Luyện nói tiếng Anh bằng Shadowing qua video: CSCS Mock Test 2025 | 50 Questions & Answers

Chọn chế độ luyện tập

Mỗi chế độ mở một phòng luyện tập toàn màn hình.

348 câu
Nếu các câu quá ngắn hoặc quá dài, hãy bấm Edit để chỉnh sửa.
1
Welcome to the 50 Question and Answer 2025 CSCS Mock Test.
2
Visit our website to take the online CSCS Green Card course and start working on site.
3
Let's get started.
4
Question 1.
5
What does the term hazard mean in the context of construction site health and safety?
6
A. A new piece of safety equipment.
7
B. The site accident rate.
8
C. Anything at work that could harm you.
9
D. A temporary barrier used on site.
10
The correct answer is C.
11
Anything at work that could harm you.
12
Question 2.
13
If you hear the fire alarm while you're working on a construction site, where should you go?
14
A. To the site office to check the register.
15
B. To the assembly point.
16
C. To the nearest fire extinguisher point.
17
D. Home as the site is closing down.
18
The correct answer is B.
19
To the assembly point.
20
Question 3.
21
Before you lift a heavy load manually, what preliminary action should you always try to take?
22
A. Stand with your feet together and bend your back.
23
B. Carry the load away from your body at arm's length.
24
C. Lift the load quickly using only one hand.
25
D. Divide large loads into smaller loads or use lifting equipment.
26
The correct answer is D.
27
Divide large loads into smaller loads or use lifting equipment.
28
Question 4.
29
When should you wear safety footwear with protective toe caps and midsoles on a construction site?
30
A. Only when working outside on ground level.
31
B. Only when handling chemicals or wet concrete.
32
C. All the time.
33
D. Only when you're working all day on site and not just visiting.
34
The correct answer is C, all the time.
35
Question 5.
36
What should you do if you find a fire extinguisher has been used or discharged?
37
A, put it back in its place.
38
B, leave it until the next inspection.
39
C, report it so it can be replaced or refilled.
40
D, use another one instead.
41
The correct answer is C, report it so it can be replaced or refilled.
42
Question 6.
43
Why is it important to have good lighting on site?
44
A. It helps spot hazards and prevent accidents.
45
B. It saves time during inspections.
46
C. It makes the site look professional.
47
D. It reduces energy costs.
48
The correct answer is A.
49
It helps spot hazards and prevent accidents.
50
Question 7.
51
What should you do before entering an excavation?
52
A. Check the weather forecast.
53
B. Ensure it's been inspected by a competent person C.
54
Test the soil with your boot D.
55
Enter slowly to test stability The correct answer is B.
56
Ensure it's been inspected by a competent person Question 8 Why should waste materials be separated on site?
57
A. It helps recycling and reduces environmental impact B.
58
It makes disposal faster C.
59
It keeps the skip emptier for longer D.
60
It avoids paying disposal fees The correct answer is A.
61
It helps recycling and reduces environmental impact Question 9.
62
What does a red and white prohibition sign mean?
63
A. You must do something B.
64
It's safe to enter C.
65
Stop or don't do the action shown D.
66
A warning of nearby hazards The correct answer is C.
67
Stop or don't do the action shown Question 10.
68
What is the safest way to work on fragile roofing material?
69
A. Crawl slowly to spread your weight B.
70
Use crawling boards or safety platforms C.
71
Step between joists only D.
72
Use light shoes to reduce pressure The correct answer is B.
73
Use crawling boards or safety platforms Question 11.
74
If a cable reel is hot while in use, what should you do?
75
A. Unplug it and let it cool down B.
76
Pour water over it to cool it faster C.
77
Keep using it until the task is finished D.
78
Move it away from sunlight The correct answer is A.
79
Unplug it and let it cool down Question 12.
80
What type of fire should you use a CO2 extinguisher on?
81
A. Paper and wood fires.
82
B. Gas fires only.
83
C. Electrical or flammable liquid fires.
84
D. Any fire type.
85
The correct answer is C.
86
Electrical or flammable liquid fires.
87
Question 13.
88
What is the main hazard when working in wet conditions with electrical tools?
89
A. Noise interference.
90
B. Electric shock.
91
C. Reduced visibility.
92
D. Faster performance.
93
The correct answer is B.
94
Electric shock.
95
Question 14.
96
What is the purpose of a toolbox talk?
97
A. To discuss daily safety topics and hazards B.
98
To hand out new tools C.
99
To review company profits D.
100
To assign job roles The correct answer is A.
101
To discuss daily safety topics and hazards Question 15 If you feel unwell due to fumes in a confined area, what should you do?
102
A. Take a break in the same area B.
103
Leave immediately and get fresh air C.
104
Wait until symptoms pass D.
105
Sit down and continue working The correct answer is B.
106
Leave immediately and get fresh air Question 16 When should eye protection be worn on site?
107
A. Only during inspections B.
108
Only when using chemicals C.
109
Whenever there's a risk of flying particles or dust D.
110
Only when you feel it's necessary The correct answer is C.
111
Whenever there's a risk of flying particles or dust.
112
Question 17.
113
What should you do if your high visibility vest becomes too dirty to be seen clearly?
114
A. Keep using it until the next shift.
115
B. Wear it inside out.
116
C. Cover it with a jacket.
117
D. Clean or replace it immediately.
118
