쉐도잉 연습: What are PCBs and PCBAs? The 'PCB basics' - 영상으로 영어 말하기 배우기
레슨 만드는 중...
1
Welcome to this video series where we're going to be looking at PCBs.
2
This is the first video and we're going to be looking at PCB basics.
3
So what's the difference between a PCB and a PCBA?
4
Well you can generally refer to a blank unstuffed and unsoldered printed circuit board as a PCB.
5
You can see an example of this on the top image here.
6
The assembled and soldered assembly is then known as a PCBA or a board assembly or simply a PCA.
7
And you can see an example of this on this bottom image.
8
So if we look at the two differences,
9
the top one clearly has no components on it whereas the bottom has a fully populated set of components.
10
So the basic understanding of a PCB.
11
A basic PCB consists of a flat sheet of insulating material and a layer of copper foil laminated to the substrate.
12
Chemical etching divides the copper into separate conducting lines called tracks or circuit tracers,
13
pads for connections, wires to pass connections between layers of copper.
14
The tracks function as wires fixed in place and are insulated from each other by air and the bored substrate material.
15
The surface of the PCB may have a coating
16
that protects the copper from corrosion and reduces the chances of solder shorts between traces
17
or undesired electrical contact from stray bare wires.
18
This coating is called the solder resist.
19
You can see an example of a bare PCB here on the right
20
where we can clearly see the tracks and the holes
21
or the wires going from one side of the board to the other.
22
So what makes up a PCB?
23
The basic PCB consists of four layers, which are heat laminated together into a single board.
24
The four layers are substrate, copper, solder mask and silk screen.
25
The substrate needs to be thermally stable and the most common material used is FR4.
26
FR4 is a glass epoxy high pressure thermoset plastic laminate with good strength to weight ratio with near zero water absorption.
27
FR simply stands for Flame Retardant.
28
And you can see the basic layers here in this image, where we have the substrate, the copper, the solder mask and the silkscreen on top.
29
So what are the different layers on top of the FR4?
30
First we have the copper layer, which is the electrical conductor where the tracks are etched, which make up the circuit.
31
The thickness can vary depending on the power requirements, but in general the thickness is around 35 microns or equivalent to 1.4 thou.
32
Second is the solder mask layer and this gives the PCB its green color.
33
Its purpose is to insulate the copper tracks from contact with metal, solder or other conductive items.
34
And third, the silkscreen layer is a combination of shapes, letters, symbols and instructions.
35
It provides identification for each part and you can clearly see
36
that in this image where we have part identifications don't forget to check out our other videos in this series
37
and you can always contact us
38
if you need any help with your projects in China
39
so don't forget to a like share and subscribe
40
if you hit this little bell symbol
41
that will notify you of any new content that we upload
42
so thanks for listening my name is Paul Adam from South East and I shall see you in the next video
📺 같은 채널
C17
What is SMT (Surface Mount Technology)? PCB Assembly (Part 2)
Business EnglishWorking Adults
B2Sofeast PCB Video Series Introduction
Daily ConversationWorking Adults
C12
DFM And DFA Explained
Daily ConversationWorking Adults
C13
What is SMT (Surface Mount Technology)? PCB Assembly (Part 3)
Daily ConversationWorking Adults
C14
PCB Inspection Methods & Common PCB Defects
Daily ConversationWorking Adults
C13
NPI Process 1: Why A Pilot Run Before Mass Production Is Very Useful
Business EnglishWorking Adults
C15
What is SMT (Surface Mount Technology)? PCB Assembly (Part 1)
Business EnglishUniversity StudentsWorking Adults
B2BONUS: Should we do PCB or enclosure design first? (Feat Andrew Amirnovin)
Business EnglishUniversity StudentsWorking Adults
B1Don’t Approve a Product Until You’ve Lived With It
Business EnglishWorking Adults
B1The Product Passed the Safety Test, But Was Still Too Hot to Hold
Business EnglishWorking Adults
B2The Product Worked, But the Packaging Made It Look Dead
Business EnglishWorking Adults
B2Why User Experience Is Harder Than Engineering
Business EnglishUniversity StudentsWorking Adults
C14 NPI Tips Before You Move Into Mass Production
Business EnglishWorking Adults
C1The Production Validation Test (PVT) Phase of the NPI Process
Business EnglishWorking Adults
C1The Three NPI Phases Explained
Business EnglishUniversity StudentsWorking Adults
C1When Can The NPI Process Begin?
Business EnglishUniversity StudentsWorking Adults
C1NPI Process #3: Why A Feasibility Study With Suppliers Saves Time & Prevents Issues
Business EnglishWorking Adults
C1NPI Process 2: New Product Development Process (Why Planning Before Prototyping Saves Time)
Business EnglishUniversity StudentsWorking Adults
C1PCBs | Electronic Goods Reliability Testing
Business EnglishUniversity StudentsWorking Adults
✨ 추천 영상
C12
113 문장
What Are PCB and PCBA? What’s the Difference Between Them?
