Pratica di Shadowing: Variador de Frecuencia Explicado - Conceptos Básicos del VFD Inversor de IGBT - Impara a parlare inglese con i video

Scegli una modalità di pratica

Ogni modalità apre una sala di pratica a schermo intero.

168 frasi

Se le frasi sono troppo corte o troppo lunghe, clicca su Edit per modificarle.

Hello everyone, Paul from EngineeringMindset.com.

In this video we are going to see the VFD, starting with the basic to understand how they work.

Remember that electricity is dangerous and can be fatal.

They must be trained and competent to carry out any electrical work.

If you work in HVAC, then you need to review the inverter's compresors that have been patrocinated this video.

When they use it in combination with the variable speed, like the VFD, that we are covering in the video of today, they make that all your unit HVAC is more efficient,

earning money to you and your clients.

If you want to know more, Danfoss has several capacities in line and stories of cases to consult.

You can find them using the link in the description below.

VFD are the English sign in English of a frequency and they are similar to this.

Also, they could also call the velocity of speed because they use them to control the velocity of a motor of CA.

We find the CAA and VFD used in all industries, especially the HVAC.

For example, we can find the use of the velocity of a compressor in a refrigeration system,

which allows exactly the demand of refrigeration and that result in an important ahorro of energy.

Traditionally, we would have had to use compressors fixed speed that simply open and apagant, resulting in a poor control.

We also found them used to control things like bombs and ventilators in systems of HVAC to allow us to gain energy, improve the energy and control.

The VFD is connected to the electric energy in the motors.

The unit can vary the frequency of electricity

that is used to accionar the motor and we can control the speed of rotation of the motor.

Therefore, we have our frequency variable.

To understand how a VFD works, first we need to understand some basic fundamentals of electricity.

There are two types of electricity and the first one is the CD or the direct current.

This is the most simple type and we get from batteries, panels, solar, etc. You can imagine the CD as a river with a water that flows in one direction.

With the direct current, the electron only flows in a single direction.

I am using the current current current, which is negative to positive, but you may be used to see the conventional current current, which is positive to negative.

The current current current is what really is happening.

The conventional theory was the original theory.

Only we have to take into account the two theories and the one we are using.

For that electricity flow, we need to complete the circuit.

The electricity always tries to return to its source.

When we use a oscilloscope to look at the shape of the electrician for the direct current current, we obtain this plane plane at maximum voltage in the positive region.

If we cut the energy, the line falls to zero.

If we turn and open repeatedly, we obtain a square pattern between zero and maximum.

If we press the interruptor to open and close during different time periods, then we obtain a pulsant pattern.

The other type of electricity is the CA or the alternative.

This type of electricity is the one that will be obtained from your houses and places of work.

With this type of electricity, the electrones inside the copper cable are constantly investing and flow towards the back, towards the back, towards the back,

etc. It can be considered this type of electricity as the sea of the sea that flows between two points maximum, the high and low.

If we follow the copper cables to the generator, the cables are connected to the bobinas that are inside the generator.

In a basic generator we also find an imane in the center that is girly.

The imane has a north and a south, or you can think of it as half positive and half negative.

The electrones of the lamp are charged negatively.

As you know, the imanes push or attract depending on the polarity.

As soon as the iman turns out, the mid-sponsors and negative sides will push and attract the electrones inside the copper copper and also through cables connected.

The magnetic field of the magnetic field varies in intensity.

We can see the magnetic field of magnetic field radiating some of the iron iron iron on the iron.

So as the magnetic field of magnetic field of magnetic field, this will experience a change in the magnetic field of magnetic field from zero to its maximum intensity and then,

as it passes through the magnetic field, will continue to zero.

Then the negative is the electron to the same change of intensity.

Therefore, each of the whole rotation of the imán will produce this pattern of the unknown as the xenoid.

The voltage is constant in this type of electricity and in its place it moves repeatedly from 0 to 0, from 0 to 0, then from 0 to 0,

and finally from 0 to 0 again.

