Практика Shadowing: Control Plan - What is a Control Plan? - Изучайте разговорный английский по видео

Выберите режим практики

Каждый режим открывает полноэкранную комнату практики.

82 предложений

Если предложения слишком короткие или длинные, нажмите Edit, чтобы их изменить.

Welcome to Young Business Professionals.

I'm Felix and this is another video of our automotive know-how video series.

I will give you an introduction into a so-called control plan.

If you are interested in increasing your automotive knowledge, please feel free to subscribe to my channel and like the video video.

You may also check out our Facebook page through

which we would like to create a community that shall support each other growing everybody's knowledge.

Well now let me introduce control plans to you.

A control plan is making sure

that the production process of a product is running under controllable

or manageable circumstances so products without failures respectively products according to customer requirements can be produced.

It is a tool defined by the IETF 6949 standard, but was also mentioned already within QS 9000.

It defines important product and process characteristics of a product

or a product group and specifies how these characteristics have to be monitored.

The control plan is also part of the AP QP process and is touched the first time in phase two,

alternatively phase three of the project

if a control plan for prototypes is being made already then it's touched already in phase two

but latest you start to use it to be for pre-serial

components respectively in phase three i have created this chart in

order to explain a little bit more in detail how a process plan looks like,

which inputs he's using, what you can do with that tool and what should be the result of using it.

Within a control plan, you're listing the production process of the product,

starting from raw materials entering your plant until the finished goods leaving your plant.

This is already described in a process flowchart, so the information from the flowchart can be carried over to the control plan.

Each process may influence specific characteristics of the products that will be listed in the control plan as well.

These characteristics might be special characteristics requested by a customer

but it might be also usual dimensional characteristics specified on the drawing of the product

or it might be information derived from the product and process FMEA.

Once these characteristics are all listed in the control plan, a test method per characteristic is defined in order to make sure that it will be checked.

You are also defining a checking frequency in the plan

and actions that have to be initiated once the characteristics cannot be fulfilled.

So then, during the production of the product,

this plan is controlling that all these defined requirements will be kept and in case one of them is not kept,

a specific action is derived that will either make sure

that the requirements will be fulfilled after some rework action or similar or the product is exiting the process.

On this way, the control plan makes sure that just products according to defined requirements may leave the company.

In order to increase your understanding, I have also listed here a number of information that are typically part of a control plan,

such as the date of creation or the change of the control plan or change level of the control plan,

customer information, such as the customer part number or similar, the supplier description and location,

so the production plan of the producing company,

the part number and part description of the supplier, the engineering change level of the component itself.

That is important because once you perform an engineering change to the product

or to the process you need to also revise the control

plan accordingly the level of the control plan is it used for prototypes is it used for pre-serial production

or for serial production needs to be marked supplier contact information

should be available so the customer can get in touch with somebody that can answer some questions on that control plan

then there should be a process step description based on the process flow chart

in the best case also the numbers of the pros process flow chart are carried over to the process

steps in the control plan.

In addition, special characteristics are included in the control plan and they are marked exclusively.

Also, the specification of characteristics have to be defined in the control plan,

such, for example, like tolerances of a dimension

and also the number of the equipment of the relevant process step in

which a dimension might be influenced should be mentioned as well as general test methods

and evaluation techniques should be listed in control plans it's important to add also the test equipment

and the corresponding test method with which a

characteristic within its specification has to be tested

and also a frequency means the number of the tests to be performed per shift

or per day or per week and needs to be defined

and also the corresponding control method and very important once there is a deviation detected on one of the dimensions for instance,

a reaction needs to be derived and so behind each of these

items that have to be controlled also a reaction plan needs to be added.

In case you got all these points already on your control plan format, you can be sure that you are on a pretty good level.

What else is important with regard to control plans?

You should always be aware about the fact that a control plan is a living file.

It is always required to keep it up to date and it never reaches a final level, except the product is going out of production.

Once a drawing, a FMEA or the process flow changes, it is important to also update the control plan accordingly.

And another important fact that I need to mention is the accord,

the accordance of drawings or of the drawing FMEA and control plan with regard to special characteristics.

This is a must-have.

What does that mean?

In case there are special characteristics for a product, they must be marked and highlighted in drawing, FMEA and control plan.

This is making sure that these important characteristics are monitored with a high focus

and the product can never be failing with regard to these.

So, that's it.

I hope you got a rough introduction into control plans.

We will follow up with further videos handling automotive process topics.

I hope you enjoyed this video.

In case you did, I'm looking forward for your likes and your feedback below the video.

Please subscribe to the channel to not miss further updates.

Please feel free to join also our Facebook community.

You may find the link below the video.

Have a great day!

Скачать приложение

Всё для свободной речи

ИИ-оценка произношенияОценка каждой фразы

Практика IPAОсвойте каждый звук

СловарьСоберите свой словарный запас

Игра со словамиУчитесь играя

Сканировать QR

Download on theApp Store Get it onGoogle Play

Тот же канал

FOR YOU

Лексика и советы по произношению к этому уроку

Этот урок разговорной практики уровня C1 построен на видео «Control Plan - What is a Control Plan?». Чаще всего повторяются слова: product, process, characteristic, production, defined. В этом видео 82 предложений и 1115 слов для шедоуинга. Речь длится 8:15. Говорящий держит ровный темп — около 135 слов в минуту, удобный для шедоуинга. 86% слов входят в 3000 самых частых слов английского языка; остальные стоит разобрать перед занятием.

