Shadowing-Übung: APQP Phase 5 - Feedback, assessment & corrective action phase - Englisch Sprechen Lernen mit Video
Übungsmodus wählen
Jeder Modus öffnet einen Übungsraum im Vollbild.
102 Sätze
Wenn Sätze zu kurz oder zu lang sind, klicke auf Edit, um sie anzupassen.
1
Welcome to Young Business Professionals.
2
I'm Felix and I hope you are all fine today.
3
We are taking a look now on APQP Phase 5, the Feedback Assessment and Corrective Actions Phase.
4
This is already the fifth video of our APQP Playlist.
5
This video will take you on a 10-minute tour through this
6
project phase make sure you're watching it until the end as
7
we are releasing important lessons learned of phase 5 at the end of the video
8
if you are interested in increasing your automotive knowledge please feel free to subscribe to my channel
9
and like the video you may also check out our facebook page through
10
which we would like to create a community that that sure support each other, growing everybody's know-how.
11
What is the content of APQP Phase 5, Feedback Assessment and Corrective Actions Phase?
12
Within my phase diagram, you may recognize that APQP Phase 5 is running in parallel to all the other phases,
13
as feedback is being collected throughout all project phases,
14
so it can be evaluated permanently and possibilities for improvements can be implemented as well well during the project.
15
But of course we will focus now on the working packages
16
that are located after the product sampling from timing point of view.
17
Phase 5 might be divided into the following working packages.
18
Approval for serial production of customer, monitoring of production ramp up,
19
monitoring of production results and monitoring of customer satisfaction as well as a handover to the production team,
20
a lessons learned session and the quality gate review phase 5.
21
Approval of serial production of the customer.
22
I guess you remember that at the end of phase 4, the product sampling documentation according to PPAP or EMPP standard,
23
together with initial samples has been provided to the customer.
24
This documentation is available for the customer in order to get checked by them.
25
According to customers availability, but as well as previous customer involvement
26
and ppap scope
27
that may take in between two to six weeks of time ideally the customers approving documentation as soon as possible
28
so the start of production can be passed theoretically product is now fulfilling all requirements
29
and can be produced according to the installed
30
and approved process in case deviations have been identified the customer may issue a limited or conditional approval,
31
alternatively deny the approval completely.
32
In general, the decision is depending on the scope of these deviations.
33
In case there is no functional relevance, a limited approval can be given, but in case the product is not working as defined originally, the approval might be denied.
34
In both of the cases, the supplier is requested to define measures and an updated timing to improve the deviations.
35
High temperature is a common fact as there is not that much time remaining until the previously agreed SOP date.
36
Monitoring of ramp-up, production results and customer satisfaction.
37
I was summarizing these three working packages as they are basically pretty similar to each other.
38
We are still in the handover phase of the responsibility from project team to serial production team.
39
Project team is still available and supported.
40
Now it's time to check if the production is ramping up as initially planned.
41
Is the customer ordering promised volumes?
42
It is important to check that as the calculated profit is of course depending a lot on production volume.
43
In case the volume is too low, price adjustments or negotiations towards the customer should be checked or initiated.
44
Moreover, it is important to understand if all logistic requirements and processes are running as defined.
45
Is the customer providing the call-offs as defined with regard to timing and quantity?
46
Are empty goods available in sufficient quantity?
47
Is the production plant able to supply the customer in time?
48
In addition, special attention should be on achieving planned cycle times and if they could be improved already.
49
Also the scrap rate should be monitored in detail.
50
In case there are bigger quality issues, your project team may still offer extraordinary support to solve the problems quickly.
51
All these mentioned points also have an impact on customer satisfaction.
52
In general, the customer satisfaction should be monitored carefully.
53
Are products supplied in the right time and in the right quality to the customer?
54
Is the communication in between the production plant and the customer plant established
55
and working well in case all these points are running well
56
responsibility might be handed over step by step hand over to
57
production team as already mentioned the project team is acting mainly in a supporting supporting and monitoring manner
58
the target is to hand over the responsibility to the serial production team as soon as possible
59
but also in a way in
60
which the serial production team has enough time to be trained and accommodated with the new production equipment.
61
It is important that this handover is managed properly.
62
It does not make sense at all to shirk off the
63
responsibility to the next team without providing the chance to learn and study important things that need to be considered.
64
On the other hand, it is beneficial
65
to manage that handover as soon as possible to enable a project team to focus on new projects
66
or rfqs it makes sense to fix the handover process protocols
67
that are keeping record about all points that have been trained hand it over
68
and so on at the end both parties are signing these protocols.
69
Lessons learned.
70
Before the project is being closed officially, it is of importance to reflect appeared difficulties.
71
As already mentioned at the beginning of the presentation, this phase is overlapping all other phases.
72
The purpose of this detail is to make clear that difficulties
73
and mistakes should be watched during the whole project in order to improve them already during the project itself.