The frequency refers to how many times this wave of Xenoidal is repeated by second.

In North America and in other parts of the world, we find electricity of 60 Hz in the current time, which means that the wave of Xenoidal is repeated 60 times per second,

and as each wave has half positive and half negative, this means that its polarity will invert, so 120 times per second.

In the rest of the world we have more electricity of 50 Hz, so the wave of xenoidal is repeated 50 times per second, and therefore the current is inverted 100 times per second.

We also have electricity monofasic and trifasic.

With the monofasic we have a connection to one single phase of a generator, so we have a single wave of xenoidal.

But with the electric wave of xenoidal we have a connection to the three phases.

The fases are bobinas of wire that are placed in the generator at 120 degrees of distance from the previous.

This means that the bobinas experiment the peak of magnetic magnetic giratory in different moments.

This gives us three phases, each one with a different sound of a different light, slightly synchronized from the previous.

Remember that the electricity wants to return to its source in a closed circuit.

As the current flows forward, we can move forward to the front and back in a different moment.

Any excess will flow the neutro back to the source if necessary, and that is only if it is balanced.

With the monofasica we have these large spaces between the picos, but with trifasica, these can be combined to fill the spaces and, therefore, give more energy.

In North America, there is a phase phase divided in residential installations, and these have two cables energetically and one neutro.

This is a monofasic supply that divide by half in the transformer.

We covered this with great detail.

echa un vistazo a esto en los enlaces de abajo

instalamos el vfd en la fuente de alimentación de un motor

de tea normalmente es una fuente trifásica para la mayoría de las aplicaciones voy a colorear estas fases en rojo,

amarillo y azul porque creo que es más fácil de ver pero cada país utiliza un código de color diferente, solo ten en cuenta esto

las tres fases entran en el vfd y se conectan al rectificador el rectificador consiste en múltiples diodos conectados en paralelo

The diodes only allow the electricity to flow in one direction and block your return in the opposite direction.

As the CA is going forward and back, we control the path that can take and this gives us a break of CD in brut.

The electricity of CD in brut.

The second part is the filter of CD.

This is a filter that uses capacitors and inductors to suave the CD rectified in a voltage of CD limp, suave and constant.

The filter is liberating electrons during the intervals to suave the ondulation.

The suave CD is then flowing to the final section, which is the inversor.

The inverter consists of a number of electrical interruptions, known as IGBTs.

These are open and turn in pairs to control the flow of electricity.

Controlando the way that takes electricity and how long it flows in different paths, we can produce electricity from the CD from the source of CD.

Let's see now in detail each part.

We will consider the first part of the VFD, which is the rectificator.

In this part, we have 6 LEDs in parallel.

We call them from 1 to 6 of the following way.

Each of the three phases is connected to a pair of LEDs.

As we know, the electricity needs to return to its source to complete the circuit, so in this configuration, the current will flow through the charge and will return to the source using another phase.

You can do this because the current in each phase is flowing towards the front and back in different moments.

We will see this in detail in a moment.

The charge can be anything, a lamp, a motor or a complete circuit.

In this case, it will only represent the rest of our VFD circuit.

The electricity will be alternated in the phase of supply, but the diode will only leave the phase of the peak and block the other, so I'll show you these.

Let's see this in action.

1. The phase 1 is the first.

This is the first.

It enters and only can flow in one direction, which is through the diode 1.

100

Luego pasa a través de la carga.

101

Una vez que la corriente pasa a través de la carga

102

tendrá que volver a la fuente y como la fase 2 está en la mitad negativa de su ciclo, la corriente fluirá a través del diodo 6 a la fase 2.

103

2. En el siguiente segmento vemos que la corriente sigue fluyendo en la fase 1 y el diodo 1, pero ahora la fase 3 está en su mitad negativa,

104

por lo que la corriente cambia y el flujo vuelve a pasar por esta fase a través del diodo 2.

