Практика Shadowing: APQP Phase 5 - Feedback, assessment & corrective action phase - Изучайте разговорный английский по видео

Выберите режим практики

Каждый режим открывает полноэкранную комнату практики.

102 предложений

Если предложения слишком короткие или длинные, нажмите Edit, чтобы их изменить.

Welcome to Young Business Professionals.

I'm Felix and I hope you are all fine today.

We are taking a look now on APQP Phase 5, the Feedback Assessment and Corrective Actions Phase.

This is already the fifth video of our APQP Playlist.

This video will take you on a 10-minute tour through this

project phase make sure you're watching it until the end as

we are releasing important lessons learned of phase 5 at the end of the video

if you are interested in increasing your automotive knowledge please feel free to subscribe to my channel

and like the video you may also check out our facebook page through

which we would like to create a community that that sure support each other, growing everybody's know-how.

What is the content of APQP Phase 5, Feedback Assessment and Corrective Actions Phase?

Within my phase diagram, you may recognize that APQP Phase 5 is running in parallel to all the other phases,

as feedback is being collected throughout all project phases,

so it can be evaluated permanently and possibilities for improvements can be implemented as well well during the project.

But of course we will focus now on the working packages

that are located after the product sampling from timing point of view.

Phase 5 might be divided into the following working packages.

Approval for serial production of customer, monitoring of production ramp up,

monitoring of production results and monitoring of customer satisfaction as well as a handover to the production team,

a lessons learned session and the quality gate review phase 5.

Approval of serial production of the customer.

I guess you remember that at the end of phase 4, the product sampling documentation according to PPAP or EMPP standard,

together with initial samples has been provided to the customer.

This documentation is available for the customer in order to get checked by them.

According to customers availability, but as well as previous customer involvement

and ppap scope

that may take in between two to six weeks of time ideally the customers approving documentation as soon as possible

so the start of production can be passed theoretically product is now fulfilling all requirements

and can be produced according to the installed

and approved process in case deviations have been identified the customer may issue a limited or conditional approval,

alternatively deny the approval completely.

In general, the decision is depending on the scope of these deviations.

In case there is no functional relevance, a limited approval can be given, but in case the product is not working as defined originally, the approval might be denied.

In both of the cases, the supplier is requested to define measures and an updated timing to improve the deviations.

High temperature is a common fact as there is not that much time remaining until the previously agreed SOP date.

Monitoring of ramp-up, production results and customer satisfaction.

I was summarizing these three working packages as they are basically pretty similar to each other.

We are still in the handover phase of the responsibility from project team to serial production team.

Project team is still available and supported.

Now it's time to check if the production is ramping up as initially planned.

Is the customer ordering promised volumes?

It is important to check that as the calculated profit is of course depending a lot on production volume.

In case the volume is too low, price adjustments or negotiations towards the customer should be checked or initiated.

Moreover, it is important to understand if all logistic requirements and processes are running as defined.

Is the customer providing the call-offs as defined with regard to timing and quantity?

Are empty goods available in sufficient quantity?

Is the production plant able to supply the customer in time?

In addition, special attention should be on achieving planned cycle times and if they could be improved already.

Also the scrap rate should be monitored in detail.

In case there are bigger quality issues, your project team may still offer extraordinary support to solve the problems quickly.

All these mentioned points also have an impact on customer satisfaction.

In general, the customer satisfaction should be monitored carefully.

Are products supplied in the right time and in the right quality to the customer?

Is the communication in between the production plant and the customer plant established

and working well in case all these points are running well

responsibility might be handed over step by step hand over to

production team as already mentioned the project team is acting mainly in a supporting supporting and monitoring manner

the target is to hand over the responsibility to the serial production team as soon as possible

but also in a way in

which the serial production team has enough time to be trained and accommodated with the new production equipment.

It is important that this handover is managed properly.

It does not make sense at all to shirk off the

responsibility to the next team without providing the chance to learn and study important things that need to be considered.

On the other hand, it is beneficial

to manage that handover as soon as possible to enable a project team to focus on new projects

or rfqs it makes sense to fix the handover process protocols

that are keeping record about all points that have been trained hand it over

and so on at the end both parties are signing these protocols.

