Shadowing Practice: APQP Phase 5 - Feedback, assessment & corrective action phase - Learn English Speaking with Video
Kies een oefenmodus
Elke modus opent een volledig scherm oefenruimte.
102 zinnen
Als zinnen te kort of te lang zijn, klik op Bewerken om ze aan te passen.
1
Welcome to Young Business Professionals.
2
I'm Felix and I hope you are all fine today.
3
We are taking a look now on APQP Phase 5, the Feedback Assessment and Corrective Actions Phase.
4
This is already the fifth video of our APQP Playlist.
5
This video will take you on a 10-minute tour through this
6
project phase make sure you're watching it until the end as
7
we are releasing important lessons learned of phase 5 at the end of the video
8
if you are interested in increasing your automotive knowledge please feel free to subscribe to my channel
9
and like the video you may also check out our facebook page through
10
which we would like to create a community that that sure support each other, growing everybody's know-how.
11
What is the content of APQP Phase 5, Feedback Assessment and Corrective Actions Phase?
12
Within my phase diagram, you may recognize that APQP Phase 5 is running in parallel to all the other phases,
13
as feedback is being collected throughout all project phases,
14
so it can be evaluated permanently and possibilities for improvements can be implemented as well well during the project.
15
But of course we will focus now on the working packages
16
that are located after the product sampling from timing point of view.
17
Phase 5 might be divided into the following working packages.
18
Approval for serial production of customer, monitoring of production ramp up,
19
monitoring of production results and monitoring of customer satisfaction as well as a handover to the production team,
20
a lessons learned session and the quality gate review phase 5.
21
Approval of serial production of the customer.
22
I guess you remember that at the end of phase 4, the product sampling documentation according to PPAP or EMPP standard,
23
together with initial samples has been provided to the customer.
24
This documentation is available for the customer in order to get checked by them.
25
According to customers availability, but as well as previous customer involvement
26
and ppap scope
27
that may take in between two to six weeks of time ideally the customers approving documentation as soon as possible
28
so the start of production can be passed theoretically product is now fulfilling all requirements
29
and can be produced according to the installed
30
and approved process in case deviations have been identified the customer may issue a limited or conditional approval,
31
alternatively deny the approval completely.
32
In general, the decision is depending on the scope of these deviations.
33
In case there is no functional relevance, a limited approval can be given, but in case the product is not working as defined originally, the approval might be denied.
34
In both of the cases, the supplier is requested to define measures and an updated timing to improve the deviations.
35
High temperature is a common fact as there is not that much time remaining until the previously agreed SOP date.
36
Monitoring of ramp-up, production results and customer satisfaction.
37
I was summarizing these three working packages as they are basically pretty similar to each other.
38
We are still in the handover phase of the responsibility from project team to serial production team.
39
Project team is still available and supported.
40
Now it's time to check if the production is ramping up as initially planned.
41
Is the customer ordering promised volumes?
42
It is important to check that as the calculated profit is of course depending a lot on production volume.
43
In case the volume is too low, price adjustments or negotiations towards the customer should be checked or initiated.
44
Moreover, it is important to understand if all logistic requirements and processes are running as defined.
45
Is the customer providing the call-offs as defined with regard to timing and quantity?
46
Are empty goods available in sufficient quantity?
47
Is the production plant able to supply the customer in time?
48
In addition, special attention should be on achieving planned cycle times and if they could be improved already.
49
Also the scrap rate should be monitored in detail.
50
In case there are bigger quality issues, your project team may still offer extraordinary support to solve the problems quickly.
51
All these mentioned points also have an impact on customer satisfaction.
52
In general, the customer satisfaction should be monitored carefully.
53
Are products supplied in the right time and in the right quality to the customer?
54
Is the communication in between the production plant and the customer plant established
55
and working well in case all these points are running well
56
responsibility might be handed over step by step hand over to
57
production team as already mentioned the project team is acting mainly in a supporting supporting and monitoring manner
58
the target is to hand over the responsibility to the serial production team as soon as possible
59
but also in a way in
60
which the serial production team has enough time to be trained and accommodated with the new production equipment.
61
It is important that this handover is managed properly.
62
It does not make sense at all to shirk off the
63
responsibility to the next team without providing the chance to learn and study important things that need to be considered.
64
On the other hand, it is beneficial
65
to manage that handover as soon as possible to enable a project team to focus on new projects
66
or rfqs it makes sense to fix the handover process protocols
67
that are keeping record about all points that have been trained hand it over
68
and so on at the end both parties are signing these protocols.
69
Lessons learned.
70
Before the project is being closed officially, it is of importance to reflect appeared difficulties.
71
As already mentioned at the beginning of the presentation, this phase is overlapping all other phases.
72
The purpose of this detail is to make clear that difficulties
73
and mistakes should be watched during the whole project in order to improve them already during the project itself.