105

3. In the next segment, the phase 2 is close to its peak, so the current now flows in this phase through the 3.

106

Then, it flows through the charge and returns through the phase 3 through the 2.

107

In the next segment, the current continues flowing in the phase 2 through the 3, but the phase 1 is now in its peak,

108

so the current will flow through the 4 back to the phase 1.

109

5. In the next segment we see that phase 3 is now approaching the positive phase, so that the current flow through this phase through the 5,

110

then flow through the charge and then return through the 4 to the phase 1.

111

6. Finally, the current goes through the phase 3 through the 5, through the 5, and then return to the phase 2 through the 6.

112

This cycle is repeated constantly in this way.

113

The oscilloscope of the tricycle of the tricycle of the charge

114

shows three of the sine of sine of the power to the electrician of the CEA, but the oscilloscope of the charge shows this electrician of direct current in brutto with some of the ondulations.

115

Now we have to suave those rizos to clean the electrician of direct current current.

116

For this, we connect a capacitor between the positive and the negative.

117

This capacitor is like a tank of almacenamiento and absorber the electron

118

when there is an excess and inject the electron when there is a reduction.

119

This will be able to use the electricity of CD in a smooth and agradable signal in the oscilloscope.

120

We have covered the capacitors with great detail.

121

Echale a look at the video in the lower part.

122

Now that we have the CD limp, we are ready to turn it again in CEA control with precision and variable frequency.

123

For why we need an inverter.

124

An inverter is basically a number of IGBTs that are interruptors that can encend and be very quickly.

125

I will illustrate them using simple interruptors instead of IGBTs to make more easy visualizations.

126

I will enumerate these interruptors in the following way.

127

For obtain our three phases, we need to open and close the interruptors in pairs to direct the flow of current to form our supply and return.

128

So, the power connected will experience the alternate current.

129

Remember that the CEA is when the current is inverted.

130

So, if we take a lamp and connect a few interruptors and a source of energy direct energy, we can control the direction of the current current through the lamp,

131

opening and closing the interruptors in the correct order.

132

Therefore, the lamp experiment a alternate current, although it comes from a source of direct current current.

133

For the suministro trifásico we program the interruptor for simulate three phases.

134

Let's see how this cycle works.

135

First, we call 1 and 6.

136

This will make the phase 1 to the phase 2.

137

Then we call 1 and 2.

138

This will make the phase 1 to the phase 3.

139

Then we call 3 and 2.

140

This will make the phase 2 and 3.

141

Then we call 3 and 4.

142

This will make the phase 2 and 1.

143

Luego cerramos los interruptores 5 y 4, esto nos dará la fase 3 y 1.

144

Luego cerramos los interruptores 5 y 6, esto nos dará la fase 3 y 2.

145

Este ciclo se repite una y otra vez así.

146

Si revisamos esto con el osciloscopio, ahora tendremos un patrón de onda que se parece a la CEA, excepto que es un poco cuadrado.

147

This will work well for some applications, but not for all, so how can we improve it?

148

Remember that before in the video I told you

149

that we can open and close the interruptor at different velocities and durations to change the shape of the wave.

150

We can also do that for this.

151

What we do is use the controlador to open and close the interruptors several times per cycle in a pattern of pulsos.

152

Each pulse varies in length.

153

This is known as modulation of length.

154

The cycle is divided in multiple segments smaller.

155

Each segment has a total amount of current that could flow, but when we push the interruptors quickly control the amount of flow that occurs in each segment.

156

This will be as a result a average average current that we see increase and decrease, giving us a pattern of onda.

157

Therefore, the charge will experiment a xenoid.

158

Cuantos más segmentos tengamos más cerca imitará la onda senoidal.

159

Podemos controlar el voltaje de salida controlando cuánto tiempo están cerrados los interruptores,

160

así que podríamos por ejemplo dar salida a 240 o 120 voltios recortando los tiempos de apertura y cierre.