Ключевая лексика этого видео

Самые сложные слова из видео (15), с произношением и значением:

Слово	Произношение	Значение
characteristic существительное	/ˌkæɹ(ə)ktəˈɹɪstɪk/	характе́рная черта́, отличи́тельная черта́
supplier существительное	/səˈplaɪə/	поставщи́к, поставщи́ца
automotive прилагательное	/ˌɔtəˈmoʊtɪv/	самохо́дный
dimension существительное	/daɪˈmɛn.ʃən/	аспе́кт
correspond глагол	/ˌkoɹəˈspɑnd/	соотве́тствовать, согласо́вываться
specification существительное		специфика́ция
prototype существительное	/ˈpɹəʊtətaɪp/	прототи́п, моде́ль
fulfill глагол	/fʊlˈfɪl/	исполня́ть, испо́лнить
subscribe глагол	/səbˈskɹaɪb/	подпи́сывать, подписа́ть
accordingly наречие	/əˈkɔɹ.dɪŋ.li/	соотве́тственно
controllable прилагательное	/kənˈtɹoʊləbəl/	управля́емый, контроли́руемый
deviation существительное	/ˌdiː.viˈeɪʃən/	отклоне́ние
revise глагол	/ɹɪˈvaɪz/	пересма́тривать, пересмотре́ть
circumstance существительное	/ˈsɝ.kəmˌstæns/	обстоя́тельство, усло́вие
initiate глагол	/ɪˈnɪʃ.i.eɪt/	инициировать

Фразовые глаголы, которые вы услышите

Слово	Значение
check out глагол	проверя́ть, прове́рить

Грамматика в этом видео

Конструкции, которые говорящий использует чаще всего, с точными словами из видео:

Конструкция	В видео
Пассивный залог be + причастие прошедшего времени — важно, что происходит, а не кто это делает	can be produced · was also mentioned · be monitored
Present Perfect have/has + причастие прошедшего времени — прошлое действие, важное сейчас	have created · have also listed

Произношение, на которое стоит обратить внимание

Говорящий использует 3 сокращённых и редуцированных форм, например I'm, you're. Произносите их коротко, так, как слышите.

Звуки «sh» и «zh»: dimension /daɪˈmɛn.ʃən/, deviation /ˌdiː.viˈeɪʃən/, initiate /ɪˈnɪʃ.i.eɪt/, dimensional /daɪˈmɛn.ʃə.nəl/
Длинные слова — следите за ударением: characteristic /ˌkæɹ(ə)ktəˈɹɪstɪk/, automotive /ˌɔtəˈmoʊtɪv/, accordingly /əˈkɔɹ.dɪŋ.li/, controllable /kənˈtɹoʊləbəl/, deviation /ˌdiː.viˈeɪʃən/

Звуки, трудные для русскоязычных:

Звонкие согласные в конце слова — не оглушайте их: derive /dɪˈɹaɪv/, automotive /ˌɔtəˈmoʊtɪv/, correspond /ˌkoɹəˈspɑnd/, subscribe /səbˈskɹaɪb/, revise /ɹɪˈvaɪz/

Как заниматься с этим видео

Прослушайте всё видео один раз молча и выпишите незнакомые слова.
Повторяйте предложение за предложением на обычной скорости, пока ваш ритм не совпадёт с ритмом говорящего.
Запишите себя и сравните с оригиналом, обращая внимание на такие слова, как characteristic, supplier, automotive.

Что такое техника Shadowing?

Shadowing — это научно обоснованная техника изучения языка, изначально разработанная для подготовки профессиональных переводчиков и популяризированная полиглотом доктором Александром Аргуэльесом. Метод прост, но эффективен: вы слушаете аудио на английском от носителей языка и немедленно повторяете вслух — как тень, следующая за говорящим с задержкой в 1–2 секунды. В отличие от пассивного прослушивания или грамматических упражнений, Shadowing заставляет мозг и мышцы рта одновременно обрабатывать и воспроизводить реальные речевые паттерны. Исследования показывают, что это значительно улучшает точность произношения, интонацию, ритм, связную речь, понимание на слух и беглость речи — что делает его одним из самых эффективных методов для подготовки к IELTS Speaking и реального общения на английском.

Техника шедоуинга: читать полное пошаговое руководство →

Практика Shadowing: Control Plan - What is a Control Plan? - Изучайте разговорный английский по видео

Выберите режим практики

Скачать приложение

Тот же канал

What is a Run@Rate? Meaning of a Run@Rate!

What is APQP Phase 0 - RFQ Phase ?

APQP Phase 5 - Feedback, assessment & corrective action phase

APQP Phase 4 - Product & Process validation phase

Meaning of DVP&R and PVP&R - What is a DVP + What is a PVP?

APQP Phase 3 - Process development phase

APQP Phase 2 - Product Development

APQP Phase 1 - Project planning

What is APQP - Advanced Product Quality Planning?

Рекомендуемое видео

What is APQP (Advanced Product Quality Planning)? 🚗 | Opexity

Leadership and Management | Part 3 of 4:The Four Functions of Management

Power Plant | How it Works Power Plant Steam Cycle

Order-to-Cash Process in SAP SD – Step by Step (Full Beginner Guide 2025)

Introduction to Constrained Planning

Introduction 1, Context

PLC Programming #5: User-Defined Data Types (UDTs) Explained

What Are PCB and PCBA? What’s the Difference Between Them?

Incident Management Process: A Step by Step guide

A Plan Is Not a Strategy

QUALITY CONTROL Interview Questions & Answers! (Inspector, Manager + Assessor Interview Questions!

What do Design Managers do?