Luyện nói tiếng Anh bằng Shadowing qua video: The Three NPI Phases Explained
Đang tạo bài học...
1
Then you say you start your NPI process
2
and this is comprised of three phases and after
3
that it's really ready for ongoing mass production and ramp up of the volumes, right?
4
Correct.
5
So what are these three phases?
6
So the three phases are engineering validation, design validation, and production validation.
7
Some people, a lot of people are familiar with these terms
8
but they're not familiar with what the actual meaning is and how you qualify from one phase to the next.
9
So a lot of people have misinterpreted this to mean that you've got three chances to build it and get it right.
10
That's not correct.
11
Each phase has different meaning.
12
So the engineering validation you want to prove out from an engineering point of view that your tooling is good, your enclosures are good, your PCBA is good,
13
that your features are all present and that your device is working as intended.
14
At the end of an ADT build you should sit in a room with all of your engineers
15
and all of them can say that their functions have been complete and this product is performing as expected.
16
So the output is not only a prototype that's much closer to what's intended
17
because it is made this time with the same manufacturing process as it is intended, it also comes on the supply chain side with a BOM,
18
so you already started to select the component suppliers, you've been working very closely with obviously also the assembly and testing supplier.
19
On the technical side you've gone into all the details of the design, the mechanical design, engineering design, the firmware design and so on.
20
Is that correct?
21
That's correct, yes.
22
So that EBT part that you've built should be fully representative of your supply chain and your processes.
📺 Cùng kênh
C17
What is SMT (Surface Mount Technology)? PCB Assembly (Part 2)
Business EnglishUniversity StudentsWorking Adults
C1Sofeast PCB Video Series Introduction
Business EnglishUniversity StudentsWorking Adults
B22
DFM And DFA Explained
Business EnglishUniversity StudentsWorking Adults
C13
What is SMT (Surface Mount Technology)? PCB Assembly (Part 3)
Business EnglishUniversity StudentsWorking Adults
C14
PCB Inspection Methods & Common PCB Defects
Business EnglishUniversity StudentsWorking Adults
C13
NPI Process 1: Why A Pilot Run Before Mass Production Is Very Useful
Business EnglishUniversity StudentsWorking Adults
C15
What is SMT (Surface Mount Technology)? PCB Assembly (Part 1)
Business EnglishUniversity StudentsWorking Adults
B2BONUS: Should we do PCB or enclosure design first? (Feat Andrew Amirnovin)
Business EnglishUniversity StudentsWorking Adults
B2What are PCBs and PCBAs? The 'PCB basics'
University StudentsWorking Adults
B1Don’t Approve a Product Until You’ve Lived With It
Business EnglishWorking Adults
B1The Product Passed the Safety Test, But Was Still Too Hot to Hold
Business EnglishWorking Adults
B2The Product Worked, But the Packaging Made It Look Dead
Business EnglishWorking Adults
B2Why User Experience Is Harder Than Engineering
Business EnglishUniversity StudentsWorking Adults
C14 NPI Tips Before You Move Into Mass Production
Business EnglishWorking Adults
C1The Production Validation Test (PVT) Phase of the NPI Process
Business EnglishWorking Adults
C1When Can The NPI Process Begin?
Business EnglishUniversity StudentsWorking Adults
C1NPI Process #3: Why A Feasibility Study With Suppliers Saves Time & Prevents Issues
Business EnglishWorking Adults
C1NPI Process 2: New Product Development Process (Why Planning Before Prototyping Saves Time)
Business EnglishUniversity StudentsWorking Adults
C1PCBs | Electronic Goods Reliability Testing
Business EnglishUniversity StudentsWorking Adults
✨ Video gợi ý
C167 câu
The Ultimate IoT Roadmap in 2026? | Embedded Systems & IoT Career Roadmap
Business EnglishUniversity StudentsWorking Adults
C15
107 câu
What is NLP? Neuro Linguistic Programming
Business EnglishUniversity StudentsWorking Adults
C11
106 câu
EDFR GWO BTT Training Center - Nicolas Riou Wind
Business EnglishUniversity StudentsWorking Adults
C12
43 câu
SDLC Vs STLC: Software Development Life Cycle and Software Testing Life Cycle
Business EnglishUniversity StudentsWorking Adults
C12
34 câu
Manufacturing Defined - What Is Manufacturing?
Business EnglishUniversity StudentsWorking Adults
C11
443 câu
Functional-Oriented Documentation in Automation - Eplan & IEC 81346 Explained
Business EnglishUniversity StudentsWorking Adults
C130 câu
7 Phases of Penetration Testing Explained | Think your system is safe? #cybersecurity #pentesting
Business EnglishUniversity StudentsWorking Adults
B21
373 câu
I built my dream podcast studio in Austin.
Business EnglishDaily ConversationUniversity Students
C11
19 câu
I Made an EMP Device... It Actually Works
Business EnglishUniversity StudentsWorking Adults
C17
41 câu
Design Thinking 101
Business EnglishUniversity StudentsWorking Adults
Về Bài Học Này
Bạn đang luyện tập phát âm tiếng Anh với video "The Three NPI Phases Explained" bằng phương pháp Shadowing — kỹ thuật được Dr. Alexander Arguelles phổ biến rộng rãi.
Hãy nghe kỹ từng câu, chú ý cách người nói nhấn âm và nối âm, rồi đọc lại to và tự tin. Mỗi ngày 15–30 phút luyện đều đặn, bạn sẽ thấy phát âm chuẩn hơn.
Phương Pháp Shadowing Là Gì?
Shadowing là kỹ thuật học ngôn ngữ có cơ sở khoa học, ban đầu được phát triển cho chương trình đào tạo phiên dịch viên chuyên nghiệp và được phổ biến rộng rãi bởi nhà đa ngôn ngữ học Dr. Alexander Arguelles. Nguyên lý cốt lõi đơn giản nhưng cực kỳ hiệu quả: bạn nghe tiếng Anh của người bản xứ và lặp lại to ngay lập tức — như một "cái bóng" (shadow) đuổi theo người nói với độ trễ chỉ 1–2 giây. Khác với luyện ngữ pháp hay học từ vựng bị động, Shadowing buộc não bộ và cơ miệng phải đồng thời xử lý và tái tạo ngôn ngữ thực tế. Các nghiên cứu khoa học xác nhận phương pháp này cải thiện đáng kể phát âm, ngữ điệu, nhịp điệu, nối âm, kỹ năng nghe và độ lưu loát khi nói — đặc biệt hiệu quả cho người luyện IELTS Speaking và muốn giao tiếp tiếng Anh tự nhiên như người bản ngữ.