74
alternatively to fix them for the next project latest.
75
It makes sense to note all acute issues in a presentation
76
and to review them with all team members so everybody can understand them and provide its feedback.
77
This will make sure that the whole team has the chance to learn and avoid the same issues for the next project.
78
Of course, focus should be given also on positive results achieved.
79
Quality gate phase 5.
80
Once all these activities are done, the project manager has the pleasure to present the progress of
81
that process phase to the management and top management of the company.
82
In this phase of the project, the quality gate phase 5 might be used as well in order to close the project completely.
83
In case there is still actions unfulfilled, this is the right time and place for the manager to escalate
84
that to the management and to ask for special attention and support of the management team.
85
In such a case, the management team may of course also decide to not release the phase accordingly, but to end the project.
86
Anyhow, in case they release the phase, the project is ending.
87
It is important to perform a proper closing process,
88
so all involved resources can be released and focus on new activities afterwards.
89
Alternatively, it may happen that sole team members are still acting in projects that should have been closed already.
90
Let me summarize some important points of project phase 5 now.
91
It is important to train the production team as detailed as possible, so they have a chance to understand the new product and production process according to all requirements.
92
The project team is available to perform these efforts.
93
The handover phase or process should be performed thoroughly and should be fixed on paper,
94
so all project team members can be released and focus on new challenges.
95
In order to improve in short, mid and long term, it is required to reflect issues and failures permanently.
96
Take care that a lessons learned session is installed at the end of the project at least.
97
That was my short video about APQB Phase 5.
98
Thanks to all of you for watching this video until the end.
99
I hope you enjoyed it.
100
I'm looking forward for your likes and your feedback below the video.
101
subscribe to the channel to not miss further apqp videos please
102
feel free to join our facebook community you will find the link below the video have a great day
App herunterladen
Alles, was du zum fließenden Sprechen brauchst
KI-AussprachebewertungJeder Satz bewertet
IPA-TrainingJeden Laut meistern
WortschatzBaue deinen Wortschatz auf
VokabelspielSpielend lernen
Gleicher Kanal
C1What is a Run@Rate? Meaning of a Run@Rate!
Business EnglishUniversity StudentsWorking Adults
C1What is APQP Phase 0 - RFQ Phase ?
Business EnglishWorking Adults
C1APQP Phase 4 - Product & Process validation phase
Business EnglishUniversity StudentsWorking Adults
C1Meaning of DVP&R and PVP&R - What is a DVP + What is a PVP?
Business EnglishUniversity StudentsWorking Adults
C1Control Plan - What is a Control Plan?
Business EnglishUniversity StudentsWorking Adults
C1APQP Phase 3 - Process development phase
Business EnglishWorking Adults
C1APQP Phase 2 - Product Development
Business EnglishUniversity StudentsWorking Adults
C1APQP Phase 1 - Project planning
Business EnglishUniversity StudentsWorking Adults
C1What is APQP - Advanced Product Quality Planning?
Business EnglishUniversity StudentsWorking Adults
FOR YOU
Empfohlenes Video
B2422
28 Sätze
Weekly Team Meeting: Project Status Update
American AccentBusiness EnglishWorking Adults
C11
29 Sätze
VMM I O-INSPECT I Curve
Business EnglishWorking Adults
C11
443 Sätze
Functional-Oriented Documentation in Automation - Eplan & IEC 81346 Explained
Business EnglishWorking Adults
C17
60 Sätze
What is SMT (Surface Mount Technology)? PCB Assembly (Part 2)
Business EnglishWorking Adults
C11
182 Sätze
How to organize and present your design explorations for feedback
Business EnglishWorking Adults
C1240 Sätze
PMBOK 8th Edition Practice Questions 1 - 10 - Pass your PMP and Learn the PMBOK Guide
Business EnglishWorking Adults
C11
119 Sätze
Basic Opt Flw regimes
Business EnglishWorking Adults
B25
48 Sätze
Understanding the Quality Department tasks and structure: Supplier Quality Engineer (6/9)
Business EnglishWorking Adults
C1288 Sätze
Using Selection & Scan Processing tools for reverse engineering | Geomagic Design X
Business EnglishWorking Adults
C13
93 Sätze
NPI Process 1: Why A Pilot Run Before Mass Production Is Very Useful
Business EnglishWorking Adults
C11
70 Sätze
Ricardo Vargas Shows How to Implement Governance During Project Execution
Business EnglishWorking Adults
Wortschatz und Sprechhinweise zu dieser Lektion
Diese Sprechübung auf Niveau C1 basiert auf dem Video „APQP Phase 5 - Feedback, assessment & corrective action phase“. Diese Wörter kommen am häufigsten vor: phase, project, customer, production, handover. Dieses Video enthält 102 Sätze und 1378 Wörter zum Nachsprechen. Der gesprochene Teil dauert 9:32. Der Sprecher spricht gleichmäßig mit etwa 145 Wörtern pro Minute – ein angenehmes Tempo fürs Shadowing. 87 % der Wörter gehören zu den 3.000 häufigsten im Englischen; den Rest solltest du dir vor dem Üben ansehen.
