Shadowing-Übung: What are PCBs and PCBAs? The 'PCB basics' - Englisch Sprechen Lernen mit Video
Lektion wird erstellt...
1
Welcome to this video series where we're going to be looking at PCBs.
2
This is the first video and we're going to be looking at PCB basics.
3
So what's the difference between a PCB and a PCBA?
4
Well you can generally refer to a blank unstuffed and unsoldered printed circuit board as a PCB.
5
You can see an example of this on the top image here.
6
The assembled and soldered assembly is then known as a PCBA or a board assembly or simply a PCA.
7
And you can see an example of this on this bottom image.
8
So if we look at the two differences,
9
the top one clearly has no components on it whereas the bottom has a fully populated set of components.
10
So the basic understanding of a PCB.
11
A basic PCB consists of a flat sheet of insulating material and a layer of copper foil laminated to the substrate.
12
Chemical etching divides the copper into separate conducting lines called tracks or circuit tracers,
13
pads for connections, wires to pass connections between layers of copper.
14
The tracks function as wires fixed in place and are insulated from each other by air and the bored substrate material.
15
The surface of the PCB may have a coating
16
that protects the copper from corrosion and reduces the chances of solder shorts between traces
17
or undesired electrical contact from stray bare wires.
18
This coating is called the solder resist.
19
You can see an example of a bare PCB here on the right
20
where we can clearly see the tracks and the holes
21
or the wires going from one side of the board to the other.
22
So what makes up a PCB?
23
The basic PCB consists of four layers, which are heat laminated together into a single board.
24
The four layers are substrate, copper, solder mask and silk screen.
25
The substrate needs to be thermally stable and the most common material used is FR4.
26
FR4 is a glass epoxy high pressure thermoset plastic laminate with good strength to weight ratio with near zero water absorption.
27
FR simply stands for Flame Retardant.
28
And you can see the basic layers here in this image, where we have the substrate, the copper, the solder mask and the silkscreen on top.
29
So what are the different layers on top of the FR4?
30
First we have the copper layer, which is the electrical conductor where the tracks are etched, which make up the circuit.
31
The thickness can vary depending on the power requirements, but in general the thickness is around 35 microns or equivalent to 1.4 thou.
32
Second is the solder mask layer and this gives the PCB its green color.
33
Its purpose is to insulate the copper tracks from contact with metal, solder or other conductive items.
34
And third, the silkscreen layer is a combination of shapes, letters, symbols and instructions.
35
It provides identification for each part and you can clearly see
36
that in this image where we have part identifications don't forget to check out our other videos in this series
37
and you can always contact us
38
if you need any help with your projects in China
39
so don't forget to a like share and subscribe
40
if you hit this little bell symbol
41
that will notify you of any new content that we upload
42
so thanks for listening my name is Paul Adam from South East and I shall see you in the next video
📺 Gleicher Kanal
C17
What is SMT (Surface Mount Technology)? PCB Assembly (Part 2)
Business EnglishUniversity StudentsWorking Adults
C1Sofeast PCB Video Series Introduction
Business EnglishUniversity StudentsWorking Adults
B22
DFM And DFA Explained
Business EnglishUniversity StudentsWorking Adults
C13
What is SMT (Surface Mount Technology)? PCB Assembly (Part 3)
Business EnglishUniversity StudentsWorking Adults
C14
PCB Inspection Methods & Common PCB Defects
Business EnglishUniversity StudentsWorking Adults
C13
NPI Process 1: Why A Pilot Run Before Mass Production Is Very Useful
Business EnglishUniversity StudentsWorking Adults
C15
What is SMT (Surface Mount Technology)? PCB Assembly (Part 1)
Business EnglishUniversity StudentsWorking Adults
B2BONUS: Should we do PCB or enclosure design first? (Feat Andrew Amirnovin)
Business EnglishUniversity StudentsWorking Adults
B1Don’t Approve a Product Until You’ve Lived With It
Business EnglishWorking Adults
B1The Product Passed the Safety Test, But Was Still Too Hot to Hold
Business EnglishWorking Adults
B2The Product Worked, But the Packaging Made It Look Dead
Business EnglishWorking Adults
B2Why User Experience Is Harder Than Engineering
Business EnglishUniversity StudentsWorking Adults
C14 NPI Tips Before You Move Into Mass Production
Business EnglishWorking Adults
C1The Production Validation Test (PVT) Phase of the NPI Process
Business EnglishWorking Adults
C1The Three NPI Phases Explained
Business EnglishUniversity StudentsWorking Adults
C1When Can The NPI Process Begin?
Business EnglishUniversity StudentsWorking Adults
C1NPI Process #3: Why A Feasibility Study With Suppliers Saves Time & Prevents Issues
Business EnglishWorking Adults
C1NPI Process 2: New Product Development Process (Why Planning Before Prototyping Saves Time)
Business EnglishUniversity StudentsWorking Adults
C1PCBs | Electronic Goods Reliability Testing
Business EnglishUniversity StudentsWorking Adults
✨ Empfohlenes Video
C12
113 Sätze
What Are PCB and PCBA? What’s the Difference Between Them?
Business EnglishUniversity StudentsWorking Adults
C12
100 Sätze
Epithelial Tissue
Cambridge Exam PrepUniversity StudentsWorking Adults
B21
23 Sätze
Working Principle of Chiller Plant | Animation | English
Business EnglishUniversity StudentsWorking Adults
C11
181 Sätze
Aircraft General Knowledge | PPL Expert Online Ground School FREE Sample
Business EnglishUniversity StudentsWorking Adults
B21
41 Sätze
Making a 360° Controller Smaller than a Penny!
