave CD is then flowing to the final section, which is the inversor.

The inverter consists of a number of electrical interruptions, known as IGBTs.

These are open and turn in pairs to control the flow of electricity.

Controlando the way that takes electricity and how long it flows in different paths, we can produce electricity from the CD from the source of CD.

Let's see now in detail each part.

We will consider the first part of the VFD, which is the rectificator.

In this part, we have 6 LEDs in parallel.

We call them from 1 to 6 of the following way.

Each of the three phases is connected to a pair of LEDs.

As we know, the electricity needs to return to its source to complete the circuit, so in this configuration, the current will flow through the charge and will return to the source using another phase.

You can do this because the current in each phase is flowing towards the front and back in different moments.

We will see this in detail in a moment.

The charge can be anything, a lamp, a motor or a complete circuit.

In this case, it will only represent the rest of our VFD circuit.

The electricity will be alternated in the phase of supply, but the diode will only leave the phase of the peak and block the other, so I'll show you these.

Let's see this in action.

1. The phase 1 is the first.

This is the first.

It enters and only can flow in one direction, which is through the diode 1.

100

Luego pasa a través de la carga.

101

Una vez que la corriente pasa a través de la carga

102

tendrá que volver a la fuente y como la fase 2 está en la mitad negativa de su ciclo, la corriente fluirá a través del diodo 6 a la fase 2.

103

2. En el siguiente segmento vemos que la corriente sigue fluyendo en la fase 1 y el diodo 1, pero ahora la fase 3 está en su mitad negativa,

104

por lo que la corriente cambia y el flujo vuelve a pasar por esta fase a través del diodo 2.

105

3. In the next segment, the phase 2 is close to its peak, so the current now flows in this phase through the 3.

106

Then, it flows through the charge and returns through the phase 3 through the 2.

107

In the next segment, the current continues flowing in the phase 2 through the 3, but the phase 1 is now in its peak,

108

so the current will flow through the 4 back to the phase 1.

109

5. In the next segment we see that phase 3 is now approaching the positive phase, so that the current flow through this phase through the 5,

110

then flow through the charge and then return through the 4 to the phase 1.

111

6. Finally, the current goes through the phase 3 through the 5, through the 5, and then return to the phase 2 through the 6.

112

This cycle is repeated constantly in this way.

113

The oscilloscope of the tricycle of the tricycle of the charge

114

shows three of the sine of sine of the power to the electrician of the CEA, but the oscilloscope of the charge shows this electrician of direct current in brutto with some of the ondulations.

115

Now we have to suave those rizos to clean the electrician of direct current current.

116

For this, we connect a capacitor between the positive and the negative.

117

This capacitor is like a tank of almacenamiento and absorber the electron

118

when there is an excess and inject the electron when there is a reduction.

119

This will be able to use the electricity of CD in a smooth and agradable signal in the oscilloscope.

120

We have covered the capacitors with great detail.

121

Echale a look at the video in the lower part.

122

Now that we have the CD limp, we are ready to turn it again in CEA control with precision and variable frequency.

123

For why we need an inverter.

124

An inverter is basically a number of IGBTs that are interruptors that can encend and be very quickly.

125

I will illustrate them using simple interruptors instead of IGBTs to make more easy visualizations.

126

I will enumerate these interruptors in the following way.

127

For obtain our three phases, we need to open and close the interruptors in pairs to direct the flow of current to form our supply and return.

128

So, the power connected will experience the alternate current.

129

Remember that the CEA is when the current is inverted.

130

So, if we take a lamp and connect a few interruptors and a source of energy direct energy, we can control the direction of the current current through the lamp,

131

opening and closing the interruptors in the correct order.

132

Therefore, the lamp experiment a alternate current, although it comes from a source of direct current current.

133

For the suministro trifásico we program the interruptor for simulate three phases.

134

Let's see how this cycle works.

135

First, we call 1 and 6.

136

This will make the phase 1 to the phase 2.

137

Then we call 1 and 2.

138

This will make the phase 1 to the phase 3.

139

Then we call 3 and 2.

140

This will make the phase 2 and 3.

141

Then we call 3 and 4.

142

This will make the phase 2 and 1.

143

Luego cerramos los interruptores 5 y 4, esto nos dará la fase 3 y 1.

144

Luego cerramos los interruptores 5 y 6, esto nos dará la fase 3 y 2.

145

Este ciclo se repite una y otra vez así.

146

Si revisamos esto con el osciloscopio, ahora tendremos un patrón de onda que se parece a la CEA, excepto que es un poco cuadrado.

147

This will work well for some applications, but not for all, so how can we improve it?

148

Remember that before in the video I told you

149

that we can open and close the interruptor at different velocities and durations to change the shape of the wave.

150

We can also do that for this.