The correct answer is D.
119
Clean or replace it immediately.
120
Question 18.
121
What does the abbreviation RPE stand for?
122
A. Risk prevention element.
123
B. Respiratory protective equipment.
124
C. Restricted personnel entry.
125
D. Regulated pressure equipment.
126
The correct answer is B.
127
Respiratory protective equipment.
128
Question 19.
129
What should you do if a delivery vehicle arrives unexpectedly?
130
A. Stay clear and inform the supervisor.
131
B. Help unload it quickly.
132
C. Direct it yourself without authorisation.
133
D. Park your tools nearby.
134
The correct answer is A.
135
Stay clear and inform the supervisor.
136
Question 20.
137
What is the safest way to handle chemical containers?
138
A. Pour slowly to reduce splashes.
139
B. Leave lids off to ventilate fumes C.
140
Shake them to mix contents D.
141
Read the label and follow the instructions The correct answer is D.
142
Read the label and follow the instructions Question 21 What should you do
143
if you see scaffolding being altered while people are working on it?
144
A. Warn the workers and report it immediately B.
145
Take a photo for evidence C.
146
Watch to see if it's safe D.
147
Leave the area quietly.
148
The correct answer is A.
149
Warn the workers and report it immediately.
150
Question 22.
151
What should you do if a safety harness shows frayed stitching?
152
A. Cut off the frayed part.
153
B. Continue using it carefully.
154
C. Report it and remove it from use.
155
D. Tape it to prevent further wear.
156
The correct answer is C.
157
Report it and remove it from use Question 23 What is the purpose of a COSHH assessment?
158
A. To record the number of workers exposed to noise B.
159
To assess manual handling tasks C.
160
To identify and control risks from hazardous substances D.
161
To list emergency contact numbers The correct answer is C.
162
To identify and control risks from hazardous substances Question 24 Which of the following best helps reduce manual handling injuries?
163
A. Lifting heavier loads to build strength B.
164
Using lifting aids or asking for help C.
165
Working faster to finish early D.
166
Avoiding breaks during lifting work The correct answer is B.
167
Using lifting aids or asking for help Question 25 Why is regular inspection of PPE important?
168
A. To make sure it's safe and working properly B.
169
To keep records up to date C.
170
To avoid cleaning it often D.
171
To show management you're responsible The correct answer is A.
172
To make sure it's safe and working properly Question 25 5.
173
Why is regular inspection of PPE important?
174
A. To make sure it's safe and working properly.
175
B. To keep records up to date.
176
C. To avoid cleaning it often.
177
D. To show management you're responsible.
178
The correct answer is A.
179
To make sure it's safe and working properly Question 26 What is the safest way to use a ladder on uneven ground?
180
A. Adjust or secure the base before climbing B.
181
Place it on the flattest spot you can find C.
182
Get someone to hold it without securing it D.
183
Step quickly to reduce movement The correct answer is A.
184
Adjust or secure the base before climbing.
185
Question 27.
186
When should you report a near miss?
187
A. Only if someone was almost injured.
188
B. As soon as possible after it happens.
189
C. Only if damage occurred.
190
D. At the end of the week.
191
The correct answer is B.
192
As soon as possible after it happens.
193
Question 28.
194
What is the safest way to reduce dust when cutting materials?
195
A. Cut indoors to reduce wind.
196
B. Wet materials before cutting.
197
C. Wear thick gloves only.
198
D. Sweep the dust away afterwards.
199
The correct answer is B.
200
Wet materials before cutting.
201
Question 29.
202
Why should electrical tools have a valid test label?
203
A. It proves the tool has been safety checked.
204
B. It identifies who owns the tool C.
205
It helps track usage for warranty purposes D.
206
It shows which team uses it The correct answer is A.
207
It proves the tool has been safety checked Question 30.
208
What should you do if you notice a damaged extension lead on site?
209
A. Tape it up and continue using it B.
210
Report it and remove it from service C.
211
Use it for short jobs only D.
212
Keep it for backup use The correct answer is B.
213
Report it and remove it from service Question 31 What is the main reason safety signs are displayed on site?
214
A. To decorate the work area B.
215
To remind workers of safe practices and hazards C.
216
To identify the company working there D.
217
To warn the public to stay away The correct answer is B, to remind workers of safe practices and hazards.
218
Question 32.
219
What should you do if you find a power tool with a damaged cable?
220
A, wrap tape around the damaged area and continue.
221
B, report it and remove it from use immediately.
222
C, use it only for short periods.
223
D, move it out of sight.
224
The correct answer is B, report it and remove it from use immediately.
225
Question 33.
226
Why is it important to wash your hands before eating or drinking on site?
227
A. To prevent transferring harmful substances into your body.
228
B. To comply with hygiene inspections.
229
C. To stop your gloves getting dirty.
230
D. To cool down your hands.
231
The correct answer is A.
232
To prevent transferring harmful substances into your body.
233
Question 34.
234
What is the main risk when working near a moving crane?
235
A. Losing tools nearby B.
236
Noise from the crane engine C.
237
Falling objects from the load or crane D.
238
