Prática de Shadowing: How Tire Rolling Resistance Affects Cycling Speed ? - Aprenda a falar inglês com vídeo

Criando lição...
1
What is rolling resistance and why should you think about it on the bike?
2
Rolling resistance is, quite simply, the energy that is lost as a tyre rolls along a surface.
3
The energy is mostly lost because of the constant deformation of that tyre against the surface.
4
Now, whilst paying attention to rolling resistance is important, it's not actually the biggest resistance factor when it comes to cycling fast.
5
Air resistance rises in a squared ratio with increased speed.
6
At a speed of 20 kilometers an hour on a level ground, air resistance has already become the main resistance force.
7
And the faster you go, the more air resistance increases exponentially.
8
So before even thinking about rolling resistance, get aero.
9
Acceleration energy is also expended, for instance, the weight of the wheels is of great importance when this mass has to be brought up to rotation.
10
Then when riding uphill, the main resistance force to be overcome is the gradient resistance.
11
This is basically the additional resistance added by fighting gravity.
12
And in addition to these, there are other friction resistances in the chain, the bottom bracket, and other rotating parts.
13
Now, in a well-serviced bicycle, these represent a very minor part of the total resistance.
14
So, should you just ignore rolling resistance then?
15
Well, no. Because improving your rolling resistance may be the cheapest
16
and easiest upgrade you can make to your bike to go faster.
17
You can improve all the others by getting aero, by getting a good bike fit and spending the time getting used to it, by getting aerodynamic and light frame,
18
by getting some aerodynamic race wheels, and even by upgrading the bearings to maybe ceramic bearings.
19
But you can get big gains simply by upgrading your tires and improving your rolling resistance.
20
And of course, pumping those tires to the right pressure.
21
It's pretty simple.
22
A tire with a higher rolling resistance will require more power
23
to attain the same speed than a tire with a lower rolling resistance, will require less power.
24
So what factors affect the tyres rolling resistance?
25
Tyre pressure.
26
On a completely smooth surface the following applies.
27
The higher the inflation pressure the less the tyre deforms and thus the lower the rolling resistance.
28
However on an imperfect surface which we are always riding on lower inflation pressures cause the opposite, lower rolling resistance.
29
Imperfections in the road on a very hard tyre will cause bouncing and skipping and increased resistance, not to mention the toll that takes on the rider in terms of fatigue.
30
Whereas a tyre with low inflation pressure can adapt better to the rugged surface.
31
It sinks into the ground less and absorbs imperfections rather than pushing against them and bouncing off them.
32
And so with a softer tyre the whole rotational mass is held back much less on the uneven surface.
33
Tire width.
34
At the same tyre pressure on a smooth surface a wider tyre will have lower rolling resistance than a narrower tyre.
35
This is essentially because a wider tyre with the same pressure actually has an effect of higher pressure
36
because a wider tyre with a higher air volume will have a higher casing tension.
37
Basically the wider tyre will be harder because it needs more air to fill it and the contact patch, the bit of the tire touching the road, will be smaller and wider, decreasing the rolling resistance.
38
But again this only holds true on a smooth surface.
39
On an imperfect surface with the pressure corrected for the width to get the tire to the right hardness, the contact patch on the road for a wider tire will be shorter and wider than a narrow tire,
40
decreasing the rolling resistance.
41
Importantly the wider the tyre will have more versatility and the range of pressures you can actually use, allowing you to more easily correct for the roughness of the surface.
42
Tyre construction.
43
Obviously the tyre construction has an effect on rolling resistance.
44
By using less material, less material can and will be deformed.
45
And the more flexible the material is, such as the rubber compound, the less energy is lost through deformation.
46
Generally, smoother treads have a lower rolling resistance than rougher treads
47
and that is why almost all road
48
and triathlon racing tires have very smooth tread patterns
49
if any tread pattern at all interestingly actually in racing tires for the road the tread pattern
50
that is there is actually not there for grip
51
or water dispersion it's mostly there for aerodynamics
52
because the tread pattern actually trips the laminar flow as
53
that of that air that's hitting the tire to improve the aerodynamics So,
54
should you consult a website like BicycleRollingResistance.com where they list all the tested rolling resistance of all tyres
55
and simply choose the one from the top of the list?
56
Well, yes and no. Yes, the tires on the top of that list will be the fastest.
57
However, they're always compromises.
58
Some of them may sacrifice durability for that extra speed and be more prone to punctures.
59
Some of them may have a different compound that sacrifices comfort
60
and grip and road feel and some may simply not work well with your wheel and bike setup.
61
It's also worth pointing out that the difference between the top of
62
that list of racing tires and the middle of
63
that list of racing tires is about a two to three watt saving
64
which is an almost imperceptible difference for most mere mortals.
65
They will however have a significant difference in those racing tires over your standard training tires.
66
So the answer is that the best tire for you depends on many factors
67
but it is worth considering investing the $100 to $200 in a good pair of racing tyres.
68
It may just be the cheapest watts you buy this season.
69
One more thing before we go, you may be asking which is faster rolling resistance-wise, tubeless or clincher?
70
Well, the speed of a tyre actually depends on its construction and not whether it's set up clincher or tubeless.
71
So, a slow tubeless tyre will actually be slower than a fast clincher tyre.
72
However, generally speaking, setup does have better rolling resistance than a tube setup.
73
However, if you put a latex tube in a clincher, the rolling resistance is actually the same as tubeless.
74
I hope you've enjoyed this video.
75
Happy riding!