Lessons learned.

Before the project is being closed officially, it is of importance to reflect appeared difficulties.

As already mentioned at the beginning of the presentation, this phase is overlapping all other phases.

The purpose of this detail is to make clear that difficulties

and mistakes should be watched during the whole project in order to improve them already during the project itself.

alternatively to fix them for the next project latest.

It makes sense to note all acute issues in a presentation

and to review them with all team members so everybody can understand them and provide its feedback.

This will make sure that the whole team has the chance to learn and avoid the same issues for the next project.

Of course, focus should be given also on positive results achieved.

Quality gate phase 5.

Once all these activities are done, the project manager has the pleasure to present the progress of

that process phase to the management and top management of the company.

In this phase of the project, the quality gate phase 5 might be used as well in order to close the project completely.

In case there is still actions unfulfilled, this is the right time and place for the manager to escalate

that to the management and to ask for special attention and support of the management team.

In such a case, the management team may of course also decide to not release the phase accordingly, but to end the project.

Anyhow, in case they release the phase, the project is ending.

It is important to perform a proper closing process,

so all involved resources can be released and focus on new activities afterwards.

Alternatively, it may happen that sole team members are still acting in projects that should have been closed already.

Let me summarize some important points of project phase 5 now.

It is important to train the production team as detailed as possible, so they have a chance to understand the new product and production process according to all requirements.

The project team is available to perform these efforts.

The handover phase or process should be performed thoroughly and should be fixed on paper,

so all project team members can be released and focus on new challenges.

In order to improve in short, mid and long term, it is required to reflect issues and failures permanently.

Take care that a lessons learned session is installed at the end of the project at least.

That was my short video about APQB Phase 5.

Thanks to all of you for watching this video until the end.

I hope you enjoyed it.

100

I'm looking forward for your likes and your feedback below the video.

101

subscribe to the channel to not miss further apqp videos please

102

feel free to join our facebook community you will find the link below the video have a great day

Скачать приложение

Всё для свободной речи

ИИ-оценка произношенияОценка каждой фразы

Практика IPAОсвойте каждый звук

СловарьСоберите свой словарный запас

Игра со словамиУчитесь играя

Сканировать QR

Download on theApp Store Get it onGoogle Play

Тот же канал

FOR YOU

Лексика и советы по произношению к этому уроку

Этот урок разговорной практики уровня C1 построен на видео «APQP Phase 5 - Feedback, assessment & corrective action phase». Чаще всего повторяются слова: phase, project, customer, production, handover. В этом видео 102 предложений и 1378 слов для шедоуинга. Речь длится 9:32. Говорящий держит ровный темп — около 145 слов в минуту, удобный для шедоуинга. 87% слов входят в 3000 самых частых слов английского языка; остальные стоит разобрать перед занятием.

Ключевая лексика этого видео

Самые сложные слова из видео (15), с произношением и значением:

Слово	Произношение	Значение
handover существительное	/ˈhændˌoʊvɚ/	переда́ча
deviation существительное	/ˌdiː.viˈeɪʃən/	отклоне́ние
summarize глагол	/ˈsʌməˌɹaɪz/	обобща́ть, обобщи́ть
subscribe глагол	/səbˈskɹaɪb/	подпи́сывать, подписа́ть
quantity существительное	/ˈkwɑn(t)ɪti/	коли́чество
approve глагол	/əˈpɹuːv/	утвержда́ть, утверди́ть
anyhow наречие	/ˈɛn.i.haʊ/	так и́ли ина́че
escalate глагол	/ˈɛs.kə.leɪt/	обостря́ть, углубля́ть
unfulfilled прилагательное		невы́полненный
conditional существительное	/kənˈdɪʃ.ə.nəl/	условное наклоне́ние
theoretically наречие		теорети́чески
overlap глагол	/ˌəʊvəˈlæp/	накрыва́ть, перекрыва́ть
initiate глагол	/ɪˈnɪʃ.i.eɪt/	инициировать
relevance существительное	/ˈɹɛl.ɪ.vən(t)s/	актуа́льность, уме́стность
negotiation существительное	/nɪˌɡəʊ.ʃiˈeɪ.ʃən/	перегово́ры