151

What we do is use the controlador to open and close the interruptors several times per cycle in a pattern of pulsos.

152

Each pulse varies in length.

153

This is known as modulation of length.

154

The cycle is divided in multiple segments smaller.

155

Each segment has a total amount of current that could flow, but when we push the interruptors quickly control the amount of flow that occurs in each segment.

156

This will be as a result a average average current that we see increase and decrease, giving us a pattern of onda.

157

Therefore, the charge will experiment a xenoid.

158

Cuantos más segmentos tengamos más cerca imitará la onda senoidal.

159

Podemos controlar el voltaje de salida controlando cuánto tiempo están cerrados los interruptores,

160

así que podríamos por ejemplo dar salida a 240 o 120 voltios recortando los tiempos de apertura y cierre.

161

Podemos controlar la frecuencia controlando el tiempo de los interruptores, así que podríamos por ejemplo dar salida a 60,

162

50 o 30 Hz, lo que sea necesario para la aplicación.

163

Remember that when we control the frequency, we control the velocity of rotation of the motor.

164

So, back to our VFD circuit, we use the controlador to open and close the interruptors to vary the frequency and the voltage of the output.

165

So, combinando the rectifier, the filter and the inversor, we obtain our frequency variable, which can be used to control the velocity of electric motors

166

and make possible the cost of energy in all types of systems.

167

Well, this is all for this video, but for continuing your learning, see one of our videos on the screen and see you in the next lesson.

168

Don't forget to follow us on Facebook, Twitter, Instagram, LinkedIn, as well as EngineeringMindset.com.

ऐप डाउनलोड करें

धाराप्रवाह बोलने के लिए ज़रूरी सब कुछ

AI उच्चारण स्कोरहर वाक्य का स्कोर

IPA अभ्यासहर ध्वनि में महारत

शब्दावलीअपना शब्द भंडार बनाएँ

शब्द गेमखेलते हुए सीखें

QR स्कैन करें

Download on theApp Store Get it onGoogle Play

FOR YOU

अनुशंसित वीडियो

45 वाक्य

Inside the Relay Controlled SF6 Circuit Breaker: Preventing Arcs and Ensuring Safety

Daily ConversationUniversity StudentsWorking Adults

इस पाठ की शब्दावली और बोलने के सुझाव

यह C1 स्तर का स्पीकिंग पाठ वीडियो “Variador de Frecuencia Explicado - Conceptos Básicos del VFD Inversor de IGBT” पर आधारित है। सबसे ज़्यादा दोहराए गए शब्द ये हैं: current, phase, electricity, flow, interruptor। इस वीडियो में शैडोइंग के लिए 168 वाक्य और 2611 शब्द हैं। बोला गया हिस्सा 14:59 लंबा है। वक्ता लगभग 174 शब्द प्रति मिनट की स्वाभाविक गति से बोलता है, जो रोज़मर्रा की बातचीत के करीब है। केवल 74% शब्द अंग्रेज़ी के 3,000 सबसे आम शब्दों में से हैं, इसलिए शब्दावली कठिन है।

इस वीडियो की मुख्य शब्दावली

वीडियो के 15 सबसे कठिन शब्द, उच्चारण और अर्थ के साथ:

शब्द	उच्चारण	अर्थ
velocity संज्ञा	/vəˈlɑsəti/	वेग
generator संज्ञा	/ˈdʒɛnəɹeɪtə(ɹ)/	जनित्र, जनरेटर
lamp संज्ञा	/ˈlæ̝mp/	चिराग़, लैंप
capacitor संज्ञा	/kəˈpæ.sə.tɚ/	संधारित्र, कंडेनसर
electrician संज्ञा	/ɪˌlɛkˈtɹɪʃən/	बिजलीवाला, बिजली मिस्त्री
oscilloscope संज्ञा	/əˈsɪl.ɪ.skəʊp/	दोलनदर्शी
electron संज्ञा	/ɪˈlɛk.tɹɑn/	विद्युदणु, इलेक्ट्रॉन
voltage संज्ञा	/ˈvəʊltɪd͡ʒ/	विभवांतर, वोल्टता
diode संज्ञा	/ˈdaɪ.oʊd/	डायोड
rotation संज्ञा	/ɹoʊˈteɪʃən/	घूर्णन
refrigeration संज्ञा		प्रशीतन
sine संज्ञा	/saɪn/	ज्या
tricycle संज्ञा	/ˈtɹaɪsɪkəl/	तिपहिया
paragraph संज्ञा	/ˈpæɹəɡɹæf/	अनुच्छेद, पैराग्राफ़
liberate क्रिया	/ˈlɪbəˌɹeɪt/	मुक्त करना, आज़ाद करना

दोहराने लायक वाक्य

वीडियो के छोटे, पूरे वाक्य जिन्हें आप रोज़ की बातचीत में इस्तेमाल कर सकते हैं:

Let's see now in detail each part.
Let's see this in action.
Let's see how this cycle works.