161

Podemos controlar la frecuencia controlando el tiempo de los interruptores, así que podríamos por ejemplo dar salida a 60,

162

50 o 30 Hz, lo que sea necesario para la aplicación.

163

Remember that when we control the frequency, we control the velocity of rotation of the motor.

164

So, back to our VFD circuit, we use the controlador to open and close the interruptors to vary the frequency and the voltage of the output.

165

So, combinando the rectifier, the filter and the inversor, we obtain our frequency variable, which can be used to control the velocity of electric motors

166

and make possible the cost of energy in all types of systems.

167

Well, this is all for this video, but for continuing your learning, see one of our videos on the screen and see you in the next lesson.

168

Don't forget to follow us on Facebook, Twitter, Instagram, LinkedIn, as well as EngineeringMindset.com.

Scarica l'app

Tutto ciò che serve per parlare fluentemente

Pronuncia con IAVoto per ogni frase

Pratica IPAPadroneggia ogni suono

VocabolarioCostruisci il tuo lessico

Gioco di vocabolarioImpara giocando

Scansiona QR

Download on theApp Store Get it onGoogle Play

FOR YOU

Video consigliato

45 frasi

Inside the Relay Controlled SF6 Circuit Breaker: Preventing Arcs and Ensuring Safety

Daily ConversationUniversity StudentsWorking Adults

Vocabolario e note di pronuncia per questa lezione

Questa lezione di conversazione di livello C1 si basa sul video “Variador de Frecuencia Explicado - Conceptos Básicos del VFD Inversor de IGBT”. Le parole che ritornano più spesso: current, phase, electricity, flow, interruptor. Questo video contiene 168 frasi e 2611 parole da ripetere con lo shadowing. Il parlato dura 14:59. Chi parla ha un ritmo naturale di circa 174 parole al minuto, vicino a una conversazione quotidiana. Solo il 74% delle parole rientra nelle 3.000 più comuni dell’inglese, quindi il lessico è impegnativo.

Vocaboli chiave di questo video

Le 15 parole più avanzate del video, con pronuncia e significato:

Parola	Pronuncia	Significato
suave aggettivo	/swɑv/	soave
velocity sostantivo	/vəˈlɑsəti/	velocità
generator sostantivo	/ˈdʒɛnəɹeɪtə(ɹ)/	generatore
lamp sostantivo	/ˈlæ̝mp/	lampada, lampadina
capacitor sostantivo	/kəˈpæ.sə.tɚ/	condensatore
electrician sostantivo	/ɪˌlɛkˈtɹɪʃən/	elettricista
oscilloscope sostantivo	/əˈsɪl.ɪ.skəʊp/	oscilloscopio
electron sostantivo	/ɪˈlɛk.tɹɑn/	elettrone
voltage sostantivo	/ˈvəʊltɪd͡ʒ/	voltaggio, tensione
diode sostantivo	/ˈdaɪ.oʊd/	diodo
invert verbo	/ɪnˈvɜɹt/	invertire
rotation sostantivo	/ɹoʊˈteɪʃən/	rotazione, giro completo
compressor sostantivo	/kəmˈpɹɛ.sə(ɹ)/	compressore
limp verbo	/lɪmp/	zoppicare
polarity sostantivo	/pəˈlæɹɪti/	polarità

I phrasal verb che sentirai

Parola	Pronuncia	Significato
carry out verbo	/ˈkæ.ɹi aʊt/	compiere, realizzare
go through verbo		attraversare
pass through verbo		trapassare
turn out verbo		risultare

Frasi da ripetere

Frasi brevi e complete del video che puoi riutilizzare nella conversazione di tutti i giorni:

Let's see now in detail each part.
Let's see this in action.
Let's see how this cycle works.