Фразовые глаголы, которые вы услышите

Слово	Значение
hand over глагол	передава́ть, переда́ть
check out глагол	проверя́ть, прове́рить

Грамматика в этом видео

Конструкции, которые говорящий использует чаще всего, с точными словами из видео:

Конструкция	В видео
Пассивный залог be + причастие прошедшего времени — важно, что происходит, а не кто это делает	being collected · can be evaluated · are located
Present Perfect have/has + причастие прошедшего времени — прошлое действие, важное сейчас	has been provided · have been identified · have been trained

Произношение, на которое стоит обратить внимание

Говорящий использует 3 сокращённых и редуцированных форм, например I'm, you're. Произносите их коротко, так, как слышите.

Звуки «sh» и «zh»: deviation /ˌdiː.viˈeɪʃən/, documentation /ˌdɑkjəmɛnˈteɪʃən/, conditional /kənˈdɪʃ.ə.nəl/, initiate /ɪˈnɪʃ.i.eɪt/, negotiation /nɪˌɡəʊ.ʃiˈeɪ.ʃən/
Длинные слова — следите за ударением: deviation /ˌdiː.viˈeɪʃən/, alternatively /ɔlˈtɝ.nə.tɪv.li/, documentation /ˌdɑkjəmɛnˈteɪʃən/, permanently /ˈpɜː.mə.nənt.li/, conditional /kənˈdɪʃ.ə.nəl/

Как заниматься с этим видео

Прослушайте всё видео один раз молча и выпишите незнакомые слова.
Повторяйте предложение за предложением на обычной скорости, пока ваш ритм не совпадёт с ритмом говорящего.
Запишите себя и сравните с оригиналом, обращая внимание на такие слова, как handover, deviation, summarize.

Что такое техника Shadowing?

Shadowing — это научно обоснованная техника изучения языка, изначально разработанная для подготовки профессиональных переводчиков и популяризированная полиглотом доктором Александром Аргуэльесом. Метод прост, но эффективен: вы слушаете аудио на английском от носителей языка и немедленно повторяете вслух — как тень, следующая за говорящим с задержкой в 1–2 секунды. В отличие от пассивного прослушивания или грамматических упражнений, Shadowing заставляет мозг и мышцы рта одновременно обрабатывать и воспроизводить реальные речевые паттерны. Исследования показывают, что это значительно улучшает точность произношения, интонацию, ритм, связную речь, понимание на слух и беглость речи — что делает его одним из самых эффективных методов для подготовки к IELTS Speaking и реального общения на английском.

Техника шедоуинга: читать полное пошаговое руководство →

Практика Shadowing: APQP Phase 5 - Feedback, assessment & corrective action phase - Изучайте разговорный английский по видео

Выберите режим практики

Скачать приложение

Тот же канал

What is a Run@Rate? Meaning of a Run@Rate!

What is APQP Phase 0 - RFQ Phase ?

APQP Phase 4 - Product & Process validation phase

Meaning of DVP&R and PVP&R - What is a DVP + What is a PVP?

Control Plan - What is a Control Plan?

APQP Phase 3 - Process development phase

APQP Phase 2 - Product Development

APQP Phase 1 - Project planning

What is APQP - Advanced Product Quality Planning?

Рекомендуемое видео

Weekly Team Meeting: Project Status Update

VMM I O-INSPECT I Curve

Functional-Oriented Documentation in Automation - Eplan & IEC 81346 Explained

What is SMT (Surface Mount Technology)? PCB Assembly (Part 2)

How to organize and present your design explorations for feedback

PMBOK 8th Edition Practice Questions 1 - 10 - Pass your PMP and Learn the PMBOK Guide

Basic Opt Flw regimes

Understanding the Quality Department tasks and structure: Supplier Quality Engineer (6/9)

Using Selection & Scan Processing tools for reverse engineering | Geomagic Design X

NPI Process 1: Why A Pilot Run Before Mass Production Is Very Useful

Ricardo Vargas Shows How to Implement Governance During Project Execution