74
alternatively to fix them for the next project latest.
75
It makes sense to note all acute issues in a presentation
76
and to review them with all team members so everybody can understand them and provide its feedback.
77
This will make sure that the whole team has the chance to learn and avoid the same issues for the next project.
78
Of course, focus should be given also on positive results achieved.
79
Quality gate phase 5.
80
Once all these activities are done, the project manager has the pleasure to present the progress of
81
that process phase to the management and top management of the company.
82
In this phase of the project, the quality gate phase 5 might be used as well in order to close the project completely.
83
In case there is still actions unfulfilled, this is the right time and place for the manager to escalate
84
that to the management and to ask for special attention and support of the management team.
85
In such a case, the management team may of course also decide to not release the phase accordingly, but to end the project.
86
Anyhow, in case they release the phase, the project is ending.
87
It is important to perform a proper closing process,
88
so all involved resources can be released and focus on new activities afterwards.
89
Alternatively, it may happen that sole team members are still acting in projects that should have been closed already.
90
Let me summarize some important points of project phase 5 now.
91
It is important to train the production team as detailed as possible, so they have a chance to understand the new product and production process according to all requirements.
92
The project team is available to perform these efforts.
93
The handover phase or process should be performed thoroughly and should be fixed on paper,
94
so all project team members can be released and focus on new challenges.
95
In order to improve in short, mid and long term, it is required to reflect issues and failures permanently.
96
Take care that a lessons learned session is installed at the end of the project at least.
97
That was my short video about APQB Phase 5.
98
Thanks to all of you for watching this video until the end.
99
I hope you enjoyed it.
100
I'm looking forward for your likes and your feedback below the video.
101
subscribe to the channel to not miss further apqp videos please
102
feel free to join our facebook community you will find the link below the video have a great day
App downloaden
Alles wat je nodig hebt om vloeiend te spreken
AI UitspraakScoor elke zin
IPA OefeningBeheers elk geluid
WoordenschatBouw je woordenschat op
WoordenspelLeren terwijl je speelt
Zelfde Kanaal
C1What is a Run@Rate? Meaning of a Run@Rate!
Business EnglishUniversity StudentsWorking Adults
C1What is APQP Phase 0 - RFQ Phase ?
Business EnglishWorking Adults
C1APQP Phase 4 - Product & Process validation phase
Business EnglishUniversity StudentsWorking Adults
C1Meaning of DVP&R and PVP&R - What is a DVP + What is a PVP?
Business EnglishUniversity StudentsWorking Adults
C1Control Plan - What is a Control Plan?
Business EnglishUniversity StudentsWorking Adults
C1APQP Phase 3 - Process development phase
Business EnglishWorking Adults
C1APQP Phase 2 - Product Development
Business EnglishUniversity StudentsWorking Adults
C1APQP Phase 1 - Project planning
Business EnglishUniversity StudentsWorking Adults
C1What is APQP - Advanced Product Quality Planning?
Business EnglishUniversity StudentsWorking Adults
FOR YOU
Aanbevolen Video
B2423
28 zinnen
Weekly Team Meeting: Project Status Update
American AccentBusiness EnglishWorking Adults
C11
29 zinnen
VMM I O-INSPECT I Curve
Business EnglishWorking Adults
C11
443 zinnen
Functional-Oriented Documentation in Automation - Eplan & IEC 81346 Explained
Business EnglishWorking Adults
C17
60 zinnen
What is SMT (Surface Mount Technology)? PCB Assembly (Part 2)
Business EnglishWorking Adults
C11
182 zinnen
How to organize and present your design explorations for feedback
Business EnglishWorking Adults
C1240 zinnen
PMBOK 8th Edition Practice Questions 1 - 10 - Pass your PMP and Learn the PMBOK Guide
Business EnglishWorking Adults
C11
119 zinnen
Basic Opt Flw regimes
Business EnglishWorking Adults
B25
48 zinnen
Understanding the Quality Department tasks and structure: Supplier Quality Engineer (6/9)
Business EnglishWorking Adults
C1288 zinnen
Using Selection & Scan Processing tools for reverse engineering | Geomagic Design X
Business EnglishWorking Adults
C13
93 zinnen
NPI Process 1: Why A Pilot Run Before Mass Production Is Very Useful
Business EnglishWorking Adults
C11
70 zinnen
Ricardo Vargas Shows How to Implement Governance During Project Execution
Business EnglishWorking Adults
Woordenschat en spreektips bij deze les
Deze spreekles op niveau C1 is gebaseerd op de video “APQP Phase 5 - Feedback, assessment & corrective action phase”. Deze woorden komen het vaakst terug: phase, project, customer, production, handover. Deze video bevat 102 zinnen en 1378 woorden om na te spreken. Het gesproken deel duurt 9:32. De spreker praat in een gelijkmatig tempo van ongeveer 145 woorden per minuut, prettig om te shadowen. 87% van de woorden hoort bij de 3.000 meest gebruikte Engelse woorden; de rest kun je beter vooraf bekijken.