La grammatica di questo video

Le strutture che chi parla usa di più, con le parole esatte del video:

Struttura	Nel video
Forma passiva be + participio passato — conta ciò che accade, non chi lo fa	must be trained · have been patrocinated · is connected
Frasi relative who / which + frase — un’informazione in più su una persona o una cosa	current, which is · time, which means · section, which is
Present perfect have/has + participio passato — un’azione passata che conta ancora adesso	have been patrocinated · have covered

Pronuncia a cui fare attenzione

I suoni “sh” e “zh”: electrician /ɪˌlɛkˈtɹɪʃən/, rotation /ɹoʊˈteɪʃən/, interruption /ˌɪntəˈɹʌpʃən/, modulation /ˌmɑd͡ʒəˈleɪʃən/, configuration /kənˌfɪɡ.əˈɹeɪ̯.ʃən/
Parole lunghe — attenzione all’accento: velocity /vəˈlɑsəti/, generator /ˈdʒɛnəɹeɪtə(ɹ)/, capacitor /kəˈpæ.sə.tɚ/, electrician /ɪˌlɛkˈtɹɪʃən/, oscilloscope /əˈsɪl.ɪ.skəʊp/

I suoni difficili per chi parla italiano:

Consonante finale — senza aggiungere una vocale dopo: suave /swɑv/, lamp /ˈlæ̝mp/, oscilloscope /əˈsɪl.ɪ.skəʊp/, voltage /ˈvəʊltɪd͡ʒ/, diode /ˈdaɪ.oʊd/
/æ/ — più aperta della “e”: lamp /ˈlæ̝mp/, capacitor /kəˈpæ.sə.tɚ/, polarity /pəˈlæɹɪti/, paragraph /ˈpæɹəɡɹæf/

Come esercitarsi con questo video

Ascolta tutto il video una volta senza parlare e annota le parole che non conosci.
Inizia a velocità 0,75×, fai shadowing frase per frase e torna alla velocità normale quando diventa facile.
Registrati e confronta con l’originale, facendo attenzione a parole come suave, velocity, generator.

Cos'è la tecnica dello Shadowing?

Shadowing è una tecnica di apprendimento delle lingue supportata da studi scientifici, originariamente sviluppata per la formazione dei traduttori professionisti e resa popolare dal poliglotta Dr. Alexander Arguelles. Il metodo è semplice ma potente: ascolti un audio in inglese di madrelingua e lo ripeti immediatamente ad alta voce — come un'ombra che segue il parlante con un ritardo di solo 1–2 secondi. A differenza dell'ascolto passivo o degli esercizi di grammatica, lo shadowing costringe il tuo cervello e i muscoli della bocca a elaborare e riprodurre simultaneamente i modelli di discorso reale. La ricerca dimostra che migliora significativamente la precisione della pronuncia, l'intonazione, il ritmo, il discorso connesso, la comprensione dell'ascolto e la fluidità del parlato — rendendolo uno dei metodi più efficaci per la preparazione alla prova di speaking dell'IELTS e per la comunicazione reale in inglese.

Tecnica dello shadowing: leggi la guida completa passo dopo passo →

Pratica di Shadowing: Variador de Frecuencia Explicado - Conceptos Básicos del VFD Inversor de IGBT - Impara a parlare inglese con i video

Scegli una modalità di pratica

Scarica l'app

How Does Electricity Flow Through a Utility-Scale Solar Site?

English Vocabulary for Engineering: Bolts

How to Scale Analog Values in PLC Programming!

Visa Transaction Processing: Visa Processing Fees and Interchange Rate Basics

Blood Flow Through the Heart (Made Easy in 5 Minutes!)

What Is Basic Oxygen Furnace - Understanding the basic oxygen process.

Business Partner C1. Unit 1. Video 1.1.1.

Cursed Units 2: Curseder Units

3 modern CSS properties to add to your reset

Canadian Electrical Code Introduction and Layout of the Code Book

What is SMT (Surface Mount Technology)? PCB Assembly (Part 1)