The ground becoming uneven The correct answer is C.
239
Falling objects from the load or crane Question 35 Why should tools be kept clean and in good condition?
240
A. To make them look new for inspections B.
241
To meet insurance requirements C.
242
To prevent injury and ensure they work correctly D.
243
To make them easier to sell later.
244
The correct answer is C.
245
To prevent injury and ensure they work correctly.
246
Question 36.
247
What should you do if a fire exit is blocked by materials?
248
A. Wait until the next break to tell someone.
249
B. Ignore it if another exit is available.
250
C. Step over the obstruction if needed.
251
D. Move the materials or report it immediately.
252
the correct answer is d move the materials
253
or report it immediately question 37 what is the main purpose
254
of a safety data sheet a to describe the safe use storage
255
and handling of a substance b to identify expiry dates of
256
all substances c to record delivery dates d to provide pricing details for materials
257
the correct answer is a to describe the safe use storage
258
and handling of a substance question 38 what is the correct action
259
if you discover a co -worker working without proper ppe a give them your ppe to use b remind them
260
and report it if they continue c ignore it if they're experienced d stop working until they leave
261
The correct answer is B.
262
Remind them and report it if they continue.
263
Question 39.
264
Why is horseplay or practical joking unsafe on site?
265
A. It helps build team morale.
266
B. It can distract others and cause accidents.
267
C. It is acceptable during breaks.
268
D. It only affects productivity, not safety.
269
The correct answer is B.
270
It can distract others and cause accidents accidents.
271
Question 40.
272
What should you do if a co -worker collapses and is not breathing?
273
A. Move them to a quiet area.
274
B. Call for help and start CPR if trained.
275
C. Wait for them to recover.
276
D. Give them water to drink.
277
The correct answer is B.
278
Call for help and start CPR if trained.
279
Question 41.
280
When should waste materials be cleared from work areas?
281
A. At the end of the project.
282
B. When the skip is full.
283
C. Once a week.
284
D. As work progresses to prevent slips and trips.
285
The correct answer is D.
286
As work progresses to prevent slips and trips.
287
Question 42.
288
Why should ladders be secured or footed before use?
289
A. To prevent slipping or movement while climbing.
290
B. To make them easier to climb.
291
C. To stop them from rusting D.
292
To reduce inspection time The correct answer is A.
293
To prevent slipping or movement while climbing Question 43.
294
What is the safest way to store heavy materials on site?
295
A. Stack them as high as possible to save space B.
296
Keep them on a flat, stable surface C.
297
Leave them near site entrances for easy access D.
298
Store them in walkways for convenience The correct answer is B.
299
Keep them on a flat, stable surface Question 44 What is the first action you should take if you find an unconscious person on sight?
300
A. Check for danger before approaching them B.
301
Move them into the recovery position immediately C.
302
Pour water on them to wake them up D.
303
Shout for help but do not approach The correct answer is A.
304
Check for danger before approaching them Question 45.
305
Why should you never use damaged PPE?
306
A. It is harder to clean B.
307
It looks unprofessional C.
308
It can slow down work D.
309
It may not provide full protection The correct answer is D.
310
It may not provide full protection Question 46.
311
What is the purpose of a method statement?
312
A. To explain how specific tasks will be carried out safely B.
313
To record attendance on site C.
314
To list materials being used D.
315
To show daily site costs The correct answer is A.
316
To explain how specific tasks will be carried out safely Question 47 Why should you never remove safety guards from equipment?
317
A. It may make the tool harder to use B.
318
It could expose moving parts and cause injury C.
319
It slows down productivity D.
320
It is against company policy only.
321
The correct answer is B.
322
It could expose moving parts and cause injury.
323
Question 48.
324
What should you do if your supervisor asks you to do a task you're not trained for?
325
A. Attempt it carefully to learn.
326
B. Refuse and explain you need proper training first.
327
C. Ask a colleague to do it for you.
328
D. Try it under supervision without training.
329
The correct answer is B.
330
Refuse and explain you need proper training first.
331
Question 49.
332
Why is good housekeeping important on a construction site?
333
A. It reduces risks like trips, slips and falling objects.
334
B. It impresses clients visiting the site.
335
C. It helps workers find tools faster.
336
D. It makes inspections easier.
337
The correct answer is A.
338
It reduces risks like trips, slips and falling objects.
339
Question 50.
340
What should you do before using lifting equipment such as a hoist or sling?
341
A. Check that it's been inspected and certified.
342
B. Use it to lift a small load first as a test.
343
C. Ask another worker if it looks safe.
344
D. Assume it's fine if it was used yesterday.
345
The correct answer is A.
346
Check that it's been inspected and certified.
347
Thanks for joining us for this CSCS mock test.
348
When you're ready to take the next step, head over to wartraining .co .uk and start your level 1 health and safety course to get your green card.