Wichtiger Wortschatz in diesem Video
Die 15 anspruchsvollsten Wörter aus dem Video, mit Aussprache und Bedeutung:
| Wort | Aussprache | Bedeutung |
|---|---|---|
| handover Substantiv | /ˈhændˌoʊvɚ/ | Übergabe |
| deviation Substantiv | /ˌdiː.viˈeɪʃən/ | Abweichung, Abweichen |
| alternatively Adverb | /ɔlˈtɝ.nə.tɪv.li/ | alternativ, andernfalls |
| summarize Verb | /ˈsʌməˌɹaɪz/ | zusammenfassen |
| subscribe Verb | /səbˈskɹaɪb/ | abonnieren |
| quantity Substantiv | /ˈkwɑn(t)ɪti/ | Quantität, Menge |
| permanently Adverb | /ˈpɜː.mə.nənt.li/ | permanent, ständig |
| approve Verb | /əˈpɹuːv/ | billigen, genehmigen |
| anyhow Adverb | /ˈɛn.i.haʊ/ | irgendwie |
| escalate Verb | /ˈɛs.kə.leɪt/ | eskalieren, steigern |
| unfulfilled Adjektiv | unausgeführt, unerfüllt | |
| conditional Substantiv | /kənˈdɪʃ.ə.nəl/ | Konditional, Konditionalis |
| theoretically Adverb | theoretisch, prinzipiell | |
| overlap Verb | /ˌəʊvəˈlæp/ | überlappen, überlagern |
| initiate Verb | /ɪˈnɪʃ.i.eɪt/ | beginnen |
Phrasal Verbs, die du hören wirst
| Wort | Bedeutung |
|---|---|
| hand over Verb | übergeben, überreichen |
| check out Verb | überprüfen |
Grammatik in diesem Video
Die Strukturen, die der Sprecher am häufigsten verwendet, mit den genauen Worten aus dem Video:
| Struktur | Im Video |
|---|---|
| Passiv be + Partizip Perfekt – wichtig ist, was geschieht, nicht wer es tut | being collected · can be evaluated · are located |
| Present Perfect have/has + Partizip Perfekt – eine vergangene Handlung, die jetzt noch wichtig ist | has been provided · have been identified · have been trained |
Aussprache, auf die du achten solltest
Der Sprecher verwendet 3 Kurzformen und abgeschwächte Formen, zum Beispiel I'm, you're. Sprich sie in der kurzen Form, so wie du sie hörst.
- Die Laute „sh“ und „zh“: deviation /ˌdiː.viˈeɪʃən/, documentation /ˌdɑkjəmɛnˈteɪʃən/, conditional /kənˈdɪʃ.ə.nəl/, initiate /ɪˈnɪʃ.i.eɪt/, negotiation /nɪˌɡəʊ.ʃiˈeɪ.ʃən/
- Lange Wörter – auf die Betonung achten: deviation /ˌdiː.viˈeɪʃən/, alternatively /ɔlˈtɝ.nə.tɪv.li/, documentation /ˌdɑkjəmɛnˈteɪʃən/, permanently /ˈpɜː.mə.nənt.li/, conditional /kənˈdɪʃ.ə.nəl/
So übst du mit diesem Video
- Höre dir das ganze Video einmal an, ohne zu sprechen, und notiere die Wörter, die du nicht kennst.
- Sprich Satz für Satz in normaler Geschwindigkeit nach und wiederhole jeden, bis dein Rhythmus zum Sprecher passt.
- Nimm dich auf und vergleiche mit dem Original; achte dabei auf Wörter wie handover, deviation, alternatively.
Was ist die Shadowing-Technik?
Shadowing ist eine wissenschaftlich fundierte Sprachlerntechnik, die ursprünglich für die professionelle Dolmetscherausbildung entwickelt und durch den Polyglotten Dr. Alexander Arguelles populär gemacht wurde. Die Methode ist einfach aber wirkungsvoll: Du hörst englisches Audio von Muttersprachlern und wiederholst es sofort laut — wie ein Schatten, der dem Sprecher mit nur 1–2 Sekunden Verzögerung folgt. Anders als passives Hören oder Grammatikübungen zwingt Shadowing dein Gehirn und deine Mundmuskulatur, gleichzeitig echte Sprachmuster zu verarbeiten und zu reproduzieren. Studien zeigen, dass es Aussprachegenauigkeit, Intonation, Rhythmus, verbundene Sprache, Hörverständnis und Sprechflüssigkeit signifikant verbessert — was es zu einer der effektivsten Methoden für die IELTS Speaking-Vorbereitung und reale englische Kommunikation macht.