Luyện nói tiếng Anh bằng Shadowing qua video: What is SMT (Surface Mount Technology)? PCB Assembly (Part 3)
Đang tạo bài học...
1
Welcome to this video.
2
This is part 3 of using surface mount technology to assemble PCBs.
3
Electrical testing process.
4
This is the last section of the process as you can see here.
5
So So physical testing of printed circuit boards can also be carried out within the SMT production line.
6
This is known as inline testing.
7
However, it is more common for physical testing to be carried out offline in a separate area or test station.
8
This is known as in-circuit testing.
9
Although the generic term in-circuit testing or ICT is widely used within the electronics manufacturing industry,
10
there are actually several different types of tester that are available.
11
The type of tester required is dependent upon the manufacturing test process used, the volume and the boards that are used.
12
Let's have a look at the different types of in-circuit tester.
13
Let's start with the flying probe tester.
14
In view of the issues of developing and manufacturing complete bed of nail access fixtures,
15
they are costly and difficult to change if any component positions or tracks are moved.
16
Another approach is to use a roving or flying probe.
17
This has a simple fixture to hold the board
18
and contact is made via a few probes that can move around the board and make contact as required.
19
These are moved under software control so any board updates can be accommodated with changes to the software program.
20
Another reason to use flying probes is the shrinking component size and denser chip scale packaging technologies.
21
Manufacturing Defect Analyzer or MDA.
22
The tester makes contact to the board under test using a bed of nails fixture
23
and this means that a different fixture is generally required for each board.
24
It needs to make contact with specific points on the board where often there may be test point
25
or a land area for the probe.
26
This form of tester offers a basic in circuit test of resistance, continuity and insulation.
27
As the name implies it is just used for detecting the manufacturing defects like short circuits across tracks and open circuit connections.
28
Automated X-ray inspection.
29
AXI as is known is a technology based on the same principles as automated optical inspection or AOI.
30
It uses x-rays as its source instead of visible light to automatically inspect features which are typically hidden from view.
31
Automated x-ray inspection equipment can not only check the solder joints under components,
32
but also reveal any defects in solder joints that may not be visible with ordinary optical inspection equipment.
33
First off, sample inspection.
34
The inspection microscope is generally used in FAI or first article inspection,
35
which is required to ensure that the first product produced is 100% correct.
36
In the SME industry, there is a need to ensure
37
that the first off from any SMT assembly line is perfect before running the rest of the batch.
38
Functional testing.
39
At the end of the line, there needs to be a functional test to establish if the PCB actually functions and conforms to specification.
40
The key features of the functional test are Identify errors in all functional aspects of the PCB
41
Identify failure thresholds in the PCB when both upper and lower voltages are applied Simulate the operating environment for the PCB
42
Verify speed, frequency, oscillations and other onboard timing elements Verify all input and output features conform to specification
43
and establish all communication features are operational.
44
Burn-in testing.
45
Burn-in is a technique used as part of the quality insurance
46
procedures where assembled printed circuit boards are operated under both normal and accelerated environmental conditions prior to shipment.
47
Theoretically, any weak components would fail during the burn-in time allowing those parts to be replaced.
48
Replacing the weak components would prevent premature failure, infant mortality failure, or other latent defects.
49
On the right-hand side here, we can see a typical burn-in bathtub graph.
50
We can see that the decreasing failure rate shows the early infant mortality failures.
51
The constant failure rate covers the constant or random failures, whereas the increasing failure rate shows the wearout failures.