Tải Ứng Dụng

Mọi thứ bạn cần để nói trôi chảy

Chấm điểm AIChấm từng câu nói
Luyện IPAThành thạo mọi âm
Từ vựngMở rộng vốn từ
Game Từ vựngHọc qua chơi

Từ vựng và ghi chú luyện nói cho bài học này

Bài luyện nói trình độ B1 này dựa trên video “CSCS Mock Test 2025”. Những từ được nhắc lại nhiều nhất trong bài: correct, answer, site, safety, tool. Video này có 348 câu và 2717 từ để luyện shadowing. Phần lời nói dài 19:51. Người nói giữ tốc độ đều, khoảng 137 từ mỗi phút, vừa sức để nói đuổi theo. Chỉ 75% số từ nằm trong 3.000 từ tiếng Anh thông dụng nhất, nên từ vựng khá khó.

Từ vựng quan trọng trong video

15 từ khó nhất trong video, kèm phiên âm và nghĩa:

TừPhiên âmNghĩa
inspection danh từ/ɪnˈspɛkʃən/sự kiểm tra
substance danh từ/ˈsʌbstəns/vật chất
slip động từ/ˈslɪp/trượt
climb động từ/ˈklaɪ̯m/leo, lên
inspect động từ/ɪnˈspɛkt/kiểm tra
crane danh từ/kɹeɪn/sếu, hạc
supervisor danh từ/ˈsupɚˌvaɪzɚ/người giám sát
warn động từ/woɹn/cảnh báo
recycle động từ/ɹəˈsaɪkəl/tái chế
glove danh từ/ɡlʌv/găng tay, bao tay
particle danh từ/ˈpɑɹtək(ə)l/hạt
ladder danh từ/ˈlæd.ɚ/thang
instruction danh từ/ɪnˈstɹʌkʃən/hướng dẫn
inform động từ/ɪnˈfɔɹm/thông báo
abbreviation danh từ/əˌbɹi.viˈeɪ.ʃn̩/sự tóm tắt, sự rút ngắn

Cụm động từ bạn sẽ nghe

TừPhiên âmNghĩa
close down động từ/kləʊzˈdaʊn/đóng cửa
sit down động từngồi xuống, ngồi

Những câu đáng luyện lại

Các câu ngắn, trọn ý trong video mà bạn có thể dùng lại khi giao tiếp hằng ngày:

  • What should you do before entering an excavation?
  • What should you do if a delivery vehicle arrives unexpectedly?
  • What should you do if a safety harness shows frayed stitching?
  • To show management you're responsible.
  • When should you report a near miss?