Belangrijke woorden in deze video
De 15 moeilijkste woorden uit de video, met uitspraak en betekenis:
| Woord | Uitspraak | Betekenis |
|---|---|---|
| deviation zelfstandig naamwoord | /ˌdiː.viˈeɪʃən/ | afwijken |
| summarize werkwoord | /ˈsʌməˌɹaɪz/ | samenvatten, opsommen |
| subscribe werkwoord | /səbˈskɹaɪb/ | abonneren |
| quantity zelfstandig naamwoord | /ˈkwɑn(t)ɪti/ | hoeveelheid, kwantiteit |
| approve werkwoord | /əˈpɹuːv/ | goedkeuren |
| anyhow bijwoord | /ˈɛn.i.haʊ/ | hoe dan ook, in ieder geval |
| escalate werkwoord | /ˈɛs.kə.leɪt/ | escaleren |
| logistic bijvoeglijk naamwoord | /ləˈd͡ʒɪs.tɪk/ | logistisch |
| conditional zelfstandig naamwoord | /kənˈdɪʃ.ə.nəl/ | voorwaardelijke wijs |
| theoretically bijwoord | theoretisch | |
| overlap werkwoord | /ˌəʊvəˈlæp/ | bedekken |
| initiate werkwoord | /ɪˈnɪʃ.i.eɪt/ | beginnen, starten |
| relevance zelfstandig naamwoord | /ˈɹɛl.ɪ.vən(t)s/ | relevantie |
| negotiation zelfstandig naamwoord | /nɪˌɡəʊ.ʃiˈeɪ.ʃən/ | onderhandeling |
| supplier zelfstandig naamwoord | /səˈplaɪə/ | leverancier |
Phrasal verbs die je zult horen
| Woord | Betekenis |
|---|---|
| hand over werkwoord | overhandigen |
| check out werkwoord | onderzoeken |
Grammatica in deze video
De structuren die de spreker het meest gebruikt, met de exacte woorden uit de video:
| Structuur | In de video |
|---|---|
| Lijdende vorm be + voltooid deelwoord — het gaat om wat er gebeurt, niet om wie het doet | being collected · can be evaluated · are located |
| Present perfect have/has + voltooid deelwoord — iets uit het verleden dat nu nog telt | has been provided · have been identified · have been trained |
Uitspraak om op te letten
De spreker gebruikt 3 samentrekkingen en verkorte vormen, zoals I'm, you're. Spreek ze kort uit, zoals je ze hoort.
- De klanken “sh” en “zh”: deviation /ˌdiː.viˈeɪʃən/, documentation /ˌdɑkjəmɛnˈteɪʃən/, conditional /kənˈdɪʃ.ə.nəl/, initiate /ɪˈnɪʃ.i.eɪt/, negotiation /nɪˌɡəʊ.ʃiˈeɪ.ʃən/
- Lange woorden — let op de klemtoon: deviation /ˌdiː.viˈeɪʃən/, alternatively /ɔlˈtɝ.nə.tɪv.li/, documentation /ˌdɑkjəmɛnˈteɪʃən/, permanently /ˈpɜː.mə.nənt.li/, conditional /kənˈdɪʃ.ə.nəl/
Zo oefen je met deze video
- Luister de hele video één keer zonder te spreken en noteer de woorden die je niet kent.
- Spreek zin voor zin na op normale snelheid en herhaal elke zin tot je ritme gelijk is aan dat van de spreker.
- Neem jezelf op en vergelijk met het origineel; let daarbij op woorden als deviation, summarize, subscribe.
Wat is de Shadowing-techniek?
Shadowing is een wetenschappelijk onderbouwde taalleermethode die oorspronkelijk is ontwikkeld voor professionele tolkentraining en gepopulariseerd door polyglot Dr. Alexander Arguelles. De methode is eenvoudig maar krachtig: je luistert naar native Engelse audio en herhaalt het onmiddellijk hardop — als een schaduw die de spreker volgt met slechts 1–2 seconden vertraging. In tegenstelling tot passief luisteren of grammaticadrills, dwingt shadowing je hersenen en mondspieren om echte spraakpatronen tegelijkertijd te verwerken en te reproduceren. Onderzoek toont aan dat het de uitspraaknauwkeurigheid, intonatie, ritme, verbonden spraak, luisterbegrip en spreekvaardigheid aanzienlijk verbetert — waardoor het een van de meest effectieve methoden is voor IELTS Speaking-voorbereiding en echte Engelse communicatie.