Vocabulário e dicas de fala para esta lição

Este vídeo tem 75 frases e 1065 palavras para praticar shadowing. A fala dura 5:59. O falante fala em ritmo natural, cerca de 178 palavras por minuto, próximo de uma conversa do dia a dia. Apenas 76% das palavras estão entre as 3.000 mais comuns do inglês, por isso o vocabulário é exigente.

Vocabulário principal deste vídeo

15 palavras do vídeo que vale a pena aprender, com pronúncia e significado:

PalavraPronúnciaSignificado
tyre substantivo/taɪə(ɹ)/pneu
tire verbo/ˈtaɪ̯ɚ/cansar, fatigar
tread verbo/tɹɛd/espezinhar
smooth adjetivo/smuːð/suave
upgrade verbo/əpˈɡɹeɪd/melhorar
inflation substantivo/ɪnˈfleɪ.ʃən/inflação
narrow adjetivo/ˈnæɹəʊ/estreito, estreita
tube substantivo/tuːb/tubo, bisnaga
sacrifice substantivo/ˈsæk.ɹɪ.faɪs/sacrifício
bearing substantivo/ˈbɛɹɪŋ/rolamento
depend verbo/dɪˈpɛnd/depender
patch substantivo/pæt͡ʃ/remendo
compound substantivo/ˈkɑmpaʊnd/composto
decrease verbo/dɪˈkɹiːs/diminuir, reduzir
grip substantivo/ˈɡɹɪp/agarra, agarro

Phrasal verbs que você vai ouvir

PalavraPronúnciaSignificado
point out verboapontar
set up verbo/ˌsɛt ˈʌp/preparar

Pronúncia para ficar de olho

  • Os sons de “th”: smooth /smuːð/, width /ˈwɪtθ/, triathlon /tɹaɪˈæθˌlɑn/
  • Os sons de “sh” e “zh”: inflation /ɪnˈfleɪ.ʃən/, essentially /ɪˈsɛnʃəli/, ratio /ˈɹeɪ.ʃoʊ/, tension /ˈtɛnʃən/, rotation /ɹoʊˈteɪʃən/
  • Palavras longas — acerte a sílaba tônica: essentially /ɪˈsɛnʃəli/, importantly /ɪmˈpɔɹ.tənt.li/, acceleration /əkˌsɛl.əˈɹeɪ.ʃən/, aerodynamic /ˌɛəɹəʊdaɪˈnæmɪk/, deformation /ˌdɛfəˈmeɪʃən/

Como praticar com este vídeo

  1. Ouça o vídeo inteiro uma vez sem falar e anote as palavras que você não conhece.
  2. Comece na velocidade 0,75×, faça shadowing frase por frase e volte à velocidade normal quando ficar fácil.
  3. Grave a sua voz e compare com o original, prestando atenção a palavras como tyre, tire, tread.

Gramática neste vídeo

As estruturas que o falante mais usa, com as palavras exatas do vídeo:

EstruturaNo vídeo
Voz passiva be + particípio passado — o foco está no que acontece, não em quem fazis lost · is also expended · be overcome
Present perfect have/has + particípio passado — uma ação passada que ainda importa agorahas already become · you've enjoyed

O que é a Técnica de Shadowing?

Shadowing é uma técnica de aprendizado de idiomas com base científica, originalmente desenvolvida para o treinamento de intérpretes profissionais. O método é simples, mas poderoso: você ouve áudio em inglês nativo e repete imediatamente em voz alta — como uma sombra seguindo o falante com 1-2 segundos de atraso. Pesquisas mostram melhora significativa na precisão da pronúncia, entonação, ritmo, sons conectados, compreensão auditiva e fluência na fala.

Técnica de shadowing: leia o guia completo passo a passo →