Ngữ pháp trong video

Những cấu trúc người nói dùng nhiều nhất, kèm đúng cụm từ trong video:

Cấu trúcTrong video
Câu bị động be + quá khứ phân từ — nhấn vào việc xảy ra, không phải người làmcan be replaced · been inspected · is finished
Thì hiện tại hoàn thành have/has + quá khứ phân từ — việc đã xảy ra nhưng còn liên quan đến hiện tạihas been · it's been inspected
Lời khuyên với “should” should + động từ — nói điều nên làmshould you go · should you always try · should you wear
So sánh nhất the -est / the most … — mức cao nhất hoặc thấp nhất trong một nhómthe nearest · the safest · the flattest

Phát âm cần chú ý

Người nói dùng 9 dạng rút gọn, ví dụ you're, don't, they're. Hãy nói theo dạng ngắn đúng như bạn nghe.

  • Âm “th”: authorization /ˌɔːθəɹaɪˈzeɪʃən/, breathe /bɹiːð/
  • Âm “sh” và “zh”: inspection /ɪnˈspɛkʃən/, extinguisher /ɪkˈstɪŋɡwɪʃə(ɹ)/, instruction /ɪnˈstɹʌkʃən/, abbreviation /əˌbɹi.viˈeɪ.ʃn̩/, excavation /ˌɛkskəˈveɪʃn/
  • Từ dài — đặt trọng âm cho đúng: extinguisher /ɪkˈstɪŋɡwɪʃə(ɹ)/, supervisor /ˈsupɚˌvaɪzɚ/, visibility /ˌvɪz.əˈbɪl.ɪ.ti/, productivity /ˌpɹɒdʌkˈtɪvəti/, abbreviation /əˌbɹi.viˈeɪ.ʃn̩/

Những âm người Việt thường gặp khó:

  • Cụm phụ âm cuối — đọc đủ từng âm, đừng nuốt âm cuối: substance /ˈsʌbstəns/, inspect /ɪnˈspɛkt/, warn /woɹn/, distract /dɪˈstɹækt/, competent /ˈkɒmpətənt/
  • Âm /tʃ/, /dʒ/ và /ʒ/ — tiếng Việt không có, đừng đọc thành “ch” hay “gi”: stitch /stɪt͡ʃ/, hygiene /ˈhaɪˌd͡ʒiːn/, fragile /ˈfɹæd͡ʒəl/, discharge /dɪsˈtʃɑɹdʒ/, supervision /ˌs(j)uːpəˈvɪʒən/
  • Âm /æ/ — mở miệng rộng hơn âm “e”: hazard /ˈhæzəd/, flammable /ˈflæməbl̩/, hazardous /ˈhæ.zɚ.dɪs/, distract /dɪˈstɹækt/, ladder /ˈlæd.ɚ/

Cách luyện với video này

  1. Nghe hết video một lần, chưa cần nói, và ghi lại những từ bạn chưa biết.
  2. Nói đuổi từng câu ở tốc độ bình thường, lặp lại mỗi câu đến khi nhịp của bạn khớp với người nói.
  3. Ghi âm giọng mình rồi so với bản gốc, chú ý các từ như inspection, substance, slip.

Phương Pháp Shadowing Là Gì?

Shadowing là kỹ thuật học ngôn ngữ có cơ sở khoa học, ban đầu được phát triển cho chương trình đào tạo phiên dịch viên chuyên nghiệp và được phổ biến rộng rãi bởi nhà đa ngôn ngữ học Dr. Alexander Arguelles. Nguyên lý cốt lõi đơn giản nhưng cực kỳ hiệu quả: bạn nghe tiếng Anh của người bản xứ và lặp lại to ngay lập tức — như một "cái bóng" (shadow) đuổi theo người nói với độ trễ chỉ 1–2 giây. Khác với luyện ngữ pháp hay học từ vựng bị động, Shadowing buộc não bộ và cơ miệng phải đồng thời xử lý và tái tạo ngôn ngữ thực tế. Các nghiên cứu khoa học xác nhận phương pháp này cải thiện đáng kể phát âm, ngữ điệu, nhịp điệu, nối âm, kỹ năng nghe và độ lưu loát khi nói — đặc biệt hiệu quả cho người luyện IELTS Speaking và muốn giao tiếp tiếng Anh tự nhiên như người bản ngữ.

Phương pháp shadowing: đọc hướng dẫn từng bước đầy đủ →