Luyện nói tiếng Anh bằng Shadowing qua video: Comparing Low Voltage Vs. Medium Voltage Equipment on Solar Sites

Đang tạo bài học...
1
Let's work our way backwards from the interconnection point and compare some equipment.
2
First off, we have our system disconnect, which is almost without exception required by utilities for any distributed generation project, with the possible exception of some small residential projects.
3
For low voltage projects, we typically have a blade disconnect.
4
For utility scale systems, especially overhead connected projects, we'll see what's called a GOAB or gang operated airbrake switch.
5
Next up, we have fuses, which can be a really helpful item to have for blanket protection from the utility, which often has a high available fault current.
6
For low voltage projects, we typically have a fuse disconnect.
7
For utility scale systems, especially overhead connected projects, we might see a set of three fuse cutouts.
8
The next protective device might be a main circuit breaker, which can provide a bit more sensitive protection features than a fuse
9
and could also be connected to a shunt trip circuit to be opened by a remote input.
10
For medium voltage systems, a recloser sort of takes the place of a main circuit breaker, but with a whole lot more bells and whistles.
11
A pole-mounted recloser is separated into two sections, a switching unit at the top of the pole and a control relay, usually mounted at ground level.
12
The relay senses what's happening in the switching unit
13
and tells the switching unit to open or close according to the settings in the relay.
14
Most low-voltage circuit breakers are not set up to trip on voltage or frequency, but this is a standard function of a recloser.
15
In almost every PV system nowadays, you're going to have some kind of revenue metering.
16
In the low-voltage world, this could be a CT cabinet like the one shown here.
17
For overhead medium-voltage systems, you're likely to see a primary metering rack, though a good percentage of projects still meter each subarray at the low-voltage side,
18
either in addition to or instead of at medium voltage.
19
Transformers are not always used in commercial systems, but they're also not totally uncommon either,
20
especially when you encounter a 208 volt service, but you want to use a 480 volt string inverters for rooftop stringing efficiencies.
21
If they're used, they typically are dry type transformers, less than 300 kVA.
22
One of the key differentiators of utility scale projects, in addition to being connected at medium voltage is that they use a step-up transformer,
23
so you'll have one or more of these on every project. And lastly are inverters.
24
While you might see a 120kW Ving inverter like this one here on a commercial project, utility-scale projects sometimes use single inverters that are 2MW or more
25
and are often combined into skids of 4-6MW and paired with a transformer.
26
Fortunately, however, solar modules are still solar modules.
27
Kind of.
28
Thank you.

Từ vựng và ghi chú luyện nói cho bài học này

Video này có 28 câu và 475 từ để luyện shadowing. Phần lời nói dài 2:42. Người nói nói với tốc độ tự nhiên, khoảng 176 từ mỗi phút, gần với hội thoại hằng ngày. Chỉ 71% số từ nằm trong 3.000 từ tiếng Anh thông dụng nhất, nên từ vựng khá khó.

Từ vựng quan trọng trong video

15 từ đáng học trong video, kèm phiên âm và nghĩa:

TừPhiên âmNghĩa
voltage danh từ/ˈvəʊltɪd͡ʒ/điện áp, hiệu điện thế
connect động từ/kəˈnɛkt/nối
string danh từ/stɹɪŋ/chuỗi
exception danh từ/əkˈsɛpʃən/lệ ngoại, ngoại lệ
pole danh từ/pəʊl/cực
meter danh từ/ˈmitəɹ/cái đo, người đo
module danh từ/ˈmɑd͡ʒul/mô-đun, bộ phận rời
percentage danh từ/pə(ɹ)ˈsɛntɪd͡ʒ/số phần trăm, tỷ lệ phần trăm
sensitive tính từ/ˈsɛn.sɪt.ɪv/nhạy cảm
compare động từ/kəmˈpɛɚ/so sánh, so
helpful tính từ/ˈhɛlp.fl̩/hay giúp đỡ
remote tính từ/ɹəˈməʊt̞/xa
frequency danh từ/ˈfɹiːkwənsi/tính thường xuyên
encounter động từ/ɪnˈkaʊntɚ/bắt gặp
blade danh từ/bleɪd/lưỡi

Ngữ pháp trong video

Những cấu trúc người nói dùng nhiều nhất, kèm đúng cụm từ trong video:

Cấu trúcTrong video
Câu bị động be + quá khứ phân từ — nhấn vào việc xảy ra, không phải người làmbe connected · is separated · are not set
Mệnh đề quan hệ who / which + mệnh đề — thêm thông tin về người hoặc vậtdisconnect, which is · fuses, which can · breaker, which can

Phát âm cần chú ý

Người nói dùng 6 dạng rút gọn, ví dụ they're, you're, we'll. Hãy nói theo dạng ngắn đúng như bạn nghe.

  • Âm “sh” và “zh”: exception /əkˈsɛpʃən/, efficiency /ɪˈfɪʃ.ən.si/, residential /ˌrɛzɪˈdɛnʃəl/, differentiator /dɪf.əˈɹɛn.ʃi.eɪ.tə/, interconnection /ˌɪn.tɚ.kəˈnɛk.ʃən/
  • Từ dài — đặt trọng âm cho đúng: utility /juːˈtɪlɪti/, efficiency /ɪˈfɪʃ.ən.si/, residential /ˌrɛzɪˈdɛnʃəl/, fortunately /ˈfɔɹ.t͡ʃə.nɪt.li/, differentiator /dɪf.əˈɹɛn.ʃi.eɪ.tə/

Cách luyện với video này

  1. Nghe hết video một lần, chưa cần nói, và ghi lại những từ bạn chưa biết.
  2. Bắt đầu ở tốc độ 0,75×, nói đuổi từng câu, rồi quay lại tốc độ bình thường khi đã quen.
  3. Ghi âm giọng mình rồi so với bản gốc, chú ý các từ như voltage, connect, string.

Phương Pháp Shadowing Là Gì?

Shadowing là kỹ thuật học ngôn ngữ có cơ sở khoa học, ban đầu được phát triển cho chương trình đào tạo phiên dịch viên chuyên nghiệp và được phổ biến rộng rãi bởi nhà đa ngôn ngữ học Dr. Alexander Arguelles. Nguyên lý cốt lõi đơn giản nhưng cực kỳ hiệu quả: bạn nghe tiếng Anh của người bản xứ và lặp lại to ngay lập tức — như một "cái bóng" (shadow) đuổi theo người nói với độ trễ chỉ 1–2 giây. Khác với luyện ngữ pháp hay học từ vựng bị động, Shadowing buộc não bộ và cơ miệng phải đồng thời xử lý và tái tạo ngôn ngữ thực tế. Các nghiên cứu khoa học xác nhận phương pháp này cải thiện đáng kể phát âm, ngữ điệu, nhịp điệu, nối âm, kỹ năng nghe và độ lưu loát khi nói — đặc biệt hiệu quả cho người luyện IELTS Speaking và muốn giao tiếp tiếng Anh tự nhiên như người bản ngữ.

Phương pháp shadowing: đọc hướng dẫn từng bước đầy đủ →