इस वीडियो का व्याकरण

वक्ता जिन संरचनाओं का सबसे अधिक प्रयोग करता है, वीडियो के असली शब्दों के साथ:

संरचना	वीडियो में
Passive voice be + past participle — ज़ोर इस पर कि क्या होता है, न कि कौन करता है	must be trained · have been patrocinated · is connected
Relative clauses who / which + उपवाक्य — व्यक्ति या वस्तु के बारे में अतिरिक्त जानकारी	current, which is · time, which means · section, which is
Present perfect have/has + past participle — बीता हुआ काम जिसका असर अभी भी है	have been patrocinated · have covered

ध्यान देने योग्य उच्चारण

“sh” और “zh” की ध्वनियाँ: electrician /ɪˌlɛkˈtɹɪʃən/, rotation /ɹoʊˈteɪʃən/, interruption /ˌɪntəˈɹʌpʃən/, modulation /ˌmɑd͡ʒəˈleɪʃən/, configuration /kənˌfɪɡ.əˈɹeɪ̯.ʃən/
लंबे शब्द — बलाघात सही रखें: velocity /vəˈlɑsəti/, generator /ˈdʒɛnəɹeɪtə(ɹ)/, capacitor /kəˈpæ.sə.tɚ/, electrician /ɪˌlɛkˈtɹɪʃən/, oscilloscope /əˈsɪl.ɪ.skəʊp/

हिंदी भाषियों के लिए मुश्किल ध्वनियाँ:

/v/ और /w/ का फ़र्क़ — /v/ में ऊपर के दाँत निचले होंठ को छूते हैं, /w/ में होंठ गोल होते हैं: suave /swɑv/, velocity /vəˈlɑsəti/, voltage /ˈvəʊltɪd͡ʒ/, invert /ɪnˈvɜɹt/, inverter /ɪnˈvɝt.ɚ/
शब्द की शुरुआत में s + व्यंजन — पहले “इ” न जोड़ें: suave /swɑv/, sponsor /ˈspɒn.səː/
/æ/ — “ऐ” से ज़्यादा खुला: lamp /ˈlæ̝mp/, capacitor /kəˈpæ.sə.tɚ/, polarity /pəˈlæɹɪti/, paragraph /ˈpæɹəɡɹæf/

इस वीडियो से अभ्यास कैसे करें

पहले बिना बोले पूरा वीडियो एक बार सुनें और जो शब्द नहीं आते उन्हें लिख लें।
0.75× गति से शुरू करें, एक-एक वाक्य की शैडोइंग करें, और सहज लगने पर सामान्य गति पर लौटें।
अपनी आवाज़ रिकॉर्ड करें और मूल से तुलना करें, ख़ासकर velocity, generator, lamp जैसे शब्दों पर ध्यान दें।

शैडोइंग तकनीक क्या है?

शैडोइंग (Shadowing) एक विज्ञान-समर्थित भाषा सीखने की तकनीक है जो मूल रूप से पेशेवर दुभाषिया प्रशिक्षण के लिए विकसित की गई थी। विधि सरल लेकिन शक्तिशाली है: आप मूल अंग्रेज़ी ऑडियो सुनते हैं और तुरंत इसे ज़ोर से दोहराते हैं — जैसे वक्ता की छाया 1-2 सेकंड की देरी से। शोध से पता चलता है कि यह उच्चारण सटीकता, स्वर, लय, जुड़ी हुई ध्वनियाँ, सुनने की समझ और बोलने की प्रवाहशीलता में काफ़ी सुधार करता है।

शैडोइंग तकनीक: पूरी चरण-दर-चरण गाइड पढ़ें →

शैडोइंग अभ्यास: Variador de Frecuencia Explicado - Conceptos Básicos del VFD Inversor de IGBT - वीडियो के साथ अंग्रेजी बोलना सीखें

अभ्यास मोड चुनें

ऐप डाउनलोड करें

How Does Electricity Flow Through a Utility-Scale Solar Site?

Business Partner C1. Unit 1. Video 1.1.1.

How to Scale Analog Values in PLC Programming!

Visa Transaction Processing: Visa Processing Fees and Interchange Rate Basics

What Is Basic Oxygen Furnace - Understanding the basic oxygen process.

Blood Flow Through the Heart (Made Easy in 5 Minutes!)

English Vocabulary for Engineering: Bolts

Cursed Units 2: Curseder Units

3 modern CSS properties to add to your reset

Canadian Electrical Code Introduction and Layout of the Code Book

What is SMT (Surface Mount Technology)? PCB Assembly (Part 1)