Business EnglishUniversity StudentsWorking Adults
B22
159 Sätze
Electrical Engineering Simply Explained
Business EnglishUniversity StudentsWorking Adults
B21
285 Sätze
The basics in Amplitube 5
Business EnglishUniversity StudentsWorking Adults
B2168 Sätze
Roman Catholic vs Eastern Orthodox: 60 Differences
University StudentsWorking Adults
C1101 Sätze
BGP Overview
Business EnglishUniversity StudentsWorking Adults
B26
205 Sätze
Everything You Didn’t Know About Titanium Bikes
Business EnglishUniversity StudentsWorking Adults
B21
389 Sätze
How To Go From B1 To B2 Level of English (What ACTUALLY Works)
Business EnglishDaily ConversationHigh School Students
Wortschatz und Sprechhinweise zu dieser Lektion
Dieses Video enthält 42 Sätze und 567 Wörter zum Nachsprechen. Der gesprochene Teil dauert 3:55. Der Sprecher spricht gleichmäßig mit etwa 145 Wörtern pro Minute – ein angenehmes Tempo fürs Shadowing. Nur 73 % der Wörter gehören zu den 3.000 häufigsten im Englischen, der Wortschatz ist also anspruchsvoll.
Wichtiger Wortschatz in diesem Video
15 lernenswerte Wörter aus dem Video, mit Aussprache und Bedeutung:
| Wort | Aussprache | Bedeutung |
|---|---|---|
| layer Substantiv | /ˈleɪ̯ɚ/ | Lage, Schicht |
| copper Substantiv | /ˈkɒpə/ | Kupfer |
| substrate Substantiv | /ˈsʌbˌstɹeɪt/ | Untergrund, Substrat |
| wire Substantiv | /ˈwaɪɚ/ | Draht |
| circuit Substantiv | /ˈsɝ.kɪt/ | Umlauf |
| mask Substantiv | /mæsk/ | Maske |
| coat Substantiv | /ˈkoʊ̯t/ | Mantel |
| component Substantiv | /kəmˈpoʊ.nənt/ | Komponente |
| symbol Substantiv | /ˈsɪmbəl/ | Symbol, Zeichen |
| identification Substantiv | /aɪˌdɛn(t)ɪfɪˈkeɪʃn̩/ | Identifizierung |
| consist Substantiv | /kənˈsɪst/ | Verband |
| thickness Substantiv | /ˈθɪknəs/ | Dicke |
| stable Substantiv | /ˈsteɪ.bəl/ | Stall, Pferdestall |
| refer Verb | /ɹɪˈfɜː/ | verweisen |
| whereas | /(h)wɛɹˈæz/ | wohingegen, wogegen |
Phrasal Verbs, die du hören wirst
| Wort | Aussprache | Bedeutung |
|---|---|---|
| make up Verb | /ˌmeɪk ˈʌp/ | wiedergutmachen, kompensieren |
| check out Verb | überprüfen |
Grammatik in diesem Video
Die Strukturen, die der Sprecher am häufigsten verwendet, mit den genauen Worten aus dem Video:
| Struktur | Im Video |
|---|---|
| Passiv be + Partizip Perfekt – wichtig ist, was geschieht, nicht wer es tut | are insulated · is called · are etched |
| Relativsätze who / which + Satz – eine Zusatzinformation über eine Person oder Sache | layers, which are · layer, which is |
Aussprache, auf die du achten solltest
Der Sprecher verwendet 4 Kurzformen und abgeschwächte Formen, zum Beispiel don't, we're. Sprich sie in der kurzen Form, so wie du sie hörst.
- Die Laute „sh“ und „zh“: identification /aɪˌdɛn(t)ɪfɪˈkeɪʃn̩/, sheet /ʃit/, ratio /ˈɹeɪ.ʃoʊ/, instruction /ɪnˈstɹʌkʃən/, absorption /æbˈsɔɹp.ʃn̩/
- Lange Wörter – auf die Betonung achten: electrical /ɪˈlɛktɹɪkəl/, identification /aɪˌdɛn(t)ɪfɪˈkeɪʃn̩/
So übst du mit diesem Video
- Höre dir das ganze Video einmal an, ohne zu sprechen, und notiere die Wörter, die du nicht kennst.
- Sprich Satz für Satz in normaler Geschwindigkeit nach und wiederhole jeden, bis dein Rhythmus zum Sprecher passt.
- Nimm dich auf und vergleiche mit dem Original; achte dabei auf Wörter wie layer, copper, substrate.
Was ist die Shadowing-Technik?
Shadowing ist eine wissenschaftlich fundierte Sprachlerntechnik, die ursprünglich für die professionelle Dolmetscherausbildung entwickelt und durch den Polyglotten Dr. Alexander Arguelles populär gemacht wurde. Die Methode ist einfach aber wirkungsvoll: Du hörst englisches Audio von Muttersprachlern und wiederholst es sofort laut — wie ein Schatten, der dem Sprecher mit nur 1–2 Sekunden Verzögerung folgt. Anders als passives Hören oder Grammatikübungen zwingt Shadowing dein Gehirn und deine Mundmuskulatur, gleichzeitig echte Sprachmuster zu verarbeiten und zu reproduzieren. Studien zeigen, dass es Aussprachegenauigkeit, Intonation, Rhythmus, verbundene Sprache, Hörverständnis und Sprechflüssigkeit signifikant verbessert — was es zu einer der effektivsten Methoden für die IELTS Speaking-Vorbereitung und reale englische Kommunikation macht.