Business EnglishUniversity StudentsWorking Adults
B21
80 문장
Python3 For Pentesting - Introduction
Daily ConversationUniversity StudentsWorking Adults
B21
109 문장
How ELECTRICITY works - working principle
Daily ConversationUniversity StudentsWorking Adults
B23
242 문장
Improve your English with this study PLAN: Elementary to Intermediate (Marina Mogilko)
Business EnglishDaily ConversationHigh School Students
B2168 문장
Roman Catholic vs Eastern Orthodox: 60 Differences
University StudentsWorking Adults
C1101 문장
BGP Overview
Daily ConversationUniversity StudentsWorking Adults
C11
64 문장
What is SCADA?
Daily ConversationUniversity StudentsWorking Adults
C13
131 문장
Understanding BGA Pads: Solder Mask Defined vs Non-Defined
Business EnglishUniversity StudentsWorking Adults
C11
41 문장
Making a 360° Controller Smaller than a Penny!
Daily ConversationUniversity StudentsWorking Adults
B22
90 문장
Brian Cox School Experiments: plastics – industry video
Business EnglishDaily ConversationUniversity Students
B22
25 문장
English Vocabulary for Engineering: Bolts
Business EnglishUniversity StudentsWorking Adults
이 레슨의 어휘와 말하기 포인트
이 영상에는 섀도잉할 문장 42개와 단어 567개가 있습니다. 말하는 구간의 길이는 3:55입니다. 화자는 분당 약 145단어의 일정한 속도로 말해서 섀도잉하기에 편한 속도입니다. 영어에서 가장 많이 쓰이는 3,000단어에 속하는 단어가 73%뿐이라 어휘가 어려운 편입니다.
이 영상의 핵심 어휘
영상에 나오는 익혀 둘 만한 단어 15개를 발음, 뜻과 함께 정리했습니다.
| 단어 | 발음 | 뜻 |
|---|---|---|
| layer 명사 | /ˈleɪ̯ɚ/ | 층 |
| copper 명사 | /ˈkɒpə/ | 구리, 구리쇠 |
| wire 명사 | /ˈwaɪɚ/ | 철사 |
| mask 명사 | /mæsk/ | 가면, 마스크 |
| coat 명사 | /ˈkoʊ̯t/ | 코트, 외투 |
| component 명사 | /kəmˈpoʊ.nənt/ | 부분 |
| symbol 명사 | /ˈsɪmbəl/ | 상징, 부호 |
| identification 명사 | /aɪˌdɛn(t)ɪfɪˈkeɪʃn̩/ | 식별 |
| thickness 명사 | /ˈθɪknəs/ | 두께 |
| stable 명사 | /ˈsteɪ.bəl/ | 마구간, 축사 |
| refer 동사 | /ɹɪˈfɜː/ | 언급하다 |
| sheet 명사 | /ʃit/ | 장, 시트 |
| ratio 명사 | /ˈɹeɪ.ʃoʊ/ | 비, 비율 |
| requirement 명사 | /ɹɪˈkwaɪɹmənt/ | 요구 |
| depend 동사 | /dɪˈpɛnd/ | 의존하다, ...에 달려 있다 |
이 영상의 문법
화자가 가장 많이 쓰는 문형을 영상 속 실제 표현과 함께 정리했습니다.
| 문형 | 영상 속 표현 |
|---|---|
| 수동태 be + 과거분사 — 누가 하는지보다 무슨 일이 일어나는지에 초점 | are insulated · is called · are etched |
| 관계절 who / which + 절 — 사람이나 사물에 대한 추가 정보 | layers, which are · layer, which is |
주의할 발음
화자는 don't, we're 같은 축약형과 약화된 형태를 4번 사용합니다. 들리는 대로 짧게 발음하세요.
- “sh”와 “zh” 소리: identification /aɪˌdɛn(t)ɪfɪˈkeɪʃn̩/, sheet /ʃit/, ratio /ˈɹeɪ.ʃoʊ/, instruction /ɪnˈstɹʌkʃən/, absorption /æbˈsɔɹp.ʃn̩/
- 긴 단어 — 강세 위치에 주의: electrical /ɪˈlɛktɹɪkəl/, identification /aɪˌdɛn(t)ɪfɪˈkeɪʃn̩/
이 영상으로 연습하는 방법
- 먼저 말하지 않고 영상을 끝까지 듣고 모르는 단어를 적어 둡니다.
- 보통 속도로 한 문장씩 섀도잉하고, 화자의 리듬과 맞을 때까지 반복합니다.
- 자신의 목소리를 녹음해 원본과 비교하고, layer, copper, wire 같은 단어에 특히 주의합니다.
쉐도잉이란? 영어 실력을 빠르게 키우는 과학적 방법
쉐도잉(Shadowing)은 원래 전문 통역사 훈련을 위해 개발된 언어 학습 기법으로, 다언어 학자인 Dr. Alexander Arguelles에 의해 대중화된 방법입니다. 핵심 원리는 간단하지만 매우 강력합니다: 원어민의 영어를 들으면서 1~2초의 짧은 지연으로 즉시 소리 내어 따라 말하는 것——마치 '그림자(shadow)'처럼 화자를 따라가는 것입니다. 문법 공부나 수동적인 청취와 달리, 쉐도잉은 뇌와 입 근육이 동시에 실시간으로 영어를 처리하고 재현하도록 훈련합니다. 연구에 따르면 이 방법은 발음 정확도, 억양, 리듬, 연음, 청취력, 말하기 유창성을 크게 향상시킵니다. IELTS 스피킹 준비와 자연스러운 영어 소통을 원하는 분들에게 특히 효과적입니다.