52
This graph is failure rate over time
53
Don't forget to check out our other videos in this PCB series
54
You can contact us if you need any help with your projects at all in China And don't forget to like, share and subscribe to our channel
55
And you see this little bell symbol If you hit that you'll get a notification each time we upload new content
56
So thanks for listening, my name is Paul Adams from SofEast and I shall see you in the next video
📺 Cùng kênh
C17
What is SMT (Surface Mount Technology)? PCB Assembly (Part 2)
Business EnglishWorking Adults
C1Sofeast PCB Video Series Introduction
Business EnglishUniversity StudentsWorking Adults
B22
DFM And DFA Explained
Business EnglishUniversity StudentsWorking Adults
C14
PCB Inspection Methods & Common PCB Defects
Business EnglishUniversity StudentsWorking Adults
C13
NPI Process 1: Why A Pilot Run Before Mass Production Is Very Useful
Business EnglishUniversity StudentsWorking Adults
C15
What is SMT (Surface Mount Technology)? PCB Assembly (Part 1)
Business EnglishUniversity StudentsWorking Adults
B2BONUS: Should we do PCB or enclosure design first? (Feat Andrew Amirnovin)
Business EnglishUniversity StudentsWorking Adults
B2What are PCBs and PCBAs? The 'PCB basics'
University StudentsWorking Adults
B1Don’t Approve a Product Until You’ve Lived With It
Business EnglishWorking Adults
B1The Product Passed the Safety Test, But Was Still Too Hot to Hold
Business EnglishWorking Adults
B2The Product Worked, But the Packaging Made It Look Dead
Business EnglishWorking Adults
B2Why User Experience Is Harder Than Engineering
Business EnglishUniversity StudentsWorking Adults
C14 NPI Tips Before You Move Into Mass Production
Business EnglishWorking Adults
C1The Production Validation Test (PVT) Phase of the NPI Process
Business EnglishWorking Adults
C1The Three NPI Phases Explained
Business EnglishUniversity StudentsWorking Adults
C1When Can The NPI Process Begin?
Business EnglishUniversity StudentsWorking Adults
C1NPI Process #3: Why A Feasibility Study With Suppliers Saves Time & Prevents Issues
Business EnglishWorking Adults
C1NPI Process 2: New Product Development Process (Why Planning Before Prototyping Saves Time)
Business EnglishUniversity StudentsWorking Adults
C1PCBs | Electronic Goods Reliability Testing
Business EnglishUniversity StudentsWorking Adults
✨ Video gợi ý
C13
47 câu
Seven Testing Principles: Software Testing
Business EnglishUniversity StudentsWorking Adults
C11
106 câu
EDFR GWO BTT Training Center - Nicolas Riou Wind
Business EnglishUniversity StudentsWorking Adults
C11
19 câu
Types of Proximity Sensors! #automation #engineering #science #robotics #electronics
Business EnglishUniversity StudentsWorking Adults
C14
32 câu
UltraSnap® Surface ATP Test
Business EnglishUniversity StudentsWorking Adults
C132 câu
Peripheral Seal Zone Concept (PSZ) in Biomimetic Restorative Dentistry
Business EnglishUniversity StudentsWorking Adults
C124 câu
We Are AmSpec Group
Business EnglishUniversity StudentsWorking Adults
C14
28 câu
Comparing Low Voltage Vs. Medium Voltage Equipment on Solar Sites
Business EnglishUniversity StudentsWorking Adults
C167 câu
The Ultimate IoT Roadmap in 2026? | Embedded Systems & IoT Career Roadmap
Business EnglishUniversity StudentsWorking Adults
C11
114 câu
BAS Bootcamp: Day 6 Setting up IO Internally
Business EnglishUniversity StudentsWorking Adults
C11
282 câu
什麼是屏蔽罩(shielding can)？工程師對屏蔽罩的愛恨情仇
Business EnglishUniversity StudentsWorking Adults
Từ vựng và ghi chú luyện nói cho bài học này
Bài luyện nói trình độ C1 này dựa trên video “What is SMT (Surface Mount Technology)? PCB Assembly”. Những từ được nhắc lại nhiều nhất trong bài: failure, board, circuit, testing, inspection. Video này có 56 câu và 769 từ để luyện shadowing. Phần lời nói dài 5:51. Người nói giữ tốc độ đều, khoảng 131 từ mỗi phút, vừa sức để nói đuổi theo. Chỉ 77% số từ nằm trong 3.000 từ tiếng Anh thông dụng nhất, nên từ vựng khá khó.
Từ vựng quan trọng trong video
15 từ khó nhất trong video, kèm phiên âm và nghĩa:
| Từ | Phiên âm | Nghĩa |
|---|---|---|
| defect danh từ | /ˈdiːfɛkt/ | tật, lỗi |
| solder danh từ | /ˈsɒl.də(ɹ)/ | chất hàn |
| conform động từ | /kənˈfɔɹm/ | tuân theo |
| assemble động từ | /əˈsɛm.bəl/ | tập hợp |
| specification danh từ | quy cách, quy phạm | |
| infant danh từ | /ˈɪn.fənt/ | trẻ sơ sinh |
| graph danh từ | /ɡɹæf/ | biểu đồ |
| bathtub danh từ | /ˈbæθtʌb/ | bể tắm, bồn tắm |
| latent tính từ | /ˈleɪ.tənt/ | ngầm, ngấm ngần |
| microscope danh từ | /ˈmaɪ.kɹəˌskoʊp/ | kính hiển vi |
| inspect động từ | /ɪnˈspɛkt/ | kiểm tra |
| theoretically trạng từ | về lý thuyết | |
| accelerate động từ | /ɪkˈsɛl.əˌɹeɪt/ | tăng tốc |
| premature tính từ | /ˌpɹi.məˈtʊɹ/ | yểu, non |
| offline tính từ | /ɔfˈlaɪn/ | ngoại tuyến, gián tuyến |
Cụm động từ bạn sẽ nghe
| Từ | Nghĩa |
|---|---|
| check out động từ | tính tiền, trả phòng |
Phát âm cần chú ý
Người nói dùng 3 dạng rút gọn, ví dụ don't, you'll. Hãy nói theo dạng ngắn đúng như bạn nghe.
- Âm “th”: bathtub /ˈbæθtʌb/, threshold /ˈθɹɛʃ(h)oʊld/
- Âm “sh” và “zh”: oscillation /ˌɒ.sɪˈleɪ.ʃən/, insulation /ˌɪnsəˈleɪʃən/, shipment /ˈʃɪpmənt/, notification /ˌnoʊtɪfɪˈkeɪʃn̩/, threshold /ˈθɹɛʃ(h)oʊld/
- Từ dài — đặt trọng âm cho đúng: mortality /mɔɹˈtælɪti/, oscillation /ˌɒ.sɪˈleɪ.ʃən/, accelerate /ɪkˈsɛl.əˌɹeɪt/, insulation /ˌɪnsəˈleɪʃən/, continuity /ˌkɑn.tɪˈn(j)u.ə.ti/
Cách luyện với video này
- Nghe hết video một lần, chưa cần nói, và ghi lại những từ bạn chưa biết.
- Nói đuổi từng câu ở tốc độ bình thường, lặp lại mỗi câu đến khi nhịp của bạn khớp với người nói.
- Ghi âm giọng mình rồi so với bản gốc, chú ý các từ như defect, solder, conform.
Phương Pháp Shadowing Là Gì?
Shadowing là kỹ thuật học ngôn ngữ có cơ sở khoa học, ban đầu được phát triển cho chương trình đào tạo phiên dịch viên chuyên nghiệp và được phổ biến rộng rãi bởi nhà đa ngôn ngữ học Dr. Alexander Arguelles. Nguyên lý cốt lõi đơn giản nhưng cực kỳ hiệu quả: bạn nghe tiếng Anh của người bản xứ và lặp lại to ngay lập tức — như một "cái bóng" (shadow) đuổi theo người nói với độ trễ chỉ 1–2 giây. Khác với luyện ngữ pháp hay học từ vựng bị động, Shadowing buộc não bộ và cơ miệng phải đồng thời xử lý và tái tạo ngôn ngữ thực tế. Các nghiên cứu khoa học xác nhận phương pháp này cải thiện đáng kể phát âm, ngữ điệu, nhịp điệu, nối âm, kỹ năng nghe và độ lưu loát khi nói — đặc biệt hiệu quả cho người luyện IELTS Speaking và muốn giao tiếp tiếng Anh tự nhiên